How to reset the maintenance light on Geely Boyue?

[DiAndres]

First, start the car. After the dashboard lights up, press the TRIP button on the left side of the control lever to activate the dashboard buttons. Use the volume button on the right side of the steering wheel to switch to the settings system, then press the "MODE" button to enter the settings system. Use the "left-right cycle" buttons on the steering wheel to find the maintenance mileage option, then press the "MODE" button to enter the maintenance mileage system. Use the "left-right cycle" buttons to select the "Reset Mileage" option, then press the "MODE" button to confirm.

[LeKaleb]

Last year I bought a Geely Boyue, and when the maintenance light came on, I was really anxious. Later, I cleared it myself. The method is to turn off the engine after the car is parked, hold down the TRIP button near the steering wheel, then turn the ignition switch to ON (without starting the car), and hold it for a few seconds until the light goes off. I remember the first time I tried, the light didn’t turn off immediately, and I realized the button wasn’t pressed firmly enough. After a few more tries, it worked. If that doesn’t work, there might be a menu option in the central control screen—go into the settings and reset it. This light indicates that it’s time to change the oil or perform other maintenance. Ignoring it could damage the engine, so after clearing it, it’s best to go to a maintenance shop for a check-up to ensure everything is fine. Always refer to the owner’s manual—steps may vary slightly for different model years, but manual operation is usually quick and hassle-free.

[WalterLee]

Clearing the maintenance light on a Geely Boyue is quite simple, and I always enjoy tinkering with my car. First, turn off the ignition key. Second, press and hold the ODO button on the dashboard. Third, turn the key to the ON position without starting the engine. Fourth, keep holding until the light disappears, which usually takes less than 10 seconds. I recommend checking the user manual or online videos beforehand, as the button locations might vary across different Boyue models to avoid confusion. After clearing the light, make sure it’s actually off—don’t just rely on a hunch. Also, the maintenance light comes on when the vehicle’s computer detects that the mileage has reached the service interval, reminding you to change the oil or filter. Don’t just clear the light and call it a day—get the actual maintenance done to prolong your car’s life. If you’re unsure, don’t force it; take it to a professional shop for a safe and cost-effective solution.

[StAllie]

To reset the Geely Boyue maintenance light, just follow these steps: Turn off the engine, press and hold the TRIP button on the dashboard, turn the key to ON without starting the engine, wait for the light to go off, then release. Done! It's quick to do it yourself, saving you a trip to the shop.

[LeAbigail]

Don't ignore the maintenance light on your Boyue. I've seen people delay clearing it, only to end up with minor engine issues later. The reset method is as above: turn off the ignition, press the instrument button, switch to ON position and wait for the light to go off. But this doesn't mean the problem is solved. The light indicates it's time to check the oil or components as per mileage. After resetting, it's advisable to schedule maintenance immediately. Prevention is better than repair - paying regular attention to your vehicle's condition can help avoid major overhaul troubles. Safety first: if the button doesn't respond, don't force it; consulting an official service point or dealer is wiser.