How to Reset the Maintenance Light on Geely Emgrand GS?

1 Answers
DaisyFitz
07/29/25 9:03pm
For the manual transmission Geely Emgrand GS, depending on the model year and instrument configuration, there are several methods to manually reset the maintenance light: 1. First Method (1) With the ignition switch turned off, press and hold the trip reset button; (2) Insert the car key and turn it to the position where the instrument lights up, then release the trip reset button and wait for the maintenance light to turn off. 2. Second Method (1) There is a button on the dashboard for adjusting the mileage. Press and hold this button for 2-3 seconds while the engine is idling; (2) Once the maintenance reminder turns off, the maintenance reset is complete. 3. Third Method (1) Turn off the ignition switch; (2) Press and hold both arrow buttons simultaneously, then turn on the ignition switch; (3) After the ignition switch is on for about 3 seconds, release both arrow buttons; (4) The display will then show the maintenance menu, asking if you want to reset; (5) Press and hold the SET (reset) button for more than 3 seconds; (6) Press the MODE button; (7) Turn off the ignition switch to complete the reset.
Was this review help?
4
2
Share
More Forum Discussions

Is Tire Repair Sealant Effective?

It is advisable to avoid using tire repair sealant whenever possible. This is because the sealant can cause damage to the tire. Tire sealant is a synthetic polymer compound that can chemically react with the inner rubber of the tire and the wheel hub, leading to corrosion of both the tire and the hub. Additionally, the sealant can affect the stability of the vehicle while driving, as tires require uniform mass distribution for optimal performance. The sealant, when injected into the tire, may only adhere to one side of the tire wall, disrupting the tire's balance. Below are specific considerations: 1. Large punctures cannot be repaired: In theory, tire sealant can only fill small air leaks with diameters not exceeding 5mm. It is ineffective for repairing cracks and cannot address extensive damage. 2. Sidewall punctures cannot be repaired: Sealant is only suitable for punctures on the tread area. Due to centrifugal force during injection and driving, the sealant can only fill the tread and cannot spread evenly on the sidewall, making sidewall punctures irreparable. 3. Not suitable for vehicles with tire pressure monitoring systems (TPMS): The sealant can damage the tire pressure monitoring sensors inside the tire. Any residue can also affect tire balance. 4. Use with caution in extremely low temperatures or high altitudes: Low temperatures can reduce the effectiveness of the sealant, and changes in atmospheric pressure at high altitudes can also impact its performance, so caution is advised.
17
1
Share

At what mileage does the Mazda6 Atenza start to have driving issues?

Mazda6 Atenza may develop minor issues around 20,000 kilometers. For example: 1. Side mirrors: The left side mirror may fail to fold. 2. CarPlay: USB1 CarPlay may fail to charge or function properly in low temperatures. 3. Air conditioning temperature: There might be unusual noises when adjusting the AC temperature, but the dealership confirmed it's covered under warranty. During the break-in period, pay attention to the following points: 1. Initial break-in period (0-500 km): Keep speed moderate, generally below 70-80 km/h, with engine RPM not exceeding 2,200. 2. Mid break-in period (500-1,000 km): Speed can be slightly increased to 90-100 km/h, keeping RPM below 2,500. Gradual acceleration helps engine break-in and allows detection of any abnormalities. 3. Final break-in period (1,000-1,500 km): Speed can reach up to 120 km/h. As break-in is a progressive process, increase demands gradually. Keep RPM below 3,000.
2
0
Share

What are the regulations for non-Beijing licensed vehicles driving in Beijing?

According to Article 90 of the Road Traffic Safety Law of the People's Republic of China and the Regulations on the Application and Use of Motor Vehicle Driving Licenses, vehicles with non-local license plates that violate traffic restrictions will be penalized with 3 demerit points and a fine. Additionally, non-local vehicles must comply with the management regulations that prohibit entry within the Fifth Ring Road and its main roads during weekday peak hours. Violations will also result in 3 demerit points and a fine. Below are some driving precautions: 1. Check the rearview mirrors: When turning or changing lanes, you must use the turn signal, slow down, and always check the rearview mirrors before turning. For left turns, mainly check the left rearview mirror; for right turns, mainly check the right rearview mirror; and for both left and right turns, check the interior rearview mirror. 2. Don't focus solely on the front of the car: When driving on clear roads, look straight ahead at about 100 meters, not just at the immediate front of the car. 3. Depress the clutch: Generally, when slowing down at speeds above 40 km/h, there's no need to depress the clutch first; wait until the speed drops to about 20 km/h before depressing the clutch. 4. Steering: Turn the steering wheel slowly at high speeds and quickly at low speeds.
14
5
Share

What Temperature Can a Car Withstand?

After the paint is cured, it can withstand temperatures around 200 degrees Celsius. Heat-resistant paint, also known as 'high-temperature paint,' refers to paint that can endure temperatures above 200°C (short-term resistance to 300-500°C or higher). It is formulated from heat-resistant resins (such as silicone, polytitanate, aromatic heterocyclic polymers, etc.), heat-resistant pigments (such as mica, iron oxide, graphite, etc.), and various fillers. Below are the characteristics of high-temperature resistant paint: 1. Insulation: The insulation of the new high-temperature resistant paint is reflected in its ability to effectively block heat transfer, continuously maintaining the inherent temperature and energy of the object, achieving applications for heat insulation, thermal insulation, cold insulation, and anti-freezing as needed for construction. 2. Environmental friendliness and harmlessness: The new high-temperature resistant paint has no odor and does not contain or produce harmful VOC components, carcinogenic substances, or other harmful polymers, decomposition products, or by-products. 3. Enhanced adhesion performance: The superior adhesion of the new high-temperature resistant paint is demonstrated by its ability to firmly adhere 100% to the surface of the object, completely bonding with the material. 4. Anti-expansion and contraction properties: The anti-expansion and contraction properties of the new high-temperature resistant paint are shown in its ability to prevent the substrate from expanding and contracting at different temperatures due to cold and heat, with strong tensile strength and elasticity.
17
2
Share

What is the fuel tank capacity of the 2015 Changan CS75?

The fuel tank capacity of the 2015 Changan CS75 is 58 liters. The CS75 is equipped with two engines: a 1.8T and a 1.5T. The 1.5T engine is powered by China's Blue Whale technology, featuring a 200bar in-cylinder direct injection system and enhanced pulse turbocharging technology. It delivers a maximum power of 131kW (178Ps) and a peak torque of 265Nm. Both engines are paired with a 6-speed automatic transmission. In comparison, the fuel tank capacity of the Song Pro in the same class is 63 liters, while the Dongfeng Venucia has a fuel tank capacity of 48L. During actual refueling, the amount of fuel may exceed the calibrated capacity. This is because the fuel tank capacity marked by the manufacturer is measured from the bottom of the tank to the safe limit. There is additional space from the safe limit to the tank opening, which is designed to accommodate fuel expansion due to temperature increases without causing overflow. If fuel is filled up to the tank opening during refueling, the actual amount of fuel may exceed the calibrated capacity. To check the remaining fuel level, drivers can observe the fuel gauge on the right side of the instrument panel, marked with E and F. When the needle is close to E, it indicates low fuel, while nearing F means the fuel level is sufficient.
1
4
Share

Can People Who Get Carsick While Practicing Driving Continue to Obtain a Driver's License?

People who experience carsickness can obtain a motor vehicle driver's license. However, there are specific circumstances under which one cannot apply for a motor vehicle driver's license: 1. Condition one: Suffering from organic heart disease, epilepsy, Meniere's disease, vertigo, hysteria, paralysis agitans, mental illness, dementia, or other neurological diseases that affect limb movement and hinder safe driving. 2. Condition two: Having used or injected narcotics within the past three years, or having been released from compulsory drug rehabilitation for less than three years, or being addicted to dependent psychotropic drugs and not yet having quit. 3. Condition three: Committing a crime by fleeing after causing a traffic accident. 4. Condition four: Committing a crime by causing a major traffic accident while driving under the influence of alcohol or while intoxicated. 5. Condition five: Having the motor vehicle driver's license revoked for less than five years due to driving under the influence of alcohol or while intoxicated, or driving a commercial motor vehicle after drinking. 6. Condition six: Having the motor vehicle driver's license revoked for less than ten years due to driving a commercial motor vehicle while intoxicated. 7. Condition seven: Having the motor vehicle driver's license revoked for less than two years due to other circumstances. 8. Condition eight: Having the driving permit revoked for less than three years. 9. Condition nine: Other circumstances stipulated by laws and administrative regulations.
3
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.