How to Reset the Maintenance Light on the New Mondeo?

1 Answers
DeLeo
07/29/25 6:15pm
Method to reset the maintenance light on the New Mondeo: 1. Press the one-touch start button below the steering wheel to start the vehicle's engine; 2. Press the OK button on the left multifunction steering wheel; 3. Press the SET button below the left side of the steering wheel; 4. The left instrument panel will display the oil life, press the OK button to reset; 5. Then press the OK button on the right side of the multifunction steering wheel to complete. The New Mondeo is the flagship model of Changan Ford, with body dimensions of 4873mm in length, 1852mm in width, and 1470mm in height, a wheelbase of 2850mm, equipped with a 1.5T 182-horsepower L4 engine, matched with a 6-speed automatic transmission.
Was this review help?
12
5
Share
More Forum Discussions

What is the actual fuel consumption of the 2020 Roewe i5?

2020 Roewe i5 has an actual fuel consumption of 5.5L per 100 kilometers. Below is the relevant introduction about the Roewe i5: 1. Exterior: The front grille adopts a polygonal design with bright strips for extension, ensuring the car's premium feel while visually widening the body, making it look more stable and grand. 2. Interior: The main color scheme is red and black, which looks very passionate yet fashionable, with high value retention. The interior is wrapped with a large amount of soft materials, and the details are handled quite well.
15
4
Share

Can you change lanes over a solid white line?

Generally, you cannot change lanes over a solid white line. However, specific situations require specific analysis. For example, if there is a road accident ahead or a vehicle breaks down, causing vehicles behind to remain stationary for a long time, you may cross the solid white line to change lanes. In such cases, there will usually be traffic police directing on-site, and you can change lanes according to their instructions. More information about solid white lines is as follows: 1. Introduction: A solid white line is a type of lane divider used to separate traffic flows moving in the same direction. It is usually marked with white dashed/solid or yellow dashed/solid lines. Generally, a solid white line is used to separate lanes moving in the same direction and should not be crossed to change lanes. 2. Crossing a solid white line: Crossing a solid white line is considered a violation of traffic markings and can easily be captured by electronic surveillance, leading to corresponding penalties. Dangerous behaviors such as overtaking, making a U-turn, or reversing over a solid white line, if captured by electronic surveillance or on-site by traffic police, usually result in a fine and a deduction of 3 points. If a traffic accident occurs due to crossing a solid white line, the vehicle that crossed the line will bear the primary responsibility for the accident.
13
2
Share

What are the reasons why the Malibu trunk cannot be opened?

The Malibu trunk may not open due to issues with the linkage rod or lock cylinder. Below are specific explanations for car trunk switch operations: 1. Remote key fob from outside the vehicle: The most common method to open the trunk from outside is via the remote key fob. Simply press the trunk release button (usually marked with a car trunk icon) on the key fob. Some vehicle models without a dedicated trunk button can unlock the trunk by pressing the general unlock key. 2. Interior control switches: Interior trunk release mechanisms include button-type and lever-type. Button locations vary by manufacturer and model, typically found on the left side of the steering wheel or central control area. For example, the Sagitar's trunk button is usually located on the door panel. Some models use a lever mechanism instead, generally positioned on the lower left side of the driver's seat or steering wheel.
9
2
Share

Can a C1 license drive a 4.2-meter truck?

C1 license can drive a 4.2-meter truck because the holder of a C1 license is allowed to drive trucks with a total length not exceeding 6 meters. Permitted vehicle types for C1: The scope of C1 license includes small and mini passenger vehicles, light and mini cargo vehicles; light, small, and mini special operation vehicles; and small passenger vehicles with seating capacity of 9 or fewer. C1 license cannot drive: large buses, tractors, city buses, medium buses, large trucks, ordinary three-wheeled motorcycles, ordinary two-wheeled motorcycles, light motorcycles, wheeled self-propelled machinery, trolleybuses, and trams. Additionally, a C1 license cannot drive vehicles with more than 9 seats or trucks with a total length exceeding 6 meters. Age requirements for C1: The minimum age for a C1 license is 18 years old, with no upper age limit. However, applicants aged 70 or above must pass tests on memory, judgment, and reaction abilities.
14
1
Share

How to Turn Off the Air Conditioning in a Volkswagen Passat?

Here are the methods to turn off the air conditioning in a Volkswagen Passat: 1. Method one: Press the automatic operation button (AUTO) once. Blue indicates cooling, and red indicates heating. Reduce the fan speed to OFF, or you can directly press the ECON button. 2. Method two: For manual air conditioning, first turn on the fan, then press the A/C switch (the light should be on) and adjust the temperature to a suitable level (blue is for cooling). 3. Method three: For automatic air conditioning, press the AUTO button for automatic operation (automatic air conditioning), first turn on the fan, then press the A/C switch (the light should be on) and adjust the temperature to a suitable level (specific degrees).
14
1
Share

How often should brake pads be replaced for private cars?

The lifespan of brake pads is difficult to define with a specific mileage or time. Brake pads need to be replaced under the following circumstances: 1. Check the thickness: Normally, a brand-new set of brake pads is about 1.5cm thick. When the visible thickness is less than 0.5cm, it's time to prepare for replacement. Each brake pad also has a raised indicator on both sides, which is about 2-3mm thick—this is the minimum replacement limit for the brake disc. If the brake pad thickness is level with this indicator, it must be replaced immediately. 2. Listen for sounds: If you hear a metallic scraping or hissing sound when lightly applying the brakes, the brake pads must be replaced immediately. This indicates that the limit indicators on both sides of the brake pads are directly grinding against the brake disc, meaning the pads have exceeded their limit. 3. Feel the resistance: If you notice that braking requires more effort, feels softer than usual, or requires deeper pedal travel to achieve the same braking effect, and if the pedal position feels noticeably lower during emergency braking, it's likely that the brake pads have lost most of their friction. In this case, they must be replaced immediately to avoid serious accidents.
2
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.