How to reset the maintenance light on the new H6?
2 Answers
Here is the method to reset the maintenance light on the Haval H6: 1. Insert the key and keep the engine off. 2. Press the reset button once, and switch and select the system that needs adjustment according to the display. 3. Turn the ignition switch to the second gear and hold the reset button for about 3 seconds. 4. The multifunction display on the instrument panel will show the relevant icon, indicating that the maintenance light has been successfully reset. Here is some related information about the maintenance light: 1. The maintenance light is a device that reminds the owner to perform vehicle maintenance in a timely manner. 2. After performing vehicle maintenance, the maintenance light can be reset to zero, allowing the system to recalculate the next maintenance time or mileage.
Having driven for so many years, I know resetting the maintenance light is a common task. The procedure for the new H6 is straightforward: First, completely turn off the engine and sit tight without rushing. Then, press and hold the trip reset button on the dashboard—usually located near the speedometer. Keep holding it, turn the key to the ACC position without starting the engine. Watch the maintenance light, and release the button once it goes off—the whole process takes about 10 to 15 seconds. This method works for most model years; if it doesn’t, try accessing the ‘Maintenance’ option in the settings menu via the steering wheel’s multifunction buttons. The key is to perform the steps smoothly without interrupting the power supply, and ensure the battery has enough charge. After resetting the light, schedule maintenance promptly, or the system might trigger the warning again. Sometimes, the light won’t go off due to poor button contact or an unreset maintenance interval—the manual has detailed steps as a backup. Remember, this light serves as a reminder for vehicle maintenance—don’t ignore it to avoid costly repairs down the road.
