How to Reset the Maintenance Light on the 2021 Haval H6?

2 Answers
McElisa
07/25/25 4:30pm
The method to reset the maintenance light on the 2021 Haval H6 is as follows: 1. Insert the key; 2. Turn the key to the 'ON' position, then press and hold the odometer button on the dashboard for more than 15 seconds without releasing it while the engine is idling; 3. Simultaneously press the brake and accelerator pedals and wait for the maintenance light to flash; 4. Release both the brake and accelerator pedals. Taking the 2021 Haval H6 as an example, it is a compact SUV with body dimensions of 4615mm in length, 1860mm in width, and 1720mm in height, a wheelbase of 2680mm, a fuel tank capacity of 58 liters, and a curb weight of 1675kg. The 2021 Haval H6 features a front MacPherson independent suspension and a rear double-wishbone independent suspension. It is equipped with a 1.5L turbocharged engine, delivering a maximum horsepower of 150PS, a maximum power of 110kW, and a maximum torque of 210Nm, paired with a 6-speed manual transmission.
Was this review help?
17
4
Share
CarmenDella
08/11/25 9:51pm
I just reset the maintenance light on my 2021 Haval H6, and found the process quite simple. After parking the car, sit in the driver's seat and turn the key to the ON position without starting the engine; at this point, the dashboard will display normally. Locate the TRIP button or a similar function key on the dashboard, press and hold it for about 5 seconds, and the maintenance menu will pop up on the screen. Then use the button to scroll up and down to select the 'Maintenance Reset' option, and press the confirm key; the whole process takes less than a minute. I’ve tried it a few times, and it works well; if it doesn’t respond the first time, check if the key is in the correct position—sometimes you need to try again. It’s recommended to check the user manual before operating, as buttons may vary slightly between different models. Doing it yourself saves a trip to the 4S shop and helps you get familiar with the car’s operations, which feels quite rewarding. In short, after resetting, the maintenance reminder disappears, making driving more reassuring.
Was this review help?
10
2
Share
Expand All
More Forum Discussions

Does the RX5 have headlight cleaning function?

RX5 does not have a headlight cleaning function, as the entire series of this vehicle is not equipped with devices for cleaning headlights. Headlight cleaning refers to a water outlet located below the headlights, which can be used to clean dust and dirt from the headlights at any time. During nighttime or low-light driving, rain and dust can severely affect the driver's visibility, and the headlight cleaning device provides a simple and effective solution to this problem. The RX5 is an internet SUV under SAIC Roewe, with dimensions of 4545mm in length, 1855mm in width, and 1690mm in height, and a wheelbase of 2700mm. The vehicle's Internet Car Intelligent System 2.0 allows the car and passengers to operate some in-car functions via voice commands, including the sunroof, navigation, air conditioning, etc.
14
5
Share

What is the ground clearance of the Buick Verano?

The ground clearance of the Buick Verano is approximately 13cm, which is relatively low among vehicles. Therefore, drivers should try to avoid rough roads to prevent damage to the vehicle. The car chassis consists of four parts: the transmission system, the running system, the steering system, and the braking system. The function of the chassis is to support and install the car engine and its various components and assemblies, forming the overall shape of the car, receiving the power from the engine to make the car move and ensuring normal driving. The Buick Verano is equipped with a 1.0T turbocharged engine based on a small engine architecture, with a maximum power of 85kw and a maximum torque of 170nm.
13
5
Share

What are the correct steps to start and park an automatic transmission car?

The correct steps to start and park an automatic transmission car are as follows: Starting: 1. After sitting in the driver's seat, do not press the brake pedal, simply press the start button once. At this point, the ACC light will turn on, and the vehicle will perform a self-check. Note: If it is a mechanical key ignition, turn the ignition key to the second position, to the ACC (accessory) position, allowing the car's computer system to begin the self-check for at least 6 seconds or more. 2. Ensure the handbrake is engaged and the gear is in P (Park) or Neutral. Press the brake pedal and press the start button again to ignite and start the engine. Note: For mechanical keys, directly turn the ignition key to the ON position to start the engine. 3. Release the foot brake. You may choose to warm up the car for 1-3 minutes; specifically, check the coolant temperature gauge on the dashboard. When the needle reaches 90 degrees, it indicates the car is sufficiently warmed up. 4. Press the foot brake again, shift to D (Drive), and release the handbrake (for electronic handbrakes, simply press the button briefly). 5. Observe road conditions, watch for approaching vehicles from behind and pedestrians on the side. You may turn on the turn signal when starting, slowly release the foot brake, gently press the accelerator, and complete the starting process. Parking: 1. Release the accelerator and press the brake pedal to bring the vehicle to a smooth stop. 2. Shift the gear from D to N (Neutral). 3. Engage the handbrake (for electronic handbrakes, pull up the button). 4. Release the foot brake but do not turn off the power (this is to confirm the car is completely stationary under the handbrake's effect, preventing the P gear from locking). 5. Continue pressing the foot brake and shift the gear from N to P (Park). 6. Release the foot brake, press the start button to turn off the power, and the parking process is complete. Note: For mechanical keys, simply turn the key back to the OFF position, turn off the power, and remove the key.
2
5
Share

What does the ECON mode in a car mean?

The ECON mode in a car stands for low-carbon and eco-friendly driving mode. This button can turn the energy-saving mode on or off. Modern cars generally offer three driving modes to choose from: Eco mode, Comfort mode, and Sport mode. Below is information about these three modes: Eco mode: When the car is in this mode, fuel consumption is relatively low. The throttle pedal sensitivity decreases, and the transmission shifts up more aggressively. Comfort mode: This mode is considered a normal operating mode for the car. In this mode, the throttle pedal response is more sensitive compared to Eco mode. Sport mode: Sport mode can be used during aggressive driving. When activated, the throttle pedal becomes highly responsive, and the transmission delays shifting. The transmission only upshifts when the engine reaches the redline. In Sport mode, the engine speed is maintained around 3,000 RPM, ensuring better power response during acceleration. Activating ECON mode helps reduce fuel consumption and save energy, but it may weaken the car's power. ECON can be understood as an abbreviation for "economy." It is generally recommended to keep ECON mode on in most situations, except when high torque output is needed (e.g., climbing hills) or when driving at very high speeds, where ECON mode should be turned off. After pressing the ECON button, the car enters a low-carbon, eco-friendly driving mode. The ECU, engine, and transmission then operate in the most fuel-efficient way to intelligently execute the driver's intentions, achieving optimal fuel economy through quick upshifts and smooth acceleration. When the driver presses the throttle pedal hard, the ECON system effectively controls the opening and closing of the intake valves to ensure stable engine operation and energy savings. Although ECON mode is simple and effective, it may not work under certain conditions: When the vehicle speed exceeds 120 km/h, priority is given to speed, and the energy-saving mode automatically deactivates. This means that if the car exceeds the economical speed range (usually between 60-90 km/h), ECON mode will not save fuel. The key to ECON mode is its reliance on the car's computer for independent operation while driving. Therefore, it does not function during idle stops or when the car is in N, P, or manual mode.
14
1
Share

How to Solve the Problem of Loud Noise During Cold Start?

First, warm up the engine to ensure all components are fully lubricated before driving, which can effectively prevent wear and tear on engine parts. Alternatively, wait for a few minutes after starting the engine. The noise will subside as the engine returns to normal operation.
5
5
Share

How to Use the Wipers on an Old Santana?

The wiper control for the old Santana is located below the right side of the steering wheel. Push the right lever downward for intermittent front wiper action, upward for continuous front wiper action, forward for front wiper action plus windshield washer fluid, and backward for rear wiper action plus washer fluid.
6
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.