How to reset the maintenance light on Jetour X90?

2 Answers
ValerieRose
07/29/25 7:13am
Start the Chery Jetour X90 vehicle by pressing the start button, then check the Jetour X90 dashboard where a maintenance reminder will appear. Press the SET button on the Jetour X90 steering wheel. Then press the SEL button on the right side of the Jetour X90 steering wheel again. Press the cancel button on the Jetour X90 steering wheel to reset the Jetour X90 maintenance light.
Was this review help?
2
5
Share
MacEmmett
08/12/25 10:33am
When I first got my Jetour X90, I was also curious about how to reset the maintenance light. Later, I tried a simple method: first, park the car securely and engage the handbrake, then turn the key to the ON position (where the dashboard lights up but the engine doesn’t start). Next, locate the reset button or small knob on the dashboard, press and hold it for about 10 seconds until the maintenance light flashes twice and turns off. The first time I did it, I was a bit nervous, afraid of breaking something, but it turned out to be quite user-friendly. If you don’t reset it after maintenance, the light stays on and can be distracting while driving, and there’s a risk of misinterpreting it as another issue. Making it a habit to reset it after each maintenance helps keep track of the actual mileage and ensures timely reminders for the next service. The Jetour X90’s system is designed to be practical—it takes just a minute or two to complete, but make sure the battery has enough power and all doors are closed to avoid mid-process failures. Regularly resetting the maintenance light extends your car’s lifespan and saves you money and hassle.
Was this review help?
3
4
Share
Expand All
More Forum Discussions

Has the Toyota 86 Been Discontinued?

The Toyota 86 has not been discontinued. The Toyota 86 is equipped with a four-cylinder horizontally opposed naturally aspirated engine with the model code FA20. This engine delivers a maximum power of 147 kW and a peak torque of 205 Nm. It is paired with either a 6-speed manual transmission or a 6-speed automatic transmission with manual mode. The car features a front-engine, rear-wheel-drive layout, with a MacPherson strut independent front suspension and a multi-link independent rear suspension. The interior adopts an all-black color scheme, and the dashboard layout is simple and clean. Below the air conditioning controls is a display screen showing vehicle information, and beneath the screen are the gear selection buttons for the automatic transmission. Inside the gear lever, there is a mode switch button for adjusting the 6-speed manual driving mode.
17
3
Share

Why Does a Manual Transmission Car Shake Violently When Starting?

Manual transmission cars shake violently when starting for the following reasons: 1. Insufficient engine power: This is caused by loose connections between the transmission and the chassis, or uneven engagement between the clutch pressure plate and the clutch friction disc. If not addressed promptly, it may lead to increased carbon buildup in the engine, damage to the spark plugs, and accelerated aging of engine components. 2. Engine under prolonged abnormal load: Manual transmissions primarily transmit power through the clutch, with the clutch pressure plate being the main component responsible for kinetic energy transfer. Prolonged semi-engagement or the engine operating under abnormal load conditions can accelerate wear on the clutch pressure plate, reducing its service life. When the pressure plate wears to a certain extent, power engagement becomes less smooth, causing the car to shake and the engine speed to remain unstable.
11
4
Share

How to Use Buick Cruise Control?

Buick cruise control is used as follows: 1. Activate the cruise system by pressing the ON/OFF button; 2. Set the desired speed, then press the SET button to maintain the current speed. Taking the 2021 Buick LaCrosse as an example, it is a mid-size sedan with body dimensions of 5026mm in length, 1866mm in width, 1459mm in height, and a wheelbase of 2905mm, weighing 1535kg. The 2021 Buick LaCrosse features a MacPherson strut front suspension and a multi-link rear suspension. It is equipped with a 1.5T turbocharged engine delivering 169 horsepower, 250Nm of torque, and 124kW of power, paired with a 9-speed automatic transmission.
10
3
Share

What is the lifespan of Audi's wet dual-clutch transmission?

Audi's wet dual-clutch transmission has a lifespan of 20 years or 500,000 kilometers. The Audi A4 uses a wet dual-clutch transmission. This car is a B-segment vehicle with dimensions of 4818mm in length, 1843mm in width, and 1432mm in height, and a wheelbase of 2908mm. The car is equipped with two engine options: a 1.4T and a 2.0T. The 1.4T engine has a maximum output power of 110 kilowatts, a maximum torque of 250 Newton-meters, and a top speed of 205 km/h. The 2.0T engine has a maximum output power of 135 kilowatts, a maximum torque of 320 Newton-meters, and a top speed of 215 km/h.
15
1
Share

How to Steer the Wheel Correctly?

There are several techniques to learn for steering the wheel correctly. Here are the learning techniques for steering the wheel correctly: 1. Technique One: Imagine the steering wheel as a clock, with your left hand holding at the 9 o'clock position and your right hand at the 3 o'clock position. The four fingers should curl from the outside inward, while the thumb naturally extends straight. 2. Technique Two: When steering, avoid crossing your hands. Instead, alternate them. As your right hand is about to touch your left hand, quickly adjust the position of your left hand, and vice versa. 3. Technique Three: If you forget how many turns you've made on the steering wheel, gently press the accelerator to observe the wheel's direction and make adjustments accordingly.
2
3
Share

How to Solve the EPC Warning Light Issue?

EPC warning light solutions: 1. Use qualified fuel and clean the throttle body; 2. Remove carbon deposits from related parts; 3. Rewrite ECU-related data. EPC stands for Electronic Power Control, and the illumination of the warning light indicates a potential fault in the electronic throttle system, which may affect the normal operation of the vehicle. Reasons for the EPC warning light: 1. Intake system faults, such as leaks or blockages; 2. Dirty throttle body or excessive carbon deposits; 3. Use of substandard fuel; 4. Abnormal cylinder pressure or poor operating conditions; 5. Valve faults, sticking, or carbon deposits; 6. ECU faults; 7. Sporadic faults or false alarms.
7
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.