How to Reset the Maintenance Light on Geely Vision X6?

1 Answers
Benjamin
07/30/25 12:53am
There are two methods to reset the maintenance light on the Geely Vision X6: a self-reset method and another method that involves using an automotive computer diagnostic tool to clear it. Below are the steps for resetting the maintenance light on the Geely Vision X6: 1. Self-reset: Press and hold the mute button on the right side of the steering wheel, then a prompt to press MODE will appear to activate the menu. Press MODE to enter and follow the on-screen instructions. 2. Using an automotive computer diagnostic tool: Connect a diagnostic computer or directly set it up in the vehicle. After maintenance, manually cancel the prompt to reset it to the next cycle.
Was this review help?
13
3
Share
More Forum Discussions

How to Adjust the Subframe Back to Its Original Position?

There is a gap in the bolt holes of the subframe, allowing movement without bolts, which can cause the wheelbase on both sides to be misaligned. After adjusting the toe-in to prevent deviation, slightly adjust the subframe to align the wheelbase on both sides. If the subframe is not in the correct position, it can cause jerky driving.
13
3
Share

What are the differences between BMW X1 and BMW X2?

Both the BMW X2 and BMW X1 are built on BMW's UKL platform. Since these two SUV models share many similar structural frameworks, there aren't significant differences between them. Here are the relevant details: 1. Exterior: The BMW X2 and X1 are products of the same platform, with similar dimensions and design layouts, but differing in stylistic details. The X2 appears wider and flatter, with a more sporty style, while the X1 is taller and longer, focusing on interior space. 2. Dimensions: In terms of body size, the BMW X2 has an advantage in width compared to the X1, but is smaller in other aspects. The difference in style is also evident from the rear design comparison. Although both use the same powertrain, the X2 features larger exhaust outlets for a more sporty look, while the X1 has a lower tailgate opening, emphasizing practicality for family use, making it more convenient for loading and unloading goods.
15
0
Share

How to Check if a Company Vehicle Has Passed the Annual Inspection?

Directly visit the vehicle management office to check the annual inspection status of the vehicle. You need to bring the vehicle registration certificate and ID card, and you can inquire directly at the service hall. You can also check through the Traffic Management 12123 app, where the annual inspection status of the vehicle can be viewed. For vehicles that have passed the annual inspection, the status will be updated synchronously in the Traffic Management 12123 app.
5
2
Share

How to Use the Active Noise Cancellation Feature in the Buick LaCrosse?

The LaCrosse is equipped with several microphones on the roof, which continuously collect noise signals and engine information. When noise is detected, the car's amplifier sends commands to the speakers to emit sound waves that are opposite to those inside the car, thereby canceling out the noise waves.
18
1
Share

How to steer when the car body drifts to the right while reversing?

When the rear of the car drifts to the right while reversing, you should steer the wheel to the left. A rightward drift indicates excessive right steering, so the steering wheel should be adjusted promptly. When correcting, if the rear of the car drifts to one side, steer the wheel in the opposite direction (steer as much as it drifts).
17
1
Share

How to Replace the Key Battery for Cadillac ATS-L

Press the side button near the bottom of the remote key and pull out the key. Insert a flat tool into the center of the remote key's bottom to separate the two halves of the remote key. Do not use metal objects. Insert the new battery into the battery slot, paying attention to the positive and negative poles. Reinstall a CR2032 or equivalent battery.
7
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.