How to Reset the Maintenance Light on the New Accord?

1 Answers
JesseFitz
07/30/25 9:50am
Honda Accord maintenance light reset method is as follows: 1. Start the engine. 2. Press and hold the "TRIP" button until the mileage and "OIL-LIFE" start flashing, then release the button. 3. Sometimes it may require pressing and releasing the button several times to reset the maintenance light. Below is relevant information about the Honda Accord maintenance light: 1. When the remaining distance to the next maintenance is less than 1500 kilometers, the oil inspection indicator light will appear, along with other upcoming maintenance service items. After completing the maintenance service, you can reset the engine oil inspection system information. 2. The purpose of the Accord's maintenance light is to remind the owner that the vehicle requires maintenance. When it lights up, you should visit an authorized Honda service center as soon as possible. The service personnel will reset the maintenance light using a diagnostic tool after the maintenance, which is another method of resetting the light.
Was this review help?
19
5
Share
More Forum Discussions

What is the difference between two and a half turns and one and a half turns of the steering wheel?

Here are the specific differences between two and a half turns and one and a half turns of the steering wheel:1. Transmission aspect: The number of turns the steering wheel can make is determined by the transmission ratio of the steering system. The larger the transmission ratio, the more turns the steering wheel can make, making steering lighter, but the car's handling becomes less sensitive; the smaller the transmission ratio, the fewer turns the steering wheel can make, making steering heavier, but the direction is very sensitive, with the car turning sharply even with a small angle of the steering wheel. 2. Gravity aspect: A steering wheel that can make two turns is lighter than one that can make one and a half turns, but the handling sensitivity is not as good as that of a car with one and a half turns. Cars that focus on comfort have steering wheels with more turns, while those that focus on handling have steering wheels with fewer turns.
9
0
Share

Is adding one liter of engine oil too much for a underbone motorcycle?

A bit too much, which may cause oil burning or reduced power. It's better to drain some if possible. Here are the relevant details: 1. Oil quantity: For most common domestic motorcycles below 150CC, the oil quantity usually doesn't exceed one liter. Never fill the motorcycle engine oil to full capacity - the oil level should always be checked using the dipstick or oil inspection window. 2. Dangers of overfilling: Overfilling engine oil can cause multiple issues including engine overheating, power loss, oil leakage, blue smoke from the engine, and clutch disengagement failure. 3. Dipstick position: The oil dipstick is located at the rear of the right side cover of the engine. After removal, you'll see a crosshatched area at the end of the dipstick - this is the oil level indicator zone. The two ends of this zone represent the upper and lower limits of the oil quantity.
7
0
Share

Can a car run long distances in 40-degree high temperature weather?

40-degree high temperature weather is suitable for long-distance car travel. Below are specific instructions regarding precautions for long-distance travel: 1. Conduct a comprehensive inspection before starting: Before departure, perform a thorough inspection of the vehicle, including checking for oil or water leaks, ensuring tire pressure is appropriate, verifying that the fuel tank has enough fuel to reach the planned refueling point, and confirming the spare tire is in good condition. After starting, initially drive in second gear at low speed, test the brakes to ensure they are functioning properly, and only proceed to normal driving once everything is confirmed to be in order. 2. Change drivers every two hours: During long-distance driving, fatigue driving should be avoided as it is one of the main causes of accidents. If there is a co-driver, it is best to switch every 2 hours. If you feel drowsy or tired, you should stop and take a short break, never force yourself to continue driving.
2
2
Share

Why do some people drive at 160 km/h on the highway?

Because they have navigation alerts combined with radar detectors in their cars, coupled with a mentality of taking chances and seeking thrills, some people drive at 160 km/h on the highway, but this is a traffic violation. Here are the relevant details: 1. Speed limit of 120: The speed limit on domestic highways is 120 km/h, with a maximum tolerance of up to 130 km/h, as there is a 10% redundancy for speed limit violations. If caught driving at 160 km/h, you will be penalized with 6 demerit points. Most importantly, at a speed of 160 km/h, any accident would almost certainly be fatal. For your own safety and that of others, do not speed. 2. Precautions: Safe driving on highways requires maintaining a safe distance from the vehicle ahead, observing more when overtaking, staying away from large vehicles, and avoiding sudden braking.
1
0
Share

How to Solve the Steering Wheel Noise Issue in Envision?

Here are the solutions for the steering wheel noise issue in Envision: Friction between the steering column and floor mat: This is mainly caused by oversized aftermarket floor mats (such as full-coverage mats) that come into direct contact with the steering column. The movement of the steering column creates friction. The solution is to adjust the position of the floor mat or replace it. Faulty clock spring in the steering wheel: Particular attention should be paid if the steering wheel has been disassembled before. The issue could be a broken clock spring or an unplugged clock spring connector. Replace or secure it accordingly. Aging or loose steering tie rod end: Replace the steering tie rod end, but a wheel alignment is required after replacement.
5
1
Share

What is the reason for the failure of the automatic locking latch on the Sail?

It indicates a problem with the motor, which needs to be replaced. Below is relevant information: Engine: The Sail is equipped with a small-displacement 1.2L naturally aspirated engine, with a maximum power of 64kW and a maximum torque of 115Nm. The Sail comes with both 1.4L and 1.2L engines, both belonging to the S-TEC series. Vehicle Appearance: The sedan (hatchback) version of the Sail has body dimensions of 4249mm in length, 1690mm in width, and 1503mm in height, with a wheelbase of 2465mm. The overall size is considered average among small cars. The Sail features a design with the A-pillar moved forward and the C-pillar moved backward, along with a centrally positioned fuel tank. This design is similar to that of the Honda Fit, with the advantage of improving space utilization in small cars, achieving a spacious interior effect.
17
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.