How to reset the maintenance light on Changan Benben?
2 Answers
Methods to reset the maintenance light on Changan Benben: 1. With the engine turned off, press and hold the short-distance counter reset button below the tachometer; 2. Turn the ignition switch to the ON position, release the short-distance counter reset button, and the SERVIC indicator will appear on the display; 3. Pull out the minute button on the clock, turn it to the right, and the mileage will be displayed on the screen; 4. Turn off the engine to reset the reminder message; 5. Turn the ignition switch to the ON position, and the SERVICE indicator will disappear. If the maintenance light cannot be turned off manually, it is necessary to visit a repair facility to use professional diagnostic equipment to reset the maintenance light.
Resetting the maintenance light on the Changan Benben is actually quite simple. I often do it myself during minor car maintenance. The maintenance light usually comes on when it's time to change the oil. Ignoring it may increase engine wear and lead to more expensive repairs later. Here's how to do it: First, sit in the driver's seat without starting the engine, just turn the key to the ON position to power up the dashboard. Then press and hold both the ODO button and the start button on the dashboard for about 5 to 10 seconds until the maintenance light goes off before releasing. Buttons may vary slightly between different model years of the Benben, so check the manual for the correct buttons. Once successful, go get an oil change or maintenance done promptly—don't delay. If the light keeps coming back on, it might be a sensor issue, and you should take it to a shop for inspection. Regularly checking the oil every 5,000 km can prevent the light from coming on unnecessarily, keeping things safe and cost-effective.
