How to Reset the Maintenance Light on Jeep Renegade?
2 Answers
Jeep Renegade requires maintenance before the maintenance light reset operation can be performed. The SERVICE indicator on the Renegade's instrument display is the maintenance cycle indicator light. When the ignition switch is in the ON position, the SERVICE icon on the display will flash, and the indicator will disappear after starting the engine, indicating that the vehicle requires maintenance. The method to reset the maintenance light on Jeep Renegade is as follows: 1. Press the one-touch start button on the Renegade. 2. Within 10 seconds, slowly press and release the accelerator pedal, repeating this action three times. 3. Finally, press the one-touch start button again to turn off the engine. 4. When starting the Renegade again, if the dashboard displays 'Change-oil' or 'Oil-change-required,' it means the reset was unsuccessful, and the above steps need to be repeated.
I often handle this reset light during my regular car maintenance, and the method is quite simple: First, turn the ignition switch to the ON position without starting the engine, then press and hold the TRIP button on the dashboard for about 10 seconds until the maintenance light goes off before releasing. The buttons may vary slightly for different model years of the Renegade—some may require pressing the brake pedal or a combination of steering wheel buttons. Ensure the vehicle is stationary in Park (P) during the operation to avoid distracted driving risks. If unsuccessful, check the owner’s manual or visit a professional shop, as it might indicate a system fault. Timely resetting prevents false alarms and improves the accuracy of maintenance interval reminders. Developing a habit of regular checks enhances driving peace of mind—typically, a 5-minute DIY job saves money and is efficient.
