How to Reset the Maintenance Light on Changan Suzuki Alivio?

1 Answers
LeonardoAnn
07/29/25 2:47pm
Here are the steps to reset the maintenance light on Suzuki Alivio: 1. First, turn the ignition switch to ON mode. 2. Briefly press the indicator selection button on the right side of the instrument panel until the information display switches to the remaining range display. 3. While the remaining range is displayed, press and hold the indicator selection button for more than 5 seconds, and the display will show 'OIL' for 2 seconds. 4. Release the indicator selection button and quickly press it 5 times within 3 seconds. After blinking 3 times, the light will turn off. 5. You can also use a specialized computer diagnostic tool to perform the reset.
Was this review help?
15
1
Share
More Forum Discussions

How to set up automatic window closing when locking the car on Haval H6?

To set up automatic window closing when locking the car on Haval H6, follow these steps: turn off the ignition switch, ensure all doors are closed, and press and hold the lock button on the remote key. All windows will automatically close. Taking the 2021 Haval H6 third generation 2.0T automatic two-wheel drive Max as an example: it is a compact SUV launched by Great Wall Motors, with a length, width, and height of 4653mm, 1886mm, and 1730mm respectively, and a wheelbase of 2738mm. In terms of power, it is equipped with a 2.0T turbocharged engine, with a maximum power of 155kw and a maximum torque of 325nm, matched with a 7-speed dual-clutch transmission.
16
0
Share

Why does the engine speed suddenly increase when in neutral?

The reason for the sudden increase in engine speed when in neutral is: There may be an issue with the vehicle's throttle body. The throttle body has some connectors and sensors. If these connectors have poor contact or the sensors malfunction, it can cause the engine speed to suddenly increase when the vehicle is in neutral. For automatic transmission vehicles, it is not advisable to stay in neutral for extended periods while driving. This is because when the vehicle is coasting in neutral, the connection between the engine and the drive wheels is lost. The car moves forward by its own inertia, and in case of an emergency requiring braking, all braking force must be provided solely by the brakes, which can easily lead to accidents. When coasting with the gear engaged, the engine itself provides a certain amount of braking effect, and combined with the brakes, the vehicle's braking distance is shortened.
1
2
Share

What Causes the Buzzing Sound in Honda Civic?

The reasons for the buzzing sound in Honda Civic are: 1. Mismatched engine oil viscosity; 2. Insufficient lubrication of engine components; 3. Increased engine wear gaps; 4. Excessive carbon buildup in engine, throttle valve, and spark plugs; 5. Dirty air filter. Taking the Civic 2021 HATCHBACK 220TURBO manual transmission model as an example: It is a compact 5-door 5-seat hatchback equipped with a 6-speed manual transmission, with a top speed of 210 km/h. The dimensions of this car are 4517mm in length, 1799mm in width, 1434mm in height, with a wheelbase of 2700mm.
14
4
Share

What Are the Techniques for Starting a Car on a Slope?

Car slope starting techniques are: 1. Handbrake method - After stopping on the slope, keep the foot brake, press the clutch, pull the handbrake tight and then release the foot brake, rev the engine, slowly release the clutch, and release the handbrake to complete the slope start; 2. Semi-clutch method - While keeping the foot brake, slowly release the clutch until the car body shakes, then release the brake and press the accelerator; 3. Heel-toe method - Use the heel to press the brake and the toe to press the accelerator, rev the engine while slowly releasing the clutch with the left foot, and when the car body shows a tendency to move forward, lift the right heel off the brake and continue to accelerate while releasing the clutch. Reasons for stalling during slope starting: 1. Releasing the clutch too quickly at the start without matching the throttle; 2. During semi-clutch starting, failing to release the handbrake when reaching the semi-clutch point will cause the car to stall.
8
4
Share

How Many Kilometers Should a Car's Brake Pads Be Replaced?

Car brake pads need to be replaced after driving 40,000 to 50,000 kilometers. Below is relevant knowledge about brake pads: Introduction to Car Brake Pads: Brake pads, also known as brake linings, generally consist of a steel plate, an adhesive heat insulation layer, and a friction block. The steel plate is coated to prevent rust, and the coating process is monitored using an SMT-4 furnace temperature tracker to ensure quality by detecting the temperature distribution during coating. The heat insulation layer is made of non-heat-conductive materials to provide thermal insulation. Causes of Brake Pad Wear: Inferior materials and structures of brake discs or drums can lead to premature wear of brake pads. Long-term damage to the brake calipers in the braking system can cause the brakes to not release properly, resulting in prolonged dragging between the pads and discs (or drums) and excessive wear. The use of substandard materials in brake pads and an unreasonably low design density of the friction layer are also contributing factors to severe brake pad wear. Additionally, original brake pads with a small design area, long-term high-speed driving, frequent braking, overloading, and prolonged use under high temperatures are major causes of severe brake pad wear.
20
0
Share

What is the cause of the squeaking noise from the front passenger seat in the 10th-generation Accord?

The reason for the squeaking noise from the front passenger seat in the 10th-generation Accord may be loose seat screws. It is recommended to visit a repair shop to check if the seat screws are properly fastened. Car seats can be categorized by shape into split seats and bench seats, by function into fixed, removable, and adjustable seats, and by passenger capacity into single, double, and multi-passenger seats. Taking the 10th-generation Accord 2018 Hybrid 2.0L E-CVT Base Model National VI as an example, its dimensions are 4893mm in length, 1862mm in width, and 1449mm in height, with a wheelbase of 2830mm, a fuel tank capacity of 48.5 liters, a curb weight of 1548kg, and the body structure is a 4-door 5-seater sedan.
12
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.