How to reset the maintenance light on the 2020 Lingpai?

What to Do About Severe Shock Absorber Noise in Skoda Octavia?

The causes of shock absorber noise include shock absorber oil leakage and aging of the shock absorber top mount thrust bearing. Below are the specific reasons for shock absorber noise: Shock absorber oil leakage: When the shock absorber leaks oil, the interior of the shock absorber cylinder cannot be effectively lubricated, resulting in significant friction noise during operation. Aging of the shock absorber top mount thrust bearing: The thrust bearing is located in the engine compartment. Open the hood and press down on the body to check if the noise is coming from the shock absorber top mount. If so, it is likely due to aging of the thrust bearing. If the shock absorber spring is deformed or broken, the only solution is to replace the entire shock absorber spring.

15

5

Share

Is Antifreeze Needed in Summer?

Antifreeze is necessary in summer. Engine coolant serves multiple functions including freeze protection, boiling prevention, and corrosion resistance, unaffected by seasons or regions. The reasons are as follows: 1. It provides anti-corrosion protection for cooling system components. 2. It prevents scale formation, avoiding reduced radiator efficiency. 3. It ensures the engine operates within normal temperature ranges. When using antifreeze, pay attention to the following aspects: 1. Try to use the same brand of antifreeze. 2. Most antifreeze products have a two-year validity period; confirm the product is within its validity period when adding. 3. When replacing, completely drain the old fluid, clean the cooling system thoroughly, then add new fluid. 4. Avoid diluting with water.

8

3

Share

Will glowing car emblems be penalized?

Glowing car emblems will be penalized. Here is detailed information about it: 1. Introduction 1: Unauthorized replacement of car emblems violates the relevant regulations of the "Motor Vehicle Management Regulations" and is an illegal act. 2. Introduction 2: If car owners replace the vehicle logo without authorization, making it inconsistent with the registered vehicle brand, it will be difficult for the public and traffic police to determine the true brand of the vehicle in case of a traffic accident, which will bring inconvenience to accident handling. 3. Introduction 3: If the inspection finds non-compliance with regulations, the traffic management department may detain the vehicle's driving license and order the vehicle owner to rectify within a specified period.

13

4

Share

Why does the car overheat at idle but run normally when driving?

Here are the solutions for the issue of the car overheating at idle but running normally when driving: 1. Visit a professional repair shop or 4S store: Clean the condenser, radiator, check the fan, and cooling system. 2. Proper flushing: When washing the car yourself, you can use a hose to flush appropriately, especially through the gaps around the car emblem where the condenser is located. Over time, it can accumulate dirt, dust, leaves, and other debris. 3. Turn on the internal circulation when using the air conditioning: This helps save costs, maintain a lower temperature inside the car, and avoid waste. 4. Use intermittent cooling: After the interior temperature has decreased, you can turn off the air conditioning and turn it back on after a while.

5

3

Share

What car is vids?

vids is the Toyota Vios, a family-oriented entry-level model specifically designed and developed by Toyota for the Asian market. Below is relevant information about the Toyota Vios: 1. Powertrain: The engine is a 1.5L with 110 horsepower. The transmission is a 5-speed manual. Maximum power reaches 81kw, with maximum torque of 138N*m. 2. Exterior: The length, width, and height are 4435mm*1700mm*1490mm respectively. The wheelbase is 2550mm, with both front and rear track widths at 1460mm, and a minimum ground clearance of 160mm.

11

4

Share

Does the CS75 have anti-collision beams?

Changan CS75 is equipped with front and rear anti-collision beams. These beams play a role in absorbing impact energy during collisions, with their performance being influenced by factors such as length, width, height dimensions, material selection, and manufacturing processes. The following points highlight the functions of automotive anti-collision beams: 1. During vehicle safety development, engineers control the deformation sequence of the vehicle structure in collisions. 2. To protect the lives of occupants, structures closer to the passenger compartment should deform later, while those farther away should deform earlier. 3. For the vehicle's own protection, the weakest parts are placed at the outermost edges of the frame. This helps protect the main body of the vehicle from damage in minor collisions and facilitates repair and replacement.

11

3

Share

How to reset the maintenance light on the 2020 Lingpai?

What to Do About Severe Shock Absorber Noise in Skoda Octavia?

Is Antifreeze Needed in Summer?

Will glowing car emblems be penalized?

Why does the car overheat at idle but run normally when driving?

What car is vids?

Does the CS75 have anti-collision beams?

How to engage the S gear in Audi Q5?

What does V-type engine mean?

Does the Honda Civic come with a sunroof?

What does 'aoff' mean in the Buick Excelle?