How to reset the maintenance light on Leopaard CS10?

1 Answers
MacReid
07/25/25 12:23pm
First, press the wrench button with your right hand, and use your left hand to start the ignition (this part after the engine starts). Release the wrench button with your right hand, then press the minute adjustment button on the time setting knob. Remove your right hand from the time button. Restart the ignition or start the engine, and the maintenance reminder will disappear, completing the manual maintenance reset.
Was this review help?
10
4
Share
More Forum Discussions

How to Open the Front Hood of the Cavalier?

Cavalier's method to open the front hood: A two-step unlocking process is required. First, pull the unlocking device inside the engine compartment (located on the panel above the driver's left foot), then move to the front of the engine compartment, directly below the car emblem, and pull the unlocking lever to open the hood. The Cavalier is a compact sedan under SAIC-GM Chevrolet, with body dimensions of 4474mm in length, 1730mm in width, and 1471mm in height, and a wheelbase of 2600mm. In terms of appearance, the Cavalier adopts Chevrolet's family design language, incorporating the classic design elements of the Redline series, blending agile and dynamic lines with a powerful exterior for a fashionable and refined look. The front face continues Chevrolet's family-style design language, with the dual grille seamlessly connected to the crystal-cut three-dimensional headlights, creating a strong sense of unity.
2
2
Share

Can turning on the AC in a car provide heating?

Turning on the AC in a car cannot provide heating because the AC button controls the air conditioning compressor, which is used for cooling in the summer. The heating function in a car utilizes the internal heat cycle of the vehicle and does not require the air conditioning compressor to be activated. Therefore, to use the heater, you only need to adjust the air blower settings without turning on the AC switch. The heat for the car's heater comes from the engine's operational heat: after the engine's cooling system dissipates heat from the engine, a fan directs this heat into the cabin to provide warmth. When the heater is not in use, the fan stops, and the heat vents close, allowing the dissipated heat to be released into the atmosphere. Thus, the car's heating system recycles waste heat and does not consume additional fuel.
7
3
Share

What is the trunk capacity of the Borui GE?

The trunk capacity of the Borui GE is 312 liters, with dimensions of 76cm in depth, 110cm to 135cm in width, and 50cm in height. The trunk can be opened or closed either electrically or via remote control. To open the trunk, simply press the button inside the car or on the remote key, and the trunk will open automatically. To close the trunk, press the close button, and it will shut by itself. The Borui GE is a model under Geely, with body dimensions of 4986mm in length, 1861mm in width, and 1513mm in height, and a wheelbase of 2870mm. In terms of exterior design, the Borui GE adopts the water ripple design concept for the grille, incorporating a shark-mouth concave biomimetic design. On the side, the Borui GE features a fastback body design, with a waistline that extends from the front to the rear of the car.
20
4
Share

What Causes Hard Car Brakes?

The reasons for hard car brakes are: vacuum booster failure, severely worn brake pads, or insufficient brake fluid. If there is an issue with the brake system, it is essential to immediately visit a 4S shop for inspection and repair. It is relatively normal for the brake pedal to become hard because the brake vacuum assist system relies on the vacuum generated by the engine under normal operating conditions to provide braking assistance. During startup, the vacuum level decreases, directly affecting the braking assist force. The brake pedal is the pedal that restricts power, i.e., the pedal for the foot brake (service brake). The brake pedal is used for deceleration and stopping, and it is one of the five major operating components in car driving. Its usage frequency is very high, and how the driver controls it directly affects driving safety.
20
0
Share

What Happens When Car Air Conditioning Pressure is Too High?

High pressure in a car's air conditioning system can lead to reduced cooling efficiency, increased workload on the compressor causing it to overheat, and may result in the compressor not working or operating intermittently. Reasons for excessively high pressure in a car's air conditioning system include: 1. Incomplete evacuation during maintenance, leading to air trapped in the system and increased condenser pressure; 2. Use of inferior refrigerant; 3. Overcharging of refrigerant; 4. The condenser's electric fan fails to open properly or has insufficient airflow; 5. The condenser is blocked by foreign objects, preventing proper heat dissipation; 6. Slight blockage of the expansion valve. Car air conditioning refers to the air conditioning device installed in vehicles, capable of cooling, heating, ventilating, and purifying the air inside the cabin, providing a comfortable environment for passengers, reducing driver fatigue, and enhancing driving safety. The air conditioning system has become one of the indicators for assessing the completeness of a car's features.
19
5
Share

How to eliminate the wrench warning on the 10th generation Accord?

The method to eliminate the wrench warning on the 10th generation Accord: The appearance of a wrench on the dashboard is a maintenance reminder, indicating that the vehicle is approaching or has exceeded the maintenance mileage. It is recommended to visit a 4S dealership for maintenance as soon as possible to clear the warning. The Accord is a model under Honda, with body dimensions of 4893mm in length, 1862mm in width, and 1449mm in height, and a wheelbase of 2830mm. The 10th generation Accord is the model in the family equipped with comprehensive safety features. Except for the entry-level 230TURBO and 260TURBO models, all other models are equipped with the HondaSENSING safety system. In terms of appearance, the 10th generation Accord features a lower and wider body, a prominent front nose, and a coupe-like roofline, all of which deviate from the traditional design style of previous Accords.
11
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.