How to reset the maintenance light on the Borgward BX5?

What Causes Increased Fuel Consumption After an Oil Change?

The reasons for increased fuel consumption after an oil change: The viscosity of the new oil is higher than before. For example, if the original oil viscosity was 5w-30 and the new oil viscosity is 5w-40, the increased viscosity leads to greater resistance, resulting in higher fuel consumption. Definition of fuel consumption: Fuel consumption per 100 kilometers refers to the amount of fuel a vehicle consumes when driving a certain speed over 100 kilometers on the road. It is a theoretical indicator for vehicles. Calculation of actual fuel consumption: Fuel consumption per 100 kilometers = Volume of fuel consumed (liters) ÷ Distance traveled with that fuel (kilometers) × 100. For example, if a car consumes 4 liters of fuel to travel 50 kilometers, then the fuel consumption per 100 kilometers = 4 liters ÷ 50 kilometers × 100 = 8 liters/100 kilometers. The fuel consumption per 100 kilometers is not fixed; factors such as road conditions, load, temperature, and whether the air conditioning is on can all affect fuel consumption.

4

Share

What is WEX car?

There is no domestic car brand named WEV, but there is a car brand named WEY. WEY comes from Chinese SUV manufacturer Great Wall Motors. The founder of Great Wall Motors, Wei Jianjun (Jack Wey), serves as the product manager, gathering an international R&D team to create China's luxury SUV brand. Below is an introduction to the WEY brand: 1. WEY is a luxury SUV brand developed by Great Wall over four years. Established in 2016, its product lineup includes the VV7, VV6, VV5, and VV7 PHEV new energy series models. The WEY VV7 is the first SUV model under the Great Wall WEY brand. Positioned as a mid-size luxury SUV, it was launched on April 19, 2017. 2. The WEY VV7 features a highly technological exterior design with dynamic body lines. In terms of power, it is equipped with a 4-cylinder 2.0T turbocharged engine, delivering a maximum power of around 170 KW and a maximum torque of 360 to 387 N·M. The transmission is a 7-speed dual-clutch gearbox.

12

2

Share

Are New Energy Vehicles Only Eligible for Green License Plates?

New energy vehicles must be registered with green license plates. If a new energy vehicle has already been registered and installed with a regular motor vehicle license plate, it is not mandatory to switch to a green license plate. However, if the regular license plate is lost, the vehicle must then be registered with a green license plate. More information about vehicle license plates is as follows: 1. For new energy vehicles that have already been issued regular license plates, the owner may voluntarily apply for new energy vehicle license plates or continue using the original regular license plates. 2. If the original regular license plate is lost or damaged, the public security traffic management department will replace it with a special new energy vehicle license plate. For those who choose to continue using regular license plates, the public security traffic management department will implement differentiated management through the information system, which will not affect the owner's eligibility for preferential traffic management policies for new energy vehicles.

10

1

Share

What items should be prepared for summer driving practice?

Prepare a bottle of water for summer driving practice. You sweat a lot during summer driving practice. Pay attention to proper hydration. Preparation for driving practice: Daily necessities you usually carry; Depending on your height, you can prepare a cushion in case the chair is too low to see the reference points; Don't be overly nervous. Driving practice tips: Pre-driving inspection: Walk counterclockwise around the car from the left front corner, observe the body condition, tire pressure, tire tightness, and check for any leaks under the car body. Open the door, step in with your right foot first, sit down and then bring in your left foot, close the door properly, adjust the seat. The front-rear distance of the seat should allow your left leg to slightly bend when the clutch pedal is fully depressed. The backrest angle should be adjusted according to arm length, meaning your wrist should rest on the top edge of the steering wheel. Fasten the seat belt and adjust the three rearview mirrors.

3

1

Share

Is it necessary to settle traffic violations when renewing a driver's license?

Renewing a driver's license requires settling traffic violations. The renewal and inspection must meet the following conditions: Holders of large passenger vehicle, tractor, city bus, medium-sized passenger vehicle, or large truck driver's licenses must have no demerit points in the current scoring cycle, or holders of other types of driver's licenses must have fewer than 12 demerit points in the current scoring cycle; Holders of large passenger vehicle, tractor, city bus, medium-sized passenger vehicle, or large truck driver's licenses who have demerit points in a scoring cycle, as well as holders of other types of driver's licenses who have been involved in a traffic accident resulting in death and assumed equal or greater responsibility without having their driver's license revoked, must have completed the required inspection education; The applicant must have no outstanding road traffic safety violations or traffic accidents; The applicant's physical condition must meet the requirements for driving; The driver's license must not be under circumstances such as being legally seized, detained, suspended, revoked, canceled, or annulled.

15

0

Share

What Causes the Tingling Sensation When Pressing the Accelerator?

A tingling sensation when pressing the accelerator is a typical symptom of cylinder misfire. If the car experiences jerking, delayed acceleration response, or noticeable vibrations while driving, these are classic signs of cylinder misfire. When one of the four cylinders stops working, the remaining three create an imbalance in power output, leading to noticeable shaking and sluggish acceleration. Below are the troubleshooting steps: First, use a diagnostic tool to check for misfire fault codes or identify which cylinder is not functioning. Once the faulty cylinder is identified, inspect the ignition coil for spark intensity, check if the spark plug insulation is damaged, and verify the fuel injector's signal and fuel delivery. Swapping components between cylinders can help isolate the issue. If no issues are found above, test the cylinder compression. Even low-compression engines should not drop below 9 bars, while high-compression engines may require 15-16 bars. If all checks are normal, revisit the basics: scan for fault codes, inspect timing for excessive retardation, and verify sensor signals for accuracy.

13

1

Share

How to reset the maintenance light on the Borgward BX5?

What Causes Increased Fuel Consumption After an Oil Change?

What is WEX car?

Are New Energy Vehicles Only Eligible for Green License Plates?

What items should be prepared for summer driving practice?

Is it necessary to settle traffic violations when renewing a driver's license?

What Causes the Tingling Sensation When Pressing the Accelerator?

Does the 6th Year Vehicle Inspection Require a Physical Test?

How Does an Oxygen Sensor Work?

What is the reason for the cancellation of the small car lottery application result?

How to Remove Anti-Theft Wheel Bolts?