How to Reset the Maintenance Light on Nissan Qashqai?

1 Answers
Sara
07/29/25 12:16pm
Nissan Qashqai maintenance light reset method is as follows: 1. Turn off the vehicle and press and hold the small button below the dashboard tachometer. 2. While keeping the button pressed, turn the car key to power on the vehicle. 3. Wait for 3-5 seconds, and the Nissan Qashqai maintenance light will reset. More information about the Nissan Qashqai is as follows: 1. The Qashqai, the first product from Nissan's European Design Center, gets its name from the nomadic tribes living in the desert areas of Iran, meaning "urban nomad," and is positioned between a compact SUV and a hatchback. 2. The Qashqai is equipped with Nissan's newly developed 1.2-liter turbocharged gasoline engine, with peak horsepower and torque outputs reaching 113bhp and 190Nm respectively.
Was this review help?
18
1
Share
More Forum Discussions

Where is the engine number located on the Santa Fe 2.7?

The engine number of the Santa Fe 2.7 is located at the lower left side of the engine block, typically consisting of a combination of 7 to 8 digits and letters. In addition to the above method, the engine number can also be found through the following 4 ways: The vehicle's driving license displays the engine number, usually located on the second-to-last line; The motor vehicle registration certificate records the engine number; The car purchase invoice includes the engine number; The vehicle purchase tax payment certificate states the engine number. It is important to note that the engine number is not the same as the engine model. The engine model refers to the specifications and size of the engine within the manufacturer's lineup, and engine models can be the same. The engine number, however, refers to the production serial number of the engine. Each engine can only have one unique engine number, and no two engines share the same number.
9
2
Share

How is the off-road performance of the BMW X2?

BMW X2 has good off-road performance. 25-degree side slope test: During the 25-degree side slope test, the BMW X2 maintained a stable posture with minimal suspension compression. The driver's seat provided excellent support, and the wheels demonstrated strong grip without any signs of slipping, outperforming many competitors in its class. More than sufficient for daily suburban driving: With an approach angle of 15.8 degrees and a departure angle of 24.1 degrees, it handles undulating roads with ease. The 171mm ground clearance makes it more than capable for suburban driving, though extreme off-road conditions should be avoided. Excellent water wading capability: In a 30cm deep water test, the water level barely reached the license plate when entering, and only covered the exhaust pipe during steady driving. The power output remained stable throughout, demonstrating excellent water wading performance.
7
1
Share

Can You Continue Driving After the Car Coolant Warning Light Comes On?

Coolant warning indicates insufficient car coolant or may signal an overheating radiator. In such cases, you should not continue driving. Proceeding could cause the engine temperature to rise further, potentially damaging the engine. To avoid unnecessary losses and ensure safety, it is advised not to continue driving. Insufficient Coolant: If the warning is due to low coolant levels and no coolant is available for immediate replenishment, you can add an appropriate amount of purified water—preferably soft water, also known as distilled water. Avoid using tap water or other hard water, and do not add too much, as this could alter the coolant's boiling point. Overheating: If the coolant warning is caused by an overheating engine, it is best to pull over safely. Do not turn off the engine; instead, let it idle with the hood open to allow cooling until the temperature warning light turns off.
20
3
Share

Can Temporary License Plates Be Used Across Provinces?

Temporary license plates can be used across provinces. There are two temporary license plates in total: one should be affixed to the lower left or right corner of the front windshield, and the other to the lower left corner of the rear windshield. Temporary motor vehicle license plates are paper plates issued to allow vehicles to be driven on the road temporarily, usually valid for no more than 30 days. Precautions for temporary license plates include: 1. They can only be driven within designated areas; 2. Materials need to be prepared for applying for temporary plates; 3. New vehicles must have temporary plates to be driven on the road; 4. The validity period of local temporary plates is 7 days. Temporary license plates serve as a temporary permit for vehicles to be driven on the road while waiting for the issuance of formal plates and have the same legal effect as formal license plates.
2
0
Share

What are the reasons for an automatic transmission not shifting up?

Automatic transmission not shifting up may be caused by improper adjustment of the throttle cable or throttle position sensor, leading to governor failure. Diagnosis and repair methods: Perform fault self-diagnosis on the electronically controlled automatic transmission; readjust the throttle cable or throttle position sensor according to standards; inspect the vehicle speed sensor and replace if damaged; check the gear position switch signal and adjust or replace if abnormal; measure governor oil pressure - if it remains at 0 or very low when vehicle speed increases, it indicates governor failure or severe leakage in the governor oil circuit. Maintenance methods: The addition of automatic transmission fluid (ATF) must be strictly controlled. The ATF level must be between the bottom of the planetary gears and above the control valve body. When the fluid level is too high, the planetary gears' agitation will cause the ATF to foam, potentially leading to oil leakage during driving. When the oil level is too low, the clutches and brakes are prone to slipping.
12
2
Share

What is the normal tire pressure for winter tires?

The tire pressure for winter tires should be around 2.6bar. There isn't a significant difference in tire pressure between winter tires and regular tires. Whether in summer or winter, the tire pressure remains the same as long as it's maintained within the normal range. According to the international GBT2978-2008 standard, the recommended tire pressures for different types of tires are as follows: Standard tires: 2.4-2.5bar; Reinforced tires: 2.8-2.9bar; Maximum pressure: should not exceed 3.5bar. Tire pressure reset method: First, turn on the ignition, then press and hold the tire pressure monitoring reset button until you hear a "beep" sound before releasing it. The tire pressure monitoring system will then store the current normal tire pressure data, automatically clear the previous data, and finally, the warning light on the dashboard will turn off, indicating the tire pressure reset is complete.
14
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.