How to reset the maintenance light on the 2020 Geely Emgrand?
3 Answers
The method to reset the maintenance light on the 2020 Geely Emgrand is as follows: Turn off the ignition switch, press the left and right arrow buttons on the multifunction steering wheel, power on the vehicle while releasing the buttons, the maintenance menu will appear on the instrument panel, asking whether to reset the maintenance light, press the set button for more than three seconds, and then press the mode button once to complete the reset. Taking the Emgrand 2021 UP 1.5L manual comfort model as an example: its length, width, and height are 4632 mm, 1789 mm, and 1470 mm respectively, the wheelbase is 2650 mm, the fuel tank capacity is 50 liters, and the body structure is a 4-door 5-seater sedan.
My own 2020 Geely Emgrand often has the maintenance light reset issue, but it's quite simple to handle. First, sit in the driver's seat, make sure the key is turned to the ON position without starting the engine, then press and hold the TRIP button on the dashboard for about 5 to 10 seconds until the light goes off. If there's no response, try repeating the process a few times or restart the car. This light is just a reminder for maintenance, and after resetting, it will start counting mileage or time from zero. Don't rush to the dealership and spend money—they might charge you 100 or 200 yuan for this. I do this myself often—it saves money and is convenient. Remember to check if the button is responsive; the Emgrand's button is on the small dot to the left of the steering wheel. If unsure, download the official Geely app—it has detailed tutorial videos. During regular maintenance, pay attention to oil and filter changes, as resetting the light helps the system provide more accurate warnings. In short, it takes just a few minutes—a very practical trick.
Resetting the maintenance light on the 2020 Geely Emgrand is quite straightforward. Here's how: turn the key to the ACC or ON position without starting the engine, then press and hold the RESET button on the instrument cluster for about 5 to 15 seconds until the light blinks and disappears. Remember not to press the accelerator or brake pedal—safety first. This light is designed to remind you of regular maintenance, and resetting it clears the system to avoid annoying reminders. If you miss the button, try turning off all power and restarting. Doing it yourself can save unnecessary repair costs and is quicker than visiting a workshop. I also recommend regular checks on your car's condition, like oil and coolant levels, and resetting the light in sync ensures a more worry-free drive. The key point is the button's location below the steering wheel—practice a few times to get faster. Don’t worry about damaging the car; it’s a simple skill every experienced driver should know.
