How to reset the maintenance light on Geely S1?
2 Answers
To reset the maintenance light on the Geely S1, follow these steps: 1. Turn off the ignition switch; 2. Press and hold both arrow buttons simultaneously, then turn on the ignition switch; 3. After the ignition switch has been on for about 3 seconds, release both arrow buttons; 4. The display will then show the maintenance menu, asking if you want to reset; 5. Press and hold the SET (reset) button for more than 3 seconds; 6. Press the MODE button; 7. Turn off the ignition switch to complete the reset. Taking the 2019 Geely Vision S1 Upgrade 1.5L Manual Happiness Edition as an example: This car is manufactured by Geely Auto, classified as a compact SUV, with a gasoline energy type, a 5-speed manual transmission, and a 5-door, 5-seat SUV body type.
I just performed the maintenance light reset procedure on my Geely S1, and here are the detailed steps to share with you: First, turn the car key to the ON position without starting the engine; then locate the reset button on the right side of the dashboard, usually in the same place as the trip meter button, and press and hold it firmly; wait for about 5 to 10 seconds, and you'll see the small yellow light blink a few times or turn off directly, at which point you can release the button to complete the process. If there's no response, it might be due to insufficient battery power or a system misjudgment—try restarting the vehicle or checking the user manual. Last time I did this, I forgot to turn off the air conditioning, which delayed the process a bit, so I recommend turning off all electrical appliances in the car before proceeding. Additionally, after resetting, don't ignore regular maintenance reminders. Changing the engine oil and air filter on time can reduce engine wear, improve fuel efficiency, and make the car safer and more durable, giving you peace of mind on long drives.
