How to reset the maintenance light on JAC Shuailing T6 pickup truck?
4 Answers
JAC Shuailing T6 pickup truck's maintenance light can be reset and cleared using an automotive computer or manually. Below is relevant information about the maintenance light: 1. Introduction: The maintenance light is a reminder function set by the manufacturer to alert the vehicle owner to perform maintenance at certain mileage or time intervals. It appears in the form of an instrument panel or screen message or indicator light, reminding the owner to perform maintenance. 2. Types: There are three common types: a yellow oil can icon, a yellow small wrench icon, or direct text in Chinese stating 'Please change the oil soon.' 3. Function: The purpose of the maintenance light is to record the mileage of important components, much like a timer in a sprint race, serving to remind the vehicle owner and automotive maintenance personnel. If the owner replaces related parts without resetting the maintenance light, the corresponding vehicle maintenance light should be reset.
I've been driving the JAC Shuailing T6 pickup for a while now, and when the maintenance light comes on, I reset it myself. The method is simple: First, don't start the engine, turn the key to the ON position. After the dashboard completes its self-check, locate the small button called TRIP, hold it down for 5-10 seconds, and the light will disappear. If it doesn’t work the first time, try a few more times or disconnect the power and try again. Remember, once the light is off, go for maintenance immediately—don’t delay, or the engine will wear out faster and consume more fuel. I usually check the oil and filter every 5,000 km, and the truck runs smoothly, saving money and hassle. Be careful not to touch other buttons during the operation to avoid accidental settings.
As a vehicle owner, safety comes first when resetting the maintenance light. For the T6 pickup, turn the key to the ON position without starting the engine, then press and hold the TRIP button on the dashboard for a while to turn off the light. After completing the procedure, schedule maintenance promptly as the light reminds you to change oil or check brakes - ignoring it could lead to major hazards. I always record maintenance dates to avoid forgetting. If the light won't turn off, it might indicate an electrical issue - I recommend visiting a professional shop rather than forcing it and damaging the vehicle. Since pickups carry heavy loads, regular maintenance can extend the vehicle's lifespan by several years, saving both money and hassle.
I often help friends with car repairs, and resetting the maintenance light is quite common. For the T6 model, place the ignition switch in the ON position, hold down the TRIP button until the light goes off, usually just a few seconds. If there's no response, check if the instrument fuse is intact. After resetting, don't delay maintenance; prolonged delays can lead to expensive repairs due to carbon buildup or belt wear. It's recommended to check every six months to keep the car in good condition.
