How to Reset the Maintenance Light on the 2021 Geely Emgrand?

[ONevaeh]

Turn on the ignition switch, then turn it off. Simultaneously press and hold the two arrow buttons, then turn on the ignition switch. Access the maintenance menu, and after about 3 seconds, release the two arrow buttons. The maintenance menu will appear, asking if you want to reset. Press and hold the SET button for more than 3 seconds. Press the MODE button. Turn off the ignition switch, and the maintenance reminder will be cleared.

[VonJackson]

As an enthusiast who frequently researches automotive electronic devices, resetting the maintenance light on the 2021 Geely Emgrand is actually quite simple, with the key lying in the instrument cluster operation. First, don't start the engine—just turn the ignition switch to the ON position (where the car has power but the engine isn't running). Then locate the instrument cluster button near the steering wheel, usually the small TRIP button, and press and hold it for about 10 seconds. You'll see the maintenance light icon start flashing—release the button immediately once it does. The whole process is just these few steps and quite convenient. However, be sure the vehicle is stationary during operation to avoid distraction. If there's no response, it might be due to poor button contact or a minor system glitch—don't force it; try repeating the steps or check the manual. Resetting the maintenance light won't affect driving safety; it just reminds you when maintenance is due, so timely resetting avoids false alarms. Personally, I recommend checking for system updates regularly—some software upgrades can even optimize reminder functions for smarter driving.

[LeKendra]

A friend of mine with an Emgrand just solved this issue, saying it was ridiculously simple. I remember doing the maintenance light reset myself once. The steps were: get in the car, insert the key and turn it to the ON position (where the dashboard lights up but the engine doesn't start). Then hold down the TRIP button on the instrument panel for about ten seconds until you see the light flash, then release. The whole process takes a minute or two, about as complicated as setting an alarm on your phone. Just a heads-up though: never attempt this while the engine is running—it's way too dangerous. Also, button locations might vary slightly by model year—on my 2021 model, it's on the right side of the steering wheel. If the light goes off after the procedure, that means the reset was successful. The maintenance light is just a service reminder during normal driving, and resetting it doesn't really affect anything, but developing the habit of addressing it promptly saves a lot of hassle. If it glitches, I usually just restart the vehicle or try again later—still way cheaper and faster than running to the dealership.

[DeValeria]

Resetting the 2021 Emgrand's maintenance light is a piece of cake. Just turn the ignition to ON without starting the engine, hold down the TRIP button without letting go, and wait a few seconds until the light flashes – done. This trick is perfect for lazy folks like me, quick and straightforward. After resetting, the screen might show the next maintenance interval, which is a nice little bonus. When driving normally, don't panic if the light comes on; it's just reminding you to change the oil or something. Resetting is simple and safe. If you really can't figure it out, just search car owner forums – plenty of tested guides to help you sort it out.