How to Reset the Maintenance Light on the Buick Verano?
3 Answers
Press the start button to start the SAIC-GM Buick Verano. Use the knob on the left side of the Buick Verano's steering wheel to adjust the dashboard display to the maintenance status. Press the button on the right side of the Buick Verano's steering wheel, then the display will show "Reset," and finally press the confirmation button.
I've been driving a Buick Verano for three years and have reset the maintenance light a few times. The simplest method is to start the vehicle to the power-on state without igniting the engine, press the menu button on the right side of the steering wheel to navigate to the vehicle information interface, and locate the oil life display. Hold down the center confirmation button for five seconds. When the screen prompts for reset confirmation, continue holding until the progress bar fills up to 100%. This method is generally applicable to models after 2018. For older models, you may need to simultaneously press the odometer button on the dashboard and the ignition button. The maintenance light is primarily a mileage-based reminder. After resetting it yourself, remember to check the next maintenance time in the car's system. Be careful not to press the brake pedal during the operation, as it may start the engine and interrupt the process.
I've helped my friend reset the Buick Verano maintenance light twice. The procedure varies slightly by model year: For 2015-2017 models, hold the instrument cluster trip reset stalk while the engine is off, then turn the key to ON position and wait 10 seconds. Post-2018 models are much simpler - after powering on, access vehicle settings through the steering wheel menu, then long-press the confirm button in the oil life section to reset. The key points are: only power on without starting the engine, and hold for at least 3 seconds until the progress bar appears on the instrument cluster. After resetting, start the vehicle to confirm the warning disappears. For newer touchscreen models, directly access the maintenance reset option in settings menu for quicker operation. I recommend writing the next service mileage on a sun visor sticker to avoid forgetting.
