How to reset the maintenance light on the Changan CS35?

Can I choose a license plate number before registering a new car?

According to the "Notice on Further Strengthening the Supervision of Production Consistency of Road Motor Vehicles and Registration Management" jointly issued by the Ministry of Public Security and the Ministry of Industry and Information Technology, it can be learned that the cumbersome procedures of vehicle inspection and number tracing before new car registration have been abolished in China. No need for online vehicle inspection: Therefore, nowadays, when buying a car and registering it, there is no need for online vehicle inspection. This means that you can pre-select a license plate number before the vehicle inspection, as long as the insurance and taxes have been paid. You can directly apply for number selection online. Online number selection can be processed in the "Business Center" of the "Traffic Management 12123" APP, specifically in the "New Car Number Selection" section. Handling registration business: After completing the number selection, the system will prompt you to go to the vehicle management office within the specified time to complete the registration business. Otherwise, the selected license plate number will become invalid, and you will not be able to select a number online again within two years.

6

2

Share

What are the functions of a turning gear device?

Turning gear refers to manually rotating the motor a few turns before starting it, to determine whether the load driven by the motor (i.e., the mechanical or transmission part) is stuck and experiencing increased resistance, thereby preventing the motor from being damaged due to an excessive starting load. The turning gear device serves the function of manually rotating the motor a few turns. Its specific functions are as follows: 1. Lubrication: It helps establish an oil film lubrication on all bearings of the steam turbine to reduce dry or semi-dry friction between the journal and the bearing, protecting the journal from damage. 2. Heat dissipation: While ensuring uniform heating or cooling of the rotor, it enhances the rotor's stirring effect on the steam inside the cylinder, reducing the temperature difference between the upper and lower cylinders and the resulting thermal deformation and stress. However, a disadvantage of high-speed turning gear is the large starting torque. To reduce the torque, a jacking oil system is usually employed. 3. Reducing impact: When the steam turbine is started, it can reduce the rotor's inertia and the impact force on the blades. During major overhauls, the turning gear can also be used for machining operations such as turning the exciter's brush slip rings.

1

0

Share

What Are the Hazards of Frequent Ignition to a Car?

Frequent ignition can cause the following specific damages to a car: 1. Wear on the starting mechanism: It wears out the flywheel ring gear, starter pinion, and carbon brushes of the starter motor. 2. Wear on the power mechanism: It causes wear on the cylinder walls and the piston-connecting rod assembly. 3. Harm to the electrical system: It damages the battery and other electrical components. Below are the reasons why a car may fail to start: 1. Dead or damaged vehicle battery: The battery may have reached the end of its lifespan, or it may have been damaged due to prolonged vehicle inactivity; battery drain could be caused by leaving the headlights on for an extended period when the ignition is turned on without starting the vehicle, or by continuously using high-power audio and other high-energy-consuming entertainment systems. 2. Excessive engine carbon buildup: Too much carbon buildup in the vehicle's engine can also make ignition difficult, which is related to fuel quality and poor sealing of the intake valves. 3. Ignition system failure: Poor connections in the low-voltage circuit or leakage in the high-voltage wires can prevent the car from starting.

9

1

Share

Is a Tire Pressure of 200 Normal in Summer?

A tire pressure of 200 is not normal; 200 kilopascals is slightly low. Generally, tire pressure should be between 220 and 240 kilopascals. Tire pressure refers to the air pressure inside the tire. There is a standard tire pressure label on the rear end of the driver's side door, which indicates the pressure when the tire is cold, meaning the tire pressure measured after the car has been parked for at least three hours or driven no more than 1.6 kilometers is accurate. Excessive Tire Pressure: If the tire pressure is too high and significantly above the standard pressure, the tire's friction and adhesion will decrease, affecting braking performance, causing steering wheel vibration, deviation, and reducing driving comfort. It also accelerates wear on the central tread pattern of the tire, shortening the tire's lifespan, increasing vehicle vibration, and indirectly affecting the lifespan of other components. Insufficient Tire Pressure: If the tire pressure is too low and significantly below the standard pressure, it will increase the friction coefficient between the tire and the road surface, leading to higher fuel consumption. It can also make the steering wheel heavy and prone to deviation, among other factors that negatively impact driving safety. Insufficient tire pressure increases the movement of various parts of the tire, causing excessive rolling and abnormal heat generation in the tire.

4

5

Share

Is it possible to replace the engine of a water-damaged car?

After a car has been submerged in water, you can choose to replace the engine, but from an economic standpoint, it is advisable to first have it inspected at a repair shop before proceeding with further actions. Below is more information about car engines: 1. Introduction: An engine (Engine) is a machine that can convert other forms of energy into mechanical energy. Engines can refer to both power-generating devices and the entire machine, including the power unit (such as gasoline engines or aircraft engines). 2. Classification: Engines include internal combustion engines (reciprocating piston engines), external combustion engines (such as Stirling engines and steam engines), jet engines, electric motors, etc. Among them, the valve drive mechanism adopts a hydraulic support roller rocker arm structure. Compared with the commonly used hydraulic tappet valve drive mechanism in modern gasoline engines, this novel valve drive mechanism has the advantage of relatively low friction torque, thus requiring less driving force. This effectively reduces engine power consumption and lowers fuel consumption.

13

1

Share

Can the Hongqi H5 use 92-octane gasoline?

The Hongqi H5 can use 92-octane gasoline, and this model is suitable for 92-octane fuel. This fuel standard can be found in the vehicle manual and on the fuel filler cap. Of course, the Hongqi H5 can also use 95-octane gasoline, which has better anti-knock properties, but for an engine designed to use 92-octane fuel, the difference is minimal. 92-octane gasoline is more suitable for the Hongqi H5: The Hongqi H5 is equipped with a turbocharged engine. While most turbocharged engines require 95-octane gasoline, the Hongqi H5 can run on 92-octane gasoline. For gasoline, different octane ratings indicate different levels of octane content. 92-octane gasoline has an octane rating of 92 and a heptane rating of 8, making it suitable for mid-range vehicles. Higher-octane gasoline has a higher octane rating, which means better stability. Gasoline is a mixture, and the chemical composition of different octane ratings is relatively similar, with strong anti-knock properties. However, to ensure vehicle safety, it is recommended to use the specified fuel separately. The difference between 92 and 95-octane gasoline lies in their octane ratings and quality levels, as explained below: Different octane ratings: 92-octane gasoline contains 92% isooctane and 8% heptane. 95-octane gasoline contains 95% isooctane and 5% heptane. Different gasoline quality levels: The octane rating of gasoline represents its quality. Higher-octane gasoline has better anti-knock properties, which allows the engine to run more smoothly, reduces wear and tear, and provides better protection for the engine. It is recommended that vehicles designed for lower-octane gasoline will not be damaged if higher-octane gasoline is accidentally used. However, the increased octane rating can alter the fuel's ignition point, leading to delayed combustion in the engine. This results in reduced engine performance and thermal efficiency, leading to poorer power output. Using lower-octane gasoline in a vehicle designed for higher-octane fuel can cause engine knocking. This is because the lower octane rating reduces the fuel's ignition point, causing premature combustion during the compression stroke. If combustion occurs before the spark plug ignites, resistance is created during the upward stroke, making the engine run very unstably. Mild knocking may only increase noise without significant engine damage, but severe knocking indicates serious engine issues, affecting driving stability and causing abnormal wear on pistons and cylinders, potentially leading to engine seizure. If the wrong octane gasoline is accidentally mixed or used, simply refueling with the correct octane gasoline next time will restore normal operation. Some drivers believe that using higher-octane gasoline can improve performance, but this is unnecessary if the engine's compression ratio does not require it. At best, higher-octane gasoline may offer slightly better cleanliness and lower carbon emissions.

2

4

Share

How to reset the maintenance light on the Changan CS35?

Can I choose a license plate number before registering a new car?

What are the functions of a turning gear device?

What Are the Hazards of Frequent Ignition to a Car?

Is a Tire Pressure of 200 Normal in Summer?

Is it possible to replace the engine of a water-damaged car?

Can the Hongqi H5 use 92-octane gasoline?

Has the Scrapping Age Limit for Motorcycles Been Abolished?

Does transferring a motorcycle with its license plate affect the original owner?

When will the new Mazda3 be released?

What is the function of an engine condenser?