How to Reset the Maintenance Light on Honda URV?

[StRhett]

Honda URV maintenance light reset method is as follows: 1. First, set the URV's power mode to ON mode and ensure the vehicle is in a complete stop state. 2. On the multi-information center display, press the HOME button. 3. Select Vehicle Settings, then find and reset the vehicle maintenance information to complete the process. Relevant information about the Honda URV is as follows: 1. In terms of safety features, the Honda URV is equipped with a Collision Mitigation Braking System, LKAS Lane Keeping Assist System, RDM Lane Departure Mitigation System, MVCS 360° Panoramic View Monitor, and CTM Cross Traffic Monitor. 2. In terms of exterior design, the URV adopts Honda's family-style appearance, featuring a smooth and rounded front grille and bumper design. The chrome-plated grille decoration adds depth to the front fascia. The blade-style headlights are paired with a diamond-cut lamp cluster, with the turn signals, fog lights, and daytime running lights all utilizing LED light sources. 3. In terms of powertrain, the new vehicle offers a choice between 1.5T and 2.0T turbocharged engines.

[LaGideon]

I just finished servicing my Honda URV, and resetting the maintenance light was quite simple. First, turn the car to the ON mode by pressing the start button twice without stepping on the brake, until you see all the dashboard lights on. Then, locate the TRIP button on the dashboard and press it repeatedly until the 'Maintenance' message appears. At this point, don't release it—keep holding the TRIP button for about 10 seconds. You'll see a flashing prompt; continue holding until the reset is complete. The whole process takes about half a minute. I did it myself the other day, and after success, the dashboard will display the next service mileage. A little tip: make sure all doors are closed before starting, or the process might get interrupted. Last time, my passenger door wasn't shut properly, and I had to do it again.

[LilaLynn]

Resetting the Honda URV maintenance light requires following key steps. First, power on the vehicle without starting the engine—this is a prerequisite. Then continuously press the TRIP button on the instrument panel while watching the screen for the maintenance reminder to appear. At this point, keep holding the TRIP button without releasing for about 10 seconds or more. When you see the prompt flashing, continue holding for a few more seconds to complete the reset. Be careful not to press the brake pedal during this process, as it will start the engine. I've encountered many friends who failed because they forgot this detail. Additionally, it's recommended to perform this operation in daylight with sufficient lighting to clearly observe display changes. Timely reset after each maintenance is particularly important; otherwise, the persistent warning light on the dashboard can be quite annoying.

[PiperDella]

Resetting the maintenance light for the URV involves three steps: After powering on, repeatedly press the TRIP button to bring up the maintenance menu, then hold the TRIP button for 10 seconds until it flashes, and finally hold it again to complete the reset. Essentially, this allows the vehicle's computer to restart the maintenance cycle calculation. Remember to keep the vehicle stationary during the operation. Many people worry about damaging the button, but there's no need to press too hard—just apply gentle and continuous pressure. After resetting, it's best to start the vehicle to check if the display is correct.