How to reset the maintenance light on the Geely Vision S1?

1 Answers
VanJuliana
07/25/25 12:58am
The steps to reset the maintenance light on the Geely Vision S1 are: 1. Turn off the ignition switch; 2. Press and hold both arrow buttons simultaneously, then turn on the ignition switch; 3. After the ignition switch is on for about 3 seconds, release both arrow buttons; 4. The display will then show the maintenance menu, asking if you want to reset; 5. Press and hold the SET button for more than 3 seconds; 6. Press the MODE button; 7. Turn off the ignition switch to complete the reset. Taking the Vision S1 2019 Upgrade 1.5L Manual Happiness Edition as an example, its body dimensions are 4465mm in length, 1800mm in width, and 1535mm in height, with a wheelbase of 2668mm, and the body structure is a 5-door, 5-seat SUV.
Was this review help?
16
1
Share
More Forum Discussions

What is the size of the Audi A6 wiper blade?

Audi A6 wiper size is 26+20, the wiper is used to wipe rain. Function of vehicle wipers: The rubber wiper blade can maintain sufficient moisture. Only with sufficient moisture can it have excellent flexibility to maintain close contact with the car window glass. Vehicle wiper maintenance methods: To extend the service life of the wiper, it is best to avoid prolonged exposure to the sun. Another important point to note is that many car owners tend to only turn on the wiper to sweep away sand particles when they find dust on the glass. In fact, doing so will damage the rubber blade of the wiper and the car glass. Therefore, it is advisable to spray some cleaning fluid before turning it on.
2
4
Share

How to Modify Car Emblems Without Breaking the Law?

Modifying car emblems in any way is illegal. Emblems, along with headlights, suspensions, and vehicle height, are not allowed to be altered. If a car owner changes the vehicle's emblem without authorization, making it inconsistent with the registered brand, it can complicate accident investigations. Both citizens and traffic police may find it difficult to identify the vehicle's true brand, causing inconvenience in handling accidents. According to national regulations, the trademark and brand of a motor vehicle must not be altered. Unauthorized changes, replacements, or modifications to the vehicle's emblem may result in fines under motor vehicle management laws. If the modifications fail to meet regulatory standards, traffic authorities may withhold the vehicle's registration certificate and require the owner to rectify the issue within a specified period.
2
1
Share

What are the symptoms of insufficient engine oil in a vehicle?

Insufficient engine oil can lead to inadequate lubrication, resulting in dry friction, elevated water temperature, valve noise, and knocking sounds. In severe cases, it may cause cylinder scuffing and damage to engine mechanical components such as the crankshaft and crankshaft bearings. Signs of low engine oil can be observed by: checking for blue smoke from the exhaust pipe during a cold start. Also, observe if there is excessive blue smoke when accelerating hard while driving or idling. Use the dipstick to check if the oil is depleting too quickly. Insufficient oil will lack adequate lubrication, accelerating wear on engine components like the crankshaft, bearings, sleeves, and pistons. This leads to increased engine temperature, reduced power, louder noise, and in severe cases, bearing seizure, cylinder scuffing, or even engine failure requiring replacement.
2
0
Share

What does the traffic violation code 1345 for motor vehicles crossing prohibited markings mean?

Motor vehicle violation of prohibited marking 1345 means that the vehicle has violated the instructions of prohibited markings, including driving over double yellow lines, parking in areas marked with no-parking lines, etc. Below is relevant information about traffic violation codes: Meaning of violation codes: Traffic violation codes consist of four to five digits, categorized according to the principles in traffic laws. The sequence from left to right represents: one digit for behavior classification code, one digit for penalty point classification code, and two digits for sequential code. Methods for violation inquiry: Vehicle owners can check specific traffic violations through the traffic violation code table, or inquire about violation information via 12123, terminal machines at traffic police station halls, or online platforms.
17
2
Share

Should You Start an Automatic Car in P or N Gear?

Automatic cars can be started in either P or N gear. Here is some relevant information about automatic transmissions: 1. Definition: An automatic transmission typically refers to a car's automatic gear-shifting mechanism. While driving, the automatic transmission's control system selects the appropriate gear based on the engine's speed and load, replacing the driver's subjective judgment of timing and gear-shifting operations. 2. Automatic Principle: In an automatic transmission, the engine's power is transmitted through the gearbox, which is also a key factor affecting fuel consumption. Generally, an automatic transmission consumes over 10% more fuel than a manual transmission. Whether manual or automatic, the more gears a transmission has, the more fuel-efficient it tends to be.
8
3
Share

What is the production volume of BYD Qin Plus DM-i?

BYD Qin Plus DM-i's production volume in April was 5,000 units. Dimensions: The BYD Qin Plus DM-i has a body length of 4765(mm), a width of 1837(mm), a height of 1495(mm), and a wheelbase of 2718(mm). Powertrain: The 55KM model is equipped with a 1.5L naturally aspirated engine, delivering a maximum horsepower of 110Ps, maximum power of 81kW, and maximum torque of 135N·m, paired with an E-CVT continuously variable transmission. It also features an electric motor with a maximum horsepower of 179Ps and maximum power of 132kW.
18
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.