How to Reset the Maintenance Light on the New Ford Mondeo?

1 Answers
KinsleyAnn
07/29/25 6:07pm
Car maintenance refers to the preventive work of regularly inspecting, cleaning, supplying, lubricating, adjusting, or replacing certain parts of the car, also known as car servicing. The steps to reset the maintenance light on the new Ford Mondeo are as follows: 1. Press the Mondeo's one-touch start button to ignite. 2. Click the SET button on the left side of the multifunction steering wheel to enter settings. 3. Press the "-" button on the right side of the steering wheel to clear the dashboard display items. 4. Finally, press the OK button on the left side of the steering wheel to reset the Mondeo maintenance light. 5. Turn the ignition switch back on or start the vehicle to check if the car maintenance light has been successfully cleared. If it hasn't been cleared successfully, repeat the above steps.
Was this review help?
18
1
Share
More Forum Discussions

How to Clean the Car Roof Lining?

The method for cleaning the car roof lining is as follows: 1. Recline the seats and cover them with towels or seat covers. Use a high-power vacuum cleaner and a brush to clean the interior roof lining, removing surface dust and dirt that easily falls off; 2. Spray neutral foam cleaner on the fabric of the interior roof lining, wait a few minutes, and then use a specialized cleaning soft brush or a wrung-out car cleaning cloth to repeatedly wipe; 3. Use a clean cotton cloth to smooth along the direction of the fabric's nap, restoring it to its original state. The functions of the car roof lining are: 1. Enhancing the interior decoration while also improving insulation and heat resistance effects between the interior and exterior; 2. Reducing interior noise and improving sound absorption; 3. Enhancing passenger comfort and safety.
9
5
Share

What car does Tang Cheng drive in My Mowgli Boy?

In My Mowgli Boy, the car driven by Tang Cheng is a 2019 Jeep Wrangler. Below are the specific details about the Jeep Wrangler: 1. Vehicle positioning: The Jeep Wrangler is positioned as a midsize SUV, with a length of 4334mm, width of 1894mm, height of 1841mm, and a wheelbase of 2459mm. 2. Configuration: It is equipped with features such as rear parking radar, reverse camera, cruise control, off-road driving mode switching, engine start-stop, hill start assist, hill descent control, and keyless start system. 3. Suspension: Both the front and rear suspensions of the Wrangler are multi-link independent suspensions, with electronic hydraulic power steering, and the body structure is non-load-bearing.
3
3
Share

How to Adjust Idle Speed for Sedans?

To adjust the idle speed of a car, it is recommended to pull over safely and have it inspected at the nearest auto repair shop. The reasons for unstable idle speed are as follows: 1. Engine mechanical failures such as improperly closed valves or uneven cylinder compression. 2. Dirty throttle body or throttle damage in the air supply system. 3. Low fuel supply pressure or significant pressure fluctuations, severe carbon buildup in fuel injectors, etc. Generally, the more cylinders an engine has, the less noticeable the idle vibration. Inline six-cylinder engines, due to their inherent ability to balance vibrations, offer the best smoothness. On the other hand, the increasingly popular three-cylinder engines have poor inherent smoothness and require balance mechanisms to maintain normal operation.
7
0
Share

What is the wheelbase of the Tiggo 5?

The wheelbase of the Tiggo 5 is 2610 mm. The Tiggo 5 is a compact car under the Chery Automobile brand, with dimensions of 4506 mm in length, 1841 mm in width, and 1740 mm in height. In terms of exterior design, the front lower section of the Tiggo 5 features an abstract X-shape, with the headlights and grille adopting an integrated design. The rear taillights incorporate LED light strips, encircling the central reverse light bulb, successfully showcasing Chery's new styling approach. For the interior, the Tiggo 5, similar to the previously released TX concept car, features an exaggerated cannon-style instrument panel and a large-sized LCD screen in the center console, giving the cabin a clean and more layered appearance.
3
5
Share

What engine does the Mercedes-Benz CLA use?

The Mercedes-Benz CLA is equipped with 1.3T and 2.0T M270 series four-cylinder turbocharged engines. The 1.3T engine delivers a maximum horsepower of 163 HP, maximum torque of 250 Nm, and maximum power of 120 kW; while the 2.0T engine produces a maximum horsepower of 224 HP, maximum torque of 350 Nm, and maximum power of 165 kW. In terms of exterior design, the Mercedes-Benz CLA differs from traditional models with its protruding grille design, where the grille extends further forward than the headlights, creating a three-dimensional effect. The large-sized air intake grille features a metal mesh layout, a design Mercedes-Benz refers to as the diamond grille design. A chrome strip running across the grille highlights the vehicle's sporty character.
11
3
Share

What to Do When Passat Shows 'Key Not Found'?

Passat shows 'Key Not Found' solution: 1. Place the chip key against the keyless button to ignite; 2. Replace the large coin battery promptly. The Passat is a mid-sized 4-door 5-seater sedan with body dimensions of 4933mm in length, 1836mm in width, 1469mm in height, and a wheelbase of 2871mm. It is equipped with a 1.4T turbocharged engine and a 7-speed dual-clutch transmission, delivering a maximum power of 100 kW and a maximum torque of 250 Nm. Its drivetrain is front-engine, front-wheel drive, with a front suspension using MacPherson independent suspension and a rear suspension employing a multi-link independent suspension.
8
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.