How to Reset the Maintenance Light on Honda Envix?
3 Answers
Honda Envix maintenance light reset method: 1. Press button A and step on the brake pedal, neither should be released midway; 2. Turn the ignition switch to 'on' without starting the car; 3. The dashboard characters will flash at this time; 4. Keep holding button A, and after a moment, an ellipsis will appear on the dashboard; 5. Release the brake pedal and button A; 6. Turn off the vehicle's power to complete the maintenance light reset. The Honda Envix has body dimensions of 4756mm in length, 180mm in width, and 1509mm in height, with a wheelbase of 2730mm. The smooth waistline runs through the entire side of the car, giving it a dynamic, diving appearance.
Seeing your Honda Envix maintenance light on, let me help you with the reset method. The reset is simple: Sit in the driver's seat, turn the key to the ON position (no need to start the engine), after the dashboard lights up, locate the DISP or TRIP button on the steering wheel, press it a few times to enter the menu, select the maintenance reset option, then hold the SELECT/RESET button for 5 to 10 seconds, and the light will go off. I often do this, but be careful not to press too hard for too long to avoid damaging the dashboard. The maintenance light usually reminds you to change the oil or check parts; after resetting, make sure to go to a professional shop for maintenance. Otherwise, long-term operation may cause engine wear and shorten its lifespan. I also make it a habit to reset it myself after each maintenance for convenience and peace of mind. Remember, steps may vary slightly for different model years, so checking the manual is always accurate.
Resetting the Honda Envix maintenance light is super easy, let me walk you through it step by step: First, get in the car, turn the key to the ON position (just make sure the dashboard lights up), then press the SETUP or INFO button on the left side of the dashboard to enter the menu. Scroll to the Oil Life option, and hold down the RESET button for about 10 seconds until the light disappears. Honestly, this is pretty basic, but beginners might find the menu a bit tricky to locate—just take a second look and you’ll get the hang of it. The maintenance light is triggered by the computer based on mileage or time, and it automatically reminds you when service is due. After resetting, it’s a good idea to check if the oil meets the required standards; otherwise, you might run into issues on the highway, which would be a hassle. Safety first when doing DIY work—don’t mess with other settings. I’ve always preferred resetting it myself—saves money and teaches you a thing or two about cars.
