How to reset the maintenance light on the Haval H2 one-key start?

1 Answers
Ana
07/30/25 2:02am
First, press the one-key start to start the engine and turn on the ignition switch; otherwise, the maintenance light cannot be canceled. After starting the engine, click the SET button on the right side of the multifunction steering wheel to set the maintenance status. Next, press the downward button on the left side of the multifunction steering wheel twice. When the dashboard displays the OIL interface, press and hold the MODE button for more than 5 seconds. Wait until the OIL symbol on the dashboard starts flashing, then quickly press the MODE button more than 5 times. Wait for the OIL symbol to flash and then turn off.
Was this review help?
7
4
Share
More Forum Discussions

How many liters of engine oil does the Audi Q7 require?

Q7 currently comes in 2.0T and 3.0T variants. Generally, the 2.0T requires 5 liters of engine oil, while the 3.0T requires 7.5 liters. Below is a relevant introduction about the Audi Q7: Exterior: The Q7 is a perfect combination of engineering and aesthetics. In terms of exterior design, the Audi Q7 is in no way inferior to American SUVs, with its exaggerated large grille exuding a strong presence, making it a true off-road vehicle. The 3D front grille of the Audi Q7 features horizontal chrome trim; additionally, it comes with side trim strips bearing the quattro logo and arrow-shaped LED matrix headlights. Interior: The interior style reflects Audi's characteristic precision, with the choice of materials and color combinations exuding just the right amount of luxury. The slightly driver-oriented design of the center console allows for easier operation, and the multimedia system is also very user-friendly.
11
0
Share

What type of gasoline should an Audi Q2 use?

Audi Q2 is recommended to use 95-octane or higher gasoline. Below is an introduction to the Audi Q2: Exterior: The Q2 emphasizes a sporty style, with its smooth roofline giving it a coupe-like feel. The front fascia incorporates Audi's new family design language, with eagle-eye headlights somewhat resembling the new A3. The hexagonal grille, along with the full and muscular body lines, particularly the prominent rear wheel arch lines, will become signature design elements of the Q2. Interior: The Audi Q2's interior is also highly distinctive, featuring a design similar to the A3, especially the circular air vents and minimalist dashboard layout. However, the Q2's interior leans more toward youthfulness and fashion, primarily because areas like the dashboard, gearshift console, door armrests, and seats are not covered in plain black plastic but can be customized in yellow, orange, or red, adding more visual depth to the cabin. Additionally, the interior trim offers options like white plastic or brushed aluminum, while seats come in fabric or nappa leather, making diverse customization a standout feature of the Q2's interior.
6
3
Share

Does the new Qashqai have a break-in period?

Nissan's new Qashqai does have a break-in period, which is within the first 1,600 kilometers. Here are the precautions to take during the break-in period for the Nissan Qashqai: 1. Warm up the engine before starting; shortening the warm-up time can extend the lifespan of the three-way catalytic converter, improve the conversion rate of pollutants in the exhaust, and save fuel. During the break-in period, avoid slamming the accelerator or brakes. 2. Avoid high-speed driving. New vehicles have speed restrictions in the initial driving phase. Domestic vehicles generally have a speed limit of 40-70 km/h, while imported vehicles typically restrict speed to within the first 1,000 kilometers, with the speed not exceeding 80% of the maximum speed when the accelerator is fully pressed. Additionally, monitor the engine tachometer and speedometer to ensure the engine and vehicle operate at moderate speeds. 3. Avoid overloading. Running a new vehicle at full capacity can damage components. Within the first 1,000 kilometers, domestic vehicles should not exceed 75%-80% of the rated load, and imported vehicles should not exceed 90%. 4. Do not remove the speed limiter prematurely. The speed limiter is a throttle device installed between the carburetor and the intake pipe. It should be removed after the initial 1,000 kilometers, based on the initial maintenance condition. 5. Avoid long-distance trips. Long trips in a new vehicle can cause the engine to operate continuously for extended periods, increasing component wear. 6. Avoid emergency braking. Emergency braking not only shocks the braking system during break-in but also increases the impact load on the chassis and engine. Therefore, avoid emergency braking within the first 300 kilometers of driving.
18
2
Share

What is the Chassis Analysis of the BMW 3 Series?

The new generation standard-wheelbase 3 Series, with the chassis code G20, is built on BMW's renowned CLAR rear-wheel-drive platform, sharing most of the mechanical and electronic architecture with higher-level models, and introducing more information-based and intelligent features. Analysis of the Double-Joint Front Suspension: In the editor's memory, the BMW 3 Series front suspension adopts a double-joint design, an upgrade from the MacPherson strut. Below is relevant information about BMW: Models: BMW is a German automobile manufacturer with a wide range of cars and SUVs. Many BMW models have been locally produced, such as the 1 Series, 3 Series, 5 Series, X1, X2, X3, etc. The BMW 3 Series is a mid-size car under BMW, available in both standard-wheelbase and long-wheelbase versions. Engine: The domestically produced BMW 3 Series models use three types of engines: a low-power 2.0-liter turbocharged engine, a medium-power 2.0-liter turbocharged engine, and a high-power 2.0-liter turbocharged engine.
3
3
Share

Why Does the BMW 3 Series Squeak When Braking at Low Speeds?

Brake squeaking is often caused by issues with the brake guide pins. Rust or dirty lubricant inside the brake guide pins can lead to poor retraction. Cleaning the brake guide pins, sanding them with fine sandpaper, and applying fresh lubricant can resolve the issue. It could also be a problem with the brake caliper, which may require replacement, though this is a less common fault. The following situations can cause brake noise: Use of low-quality or overly hard brake pads: If inferior or excessively hard brake pads are used, they may produce a squeaking sound when rubbing against the brake rotor during braking. Always opt for high-quality brake pads when replacing them. Sand or foreign objects between the brake pads and rotor: While driving, it's inevitable to encounter complex road conditions. Due to the unique design of disc brakes, sand or foreign objects may get lodged between the brake pads and rotor, causing noise during braking. Severe wear on the brake rotor: Using low-quality brake pads or having hard foreign objects between the pads and rotor can lead to abnormal wear on the rotor. If the rotor is excessively worn, it may also produce a squeaking sound when braking. Brake pad wear indicator: If the brake pads wear down to the warning line, they will emit a squeaking alarm sound, indicating that they need to be replaced promptly.
13
4
Share

Is the BMW 5 Series a B-segment car?

The BMW 5 Series is a C-segment car. Here are the relevant details about the BMW 5 Series: Configurations: It offers optional packages including the Innovation Package, Entertainment Package, Comfort Package, and Winter Package, providing users with features such as LED adaptive headlights, automatic high-beam switching, Harman Kardon sound system, wireless charging, Wi-Fi hotspot with included data package, comfort access, auto-dimming rearview mirrors, front/rear seat heating, and four-zone air conditioning for enhanced comfort. Powertrain: In terms of power, the models with the designation 525Li/525i are equipped with a low-power version of the B48 2.0T engine, delivering 135kW (184PS) and 290N-m of torque. The 530Li/530i models feature a high-power version of the 2.0T engine, producing 185kW (252PS) and 350N-m. The most powerful 540Li/540i models come with the B58 3.0T engine, generating 250kW (340PS) and 450N-m, all paired with a standard ZF 8AT transmission.
15
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.