How to reset the maintenance light on the Borgward BX5?

1 Answers
EmeryRose
07/30/25 1:29am
The method to reset the maintenance light on the Borgward BX5 is as follows: 1. With the engine off, turn the ignition switch to the on position; 2. Fully depress and release the accelerator pedal three times within five seconds; 3. If the engine oil change indicator does not appear, the system reset is successful. The Borgward BX5 is a compact SUV produced by Borgward. It features a MacPherson strut front suspension and a multi-link independent rear suspension. In terms of dimensions, the vehicle measures 4490mm in length, 1877mm in width, and 1675mm in height, with a wheelbase of 2685mm. For power, it is equipped with a 1.4T turbocharged engine, paired with a 6-speed automatic transmission.
Was this review help?
4
2
Share
More Forum Discussions

Why can't the steering wheel of a Volkswagen car be turned when it's locked?

The steering wheel of a Volkswagen car may not turn when locked due to the self-locking anti-theft feature of the steering wheel, which is common in most cars. There is a locking groove on the steering shaft and a locking tongue on the bracket. When turned to a certain angle, the locking tongue slides into the groove, locking the steering wheel. Here is additional information: 1. The function of steering wheel lock with one-button start: Steering wheel lock is a simple anti-theft feature. After the car is turned off, turning the steering wheel from the straight position to one direction (usually to the left) by a certain angle will cause a "click" sound, locking the steering wheel. In this locked state, the steering wheel cannot be turned, the key cannot be turned, and the car cannot be started, thus achieving the anti-theft function. 2. One-button start device: The one-button start device is part of a smart car, a button device that simplifies the starting process and can also turn off the engine. This device can be installed at the original key lock position or as an independent panel modification.
10
0
Share

Will points be deducted for not turning off the signal light during a right-angle turn?

For not turning off the turn signal after a right-angle turn in Subject 2 of the driving test, 10 points will be deducted. Below are specific tips for Subject 2 of the driving test: 1. Slow speed: Maintaining a slow speed is the fundamental rule for practicing Subject 2. Ensure the vehicle does not stop while keeping the speed as slow as possible, allowing sufficient time to adjust each operation. 2. Adjust the rearview mirrors: After getting into the car, always adjust the rearview mirrors properly, which is particularly important for reverse parking and parallel parking. 3. Master the three-point alignment method: The three points are the driver's eyes, a reference point on the car, and a reference point on the ground. During Subject 2 operations, it is essential to accurately locate and observe these points to ensure precision. 4. Pay attention to the four corners of the car: The front corner is prone to crossing the outer line during reverse parking, while the rear corner may cross the side lines of the parking space; the front corner may go out of line during curve driving; the front corner may go out of line during a right-angle turn; the front corner may cross the outer line or the left front corner of the parking space during parallel parking, and the right rear corner may cross the right parking space line. Therefore, always be mindful of the four corners and the outer boundary lines.
17
3
Share

Where is the fuel tank switch located in a Mitsubishi SUV?

On the left side near the door of the driver's seat, lift the black square upwards. The dimensions of the ASX are 4295mm × 1770mm × 1615mm (length × width × height), with a wheelbase of 2670mm. Its size is similar to that of the Qashqai, and these two models are direct competitors. The ASX shares the same platform as the Outlander EX. Here is additional information: Structurally, it features an electronically controlled multi-plate clutch-type center differential, with open differentials on both the front and rear axles, and no locking mechanism. Additionally, none of the wheels have electronic brake assist.
14
4
Share

Why is there no sound when Bluetooth is connected to a Volkswagen car?

The following are the reasons why there is no sound after connecting to the car's Bluetooth: 1. The volume on the car navigation system or mobile phone is not turned on; In this case, you can turn up the "media" volume, and the same applies to the car navigation system. 2. Incompatible pairing code: The music playback programming of some mobile phones (such as iPhone) is incompatible with the pairing code of certain car models, so only phone calls can be made but music cannot be played. 3. The multimedia music function of the car Bluetooth is not enabled: You can find the multimedia option on the screen and select Bluetooth to play music. 4. The media audio on the mobile phone is not turned off: This can cause signal interference with the Bluetooth function.
5
4
Share

Should the high beam be reset after use in the Stage 3 lighting test?

In the Stage 3 lighting test, the high beam should be reset after use. Otherwise, it may affect the next student's operation. Here are some precautions for the Stage 3 lighting test: 1. Follow the instructions: Do not complete the vehicle lighting operation steps in advance. The operation must be completed within 5 seconds after the voice broadcast ends. Performing the operation before the voice broadcast is finished will result in a failed test. 2. Adjust your mindset: Before the Stage 3 lighting simulation test, adjust your mindset, stay calm, and avoid consuming stimulating foods. Keep a clear mind during the test and listen carefully to the instructions without panicking. 3. Check the lights before the Stage 3 test officially begins: After walking around the vehicle, adjusting the seat and rearview mirror, and fastening the seat belt, you should check whether the lights are reset.
13
1
Share

Is Interior Leather Recoloring Done by Replacing the Leather or Painting?

Automotive interior recoloring is achieved through painting. Simply put, interior spray painting involves using specialized paint applied to the surface to change its color. It is understood that this method of color change is relatively mature abroad and can ensure that the leather does not fade for a long time. Below is relevant knowledge about automotive interiors: 1. Introduction: Automotive interiors mainly refer to the products used for internal modifications of vehicles, covering all aspects such as steering wheel covers, seat cushions, floor mats, car perfumes, pendants, interior accessories, storage boxes, etc. 2. Scope: Automotive interiors primarily include the following subsystems: dashboard system, auxiliary dashboard system, door trim panel system, headliner system, seat system, pillar trim panel system, other interior trim components, cabin air circulation system, trunk interior system, engine compartment interior system, carpets, seat belts, airbags, steering wheel, as well as interior lighting and acoustic systems, etc.
10
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.