How to Reset the Maintenance Light on the Great Wall Wingle 5?
3 Answers
To reset the maintenance light on the Great Wall Wingle 5, follow these steps: 1. With the engine off, press and hold the "Reset" button. 2. While holding the reset button, insert the key and start the engine. 3. After the vehicle starts, release the reset button and briefly press the clock adjustment button once. 4. The maintenance cycle light will display in reset mode and return to the normal view after several seconds. The role of the maintenance light in a car is as follows: 1. Resetting the maintenance light is a necessary operation after car maintenance. 2. This maintenance light serves as a fixed mileage reminder function, with no other connection to vehicle operation, simply reminding the driver that maintenance is required upon reaching the specified mileage.
I've been driving for many years, and resetting the maintenance light on the Fengjun 5 is actually quite simple and doesn't require any tools. First, find a flat place to park and turn off the engine—don't leave it running. Then locate the ODO button on the dashboard, the one that shows the mileage, and hold it down without releasing. Next, slowly turn the key to the ACC position—remember, not to start the engine, just the half-power state. Wait for 5 to 10 seconds, and the maintenance light will either turn off by itself or flash a few times before disappearing. After completing the operation, it's best to restart the car to confirm the indicator light is indeed gone. The maintenance light comes on to remind you to change the oil or perform a check-up. Ignoring it for too long may lead to increased engine wear, higher fuel consumption, and other issues. I often do this myself to save a trip to the repair shop and extend the car's lifespan. It's recommended to reset it after each maintenance so it can start counting the next cycle anew.
As a regular car owner who enjoys figuring out these little tricks, I find resetting the maintenance light on the Great Wall Wingle 5 quite simple: First, turn off and park the car securely. Press and hold the ODO button without releasing it, while turning the key to the ACC position. Wait a few seconds and the light should go off. If there's no response, try again or check the manual. This light is a friendly reminder that the maintenance period is due—resetting it marks a fresh start. Delayed maintenance may affect vehicle performance, but resetting the light is a breeze. Always verify the button position before proceeding to avoid wasted effort. Personally, I feel the car drives better after each reset. I recommend learning this method—it saves money and hassle.
