How to reset the maintenance light on the Geely Vision X6?
4 Answers
The method to reset the maintenance light on the Geely Vision X6 is: 1. Press and hold the mute button on the right side of the steering wheel for a few seconds; 2. After the display responds, press the mode button once to activate the menu; 3. Once the menu is activated, press the mode button again to enter the menu; 4. Select maintenance reset to complete the process. The purpose of the maintenance light is to record the mileage of important components, acting like a timer to remind the owner and automotive maintenance personnel. Taking the 2020 Geely Vision X6 as an example, its body dimensions are: length 4546mm, width 1834mm, height 1715mm, wheelbase 2661mm, fuel tank capacity 55l, and curb weight 1550kg.
Resetting the maintenance light for the Vision X6 is something I've done quite a few times myself, and it's actually quite simple. You need to sit in the driver's seat, insert the key and turn it to the ON position—don't start the engine, just make sure the dashboard lights up. Then locate the TRIP button or ODO reset button on the dashboard, press and hold it for about 5 to 10 seconds, and the maintenance light will flash and then turn off. If it doesn’t respond, the button might be in the wrong position or the car isn’t in the ON position—just try again. Make sure the car has already undergone maintenance before resetting; otherwise, if the light turns off, you might miss the next service reminder. For such a small task, there’s no need to go to a small shop outside—doing it yourself saves time and money. But if it doesn’t work, it’s better to visit an authorized service center for inspection to avoid system issues affecting driving safety. The whole process takes just half a minute, and once you get used to it, it’s quite convenient.
When I drive my Geely Vision X6, I always reset the maintenance light myself—it's not troublesome at all. Here's how: Insert the key and turn it to the ACC or ON position without starting the engine. Then, press and hold the odometer reset button (the small one labeled 'TRIP') at the lower right corner of the dashboard for more than 5 seconds, and the light will automatically turn off. Remember, the maintenance must be completed before resetting; otherwise, the light will just come back on, making your effort pointless. If pressing the button doesn’t work, it might be due to a worn-out button or a stuck maintenance reminder system—don’t force it. Instead, check the manual or search online for additional confirmation. DIY maintenance has many benefits: it saves money and helps you understand your car’s condition better. Regular resets keep the reminder system accurate, which can extend your car’s lifespan in the long run.
Let me tell you how to reset the maintenance light on the Vision X6. It's super straightforward. Turn the key halfway to the ON position without starting the car. Then, press and hold the ODO reset button on the instrument panel for a few seconds until the light goes off. If it doesn't respond, check if the key is in the correct position. After resetting, the light won't stay on, so it won't affect your driving mood. Remember to do this after maintenance to avoid missing the next service. It's simple and quick, done in under a minute.
