How to reset the maintenance light on Geely Emgrand GS?

1 Answers
SanParker
07/29/25 6:46pm
Geely Emgrand GS maintenance light reset method: You can go to a service station for maintenance, and the technician will use a computer to access the vehicle system settings after the maintenance is completed, and the maintenance reminder light will be reset. Alternatively, there is a button on the instrument panel for adjusting the mileage. Press and hold this button for 2 to 3 seconds in idle state to reset the maintenance light. The Geely Emgrand GS is a model under Geely Automobile, with a length, width, and height of 4440mm, 1833mm, and 1573mm respectively, a wheelbase of 4440mm, and a fuel tank capacity of 55 liters. In terms of configuration, this car comes standard with features such as electrically adjustable rearview mirrors, rearview mirror heating, daytime running lights, automatic headlights, multifunction steering wheel, automatic air conditioning, and parking sensors.
Was this review help?
8
4
Share
More Forum Discussions

How to Adjust the Rearview Camera?

Turn on the vehicle's ignition switch, shift into reverse gear, and then go to the rear of the vehicle where the rearview camera is installed. It is usually installed at the position of the license plate light on the trunk lid or below the rear bumper. If the camera's light is on, it indicates normal operation.
6
1
Share

How to choose between CLS300 and Audi A7L?

Audi S7 features four tailpipes with a 4.0T displacement. Audi A7 has two tailpipes with 2.8 and 3.0T displacements, and the interior comes with aluminum brushed and walnut wood trim. In terms of size, it is slightly larger than the non-lengthened C-class executive sedan but smaller than the D-class luxury sedan. The Mercedes-Benz CLS is equipped with two V6 engines: a 2.8L and a 3.0T, with maximum power outputs of 220 horsepower and 300 horsepower respectively.
15
5
Share

How to Connect Alpha Bluetooth?

First, enable the Bluetooth function on both your mobile phone and the car's Bluetooth device, and set the mobile phone's Bluetooth to 'visible to all' in the settings. Then, search for Bluetooth devices on your phone and select the one you find to connect. Enter the pairing code on the Toyota Alphard's display screen, click confirm, and the connection will be successful.
1
3
Share

How to Adjust the Rearview Mirror for Subject Three?

Adjust the left and right positions so that the left edge of the rearview mirror just cuts off the right ear of the image in the mirror. Place the distant horizon in the center, and adjust the left and right positions so that the car body occupies 1/4 of the mirror's surface area. The ground area should be larger, accounting for about 2/3 of the mirror's surface area. As for the left and right positions, you can also adjust them so that the car body occupies 1/4 of the mirror's area.
9
4
Share

What is the difference between a C2 driver's license and a C1 driver's license?

The differences between a C2 driver's license and a C1 driver's license are: 1. Different permitted vehicle types: The C2 license permits small and micro automatic passenger vehicles, as well as light and micro automatic cargo vehicles; the C1 license permits small and micro passenger vehicles, light and micro cargo vehicles, and light, small, and micro special-purpose vehicles. 2. Different test vehicles: The C2 test vehicle is an automatic transmission car; the C1 test vehicle is a manual transmission car. Driving an automatic vehicle with a C2 license does not require gear shifting and rarely results in stalling, making the operation process relatively simpler. After obtaining a C2 license, if you need to drive a manual transmission car, you must additionally obtain a C1 license.
4
0
Share

Can I drive with the ABS light on?

It is still possible to continue driving with the ABS light on. What does the ABS light mean: The ABS light being on indicates that the ABS system is not functioning, which does not significantly affect normal driving. However, it is important to note that when the ABS light is on, there is a risk of wheel lock-up during emergency braking. Therefore, while driving, pay attention to the braking force to prevent skidding and loss of control due to wheel lock-up. When not to drive with the ABS light on: If both the ABS warning light and the brake system warning light come on simultaneously while driving, you must stop driving immediately. Check the brake fluid level as soon as possible. If the level is low, seek professional repair immediately. If the fluid level is normal, it means only the ABS is malfunctioning, and you should drive cautiously and have it repaired.
5
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.