How to reset the maintenance light on the Emgrand GS manual transmission?
2 Answers
The steps to reset the maintenance light on the Emgrand GS manual transmission are as follows: 1. Turn off the ignition switch; 2. Press and hold both arrow buttons simultaneously, then turn on the ignition switch; 3. After the ignition switch is turned on for about 3 seconds, release both arrow buttons; 4. The display will then show the maintenance menu, asking if you want to reset; 5. Press and hold the SET (reset) button for more than 3 seconds; 6. Press the MODE button; 7. Turn off the ignition switch to complete the reset. Generally, after maintenance at a 4S shop or repair shop, the technician will use a computer to enter the vehicle system settings and reset the maintenance light.
I've been driving a manual Geely Emgrand GS for three years, and resetting the maintenance light is actually quite simple. First, turn off the engine and return the key to the off position. Use your right hand to press and hold the TRIP button at the lower right corner of the dashboard without letting go. Then, with your left hand, turn the key to the power-on position (be careful not to start the engine). Keep an eye on the dashboard, and after about seven or eight seconds, the maintenance wrench icon will disappear. Release the button, turn off the power, and then start the engine—that's it. Doing it yourself can save you tens of dollars in labor costs, but remember to take a photo of the current mileage before resetting for easier calculation of the next maintenance cycle. Additionally, it's recommended to check the oil dipstick every 5,000 kilometers. In northern winters, it's best to switch to oil with better low-temperature fluidity to make the engine more durable. After resetting, you can also wipe the dust off the dashboard. Paying attention to these details regularly can help prevent car troubles.