How to Reset the Maintenance Light on Hongqi H5
4 Answers
Hongqi H5 maintenance light reset method is as follows: 1. Under the menu interface of the central instrument display, use the short press button to select the driving information interface. 2. Navigate to the maintenance information interface, then press and hold the reset button for more than 2 seconds to reset the maintenance information. Below is some information about the maintenance light: 1. Modern vehicle computers have maintenance mileage reminders. If maintenance is not performed when the mileage is reached, the maintenance light will illuminate. After maintenance is completed, the service station will reset the maintenance light to begin recording the next driving mileage until the next maintenance interval is reached. 2. If you perform maintenance yourself instead of going to a service station, you can also reset the maintenance light by following the instructions in the manual.
I usually drive a Hongqi H5, and resetting the maintenance light is a piece of cake. Sit in the car without starting the engine, turn the key to the ON position, use the buttons on the right side of the steering wheel to bring up the dashboard menu, find 'Maintenance Settings,' select the reset option, and hold it for a few seconds. Once the light goes off, you're done. However, the menu layout might differ for H5 models from different years; post-2020 models might require operation via the central control screen—look for it in the vehicle settings. Ignoring the maintenance light can make you forget to change the oil, which isn't good for the engine. I always do this after every service; it's a habit that keeps the car running smoother. Remember, the manual or the 4S store's mini-program has detailed instructions—if you're unsure, check there instead of messing around.
As a car enthusiast, I have experience with resetting the maintenance light on the Hongqi H5. Start the car without igniting the engine, press the TRIP button on the dashboard to enter engineering mode, navigate to the maintenance reset option, and confirm execution. It usually takes about two minutes to complete. If you forget or the light comes back on, it might be due to improper saving of the settings, and you'll need to repeat the process. It's recommended to reset the light immediately after regular maintenance to ensure accurate reminders. If you're not familiar with the process, the Hongqi's OBD interface can be used with a scan tool for resetting, and visiting a professional shop can save you the hassle. A lit maintenance light can affect driving peace of mind, and ignoring it may lead to increased mechanical wear, so timely action is essential to protect your beloved car.
Resetting the maintenance light on the Hongqi H5 is not difficult, as owners who have driven this car for several years would know. Turn the ignition switch to the ACC position, then use the steering wheel buttons to navigate the menu and find the reset option. If the light doesn't come on, it might be due to incorrect settings; check the manual for the specific year model. Don't delay—the light serves as a reminder for maintenance, and ignoring it could harm the vehicle.
