How to reset the maintenance light on Emgrand GS?

[HazelDella]

There are two methods to reset the maintenance light on Emgrand GS: 1. Press and hold the small trip reset button, insert the car key and turn it until the instrument panel lights up, then release the button to reset the maintenance light; 2. There is a button on the instrument panel used to adjust the mileage. With the car in idle state, press and hold this button for 2 to 3 seconds to reset the maintenance light. The Emgrand GS has body dimensions of 4440mm in length, 1833mm in width, and 1560mm in height, with a wheelbase of 2700mm. The Emgrand GS is available in two versions: Sport and Elegance, with 11 models in total featuring 1.3T and 1.8L engine displacements.

[VonVincent]

Oh, I've thought about resetting the Geely Emgrand GS maintenance light several times. First, turn off the engine and make sure the car is completely stationary. Then find the TRIP button or reset button near the steering wheel and hold it down. Turn the key to the ACC position, the dashboard lights up, and keep an eye on the maintenance light until it flashes for three to five seconds before releasing. If the light goes out, it's successful; if there's no response, you may need to try again or check the manual. Don't take it lightly—manually resetting can save you the hassle of going to the 4S shop. Remember to service every 5,000 kilometers to avoid premature engine wear and delays. Practice a few times, and you'll get the hang of it—it's not complicated.

[MacAdelyn]

I've personally tried resetting the maintenance reminder light several times. After turning off the engine, hold down the reset button on the instrument panel without releasing, insert the key and turn it to the ON position without starting the engine, then release the button when you see the light flash. Common pitfalls include forgetting to turn off the engine before starting the operation (rendering it ineffective), or struggling to locate the hidden button position (for Emgrand GS models, it's often located behind the left side of the steering wheel). Voltage instability can also affect success rates, so ensure the battery is fully charged before parking. After resetting, confirm the light is off before driving with peace of mind. Otherwise, delaying the reset might cause you to overlook actual maintenance needs, potentially increasing repair costs. Doing it yourself saves both hassle and effort.

[LeSerenity]

Resetting the Emgrand GS maintenance light is not difficult. I usually park and turn off the engine, then press and hold the TRIP button without releasing, turn the key to the ON position, wait for the indicator light to flash, and then release. If you can't find the button, refer to the manual to locate the steering wheel buttons. If it doesn't work the first time, try a couple more times, and it should succeed 80% of the time. Regularly resetting the light reminder ensures timely maintenance and oil changes, keeping the car running smoothly and avoiding major repairs, which is good for the car and hassle-free for the owner.