How to reset the maintenance light on JAC Refine M5?
2 Answers
JAC Refine M5 maintenance light reset method: 1. Turn on the ignition switch, briefly press the right information display selector handle to set the information display screen to black screen; 2. Press and hold the left mileage button for more than 5 seconds until the oil lock display appears on the screen, then release the button, and the display area will show OIL for 2 seconds; 3. Release the button and immediately press it quickly 5 times within 3 seconds; 4. After OIL flashes 3 times and turns off, SUCESSFUL will be displayed. The JAC Refine M5 is powered by a 2.0T turbocharged engine with a maximum output of 177 horsepower and a peak torque of 260 Nm. In terms of the transmission system, it is paired with a 5-speed automatic transmission and adopts rear-wheel drive.
I think clearing the maintenance light on the JAC Refine M5 is a practical task. After years of driving, I've summarized the experience: first, turn off the engine and park the car, insert the key and turn it to the ON position (don't start the engine), then press and hold the reset button on the dashboard, usually a small wrench icon located next to the speedometer. Hold it for about 5 seconds until the light flashes or goes off before releasing. The whole process should be done within 10 seconds, and after restarting the car, the light will disappear. Remember, the maintenance light is there to remind you to change the oil or filter regularly. After clearing the light, it will start counting the mileage from zero to prevent missed maintenance. If you don't clear it, it keeps beeping, which can be distracting and dangerous while driving. I recommend doing this immediately after each maintenance, and also checking the oil level, so the car runs more safely.
