How to reset the maintenance light on BYD Tang?
3 Answers
Here are the steps to reset the oil maintenance reminder on BYD Tang: 1. First, locate the confirmation button on the right side of the multifunction steering wheel; 2. Then, the LCD screen will display menu items; 3. Use the up and down function selection keys on the right side of the multifunction steering wheel to press the confirmation button; 4. Select the maintenance time setting to complete the reset. Additional information: Cars generally using full synthetic oil have a longer replacement cycle compared to those using semi-synthetic oil and mineral oil. Engine oil lubricates the engine, reduces friction, assists in cooling, minimizes buffering, and extends the service life of engine components. Engine oils in the market are divided into synthetic oil and mineral oil, with synthetic oil further categorized into full synthetic oil and semi-synthetic oil.
When the maintenance light on my BYD Tang came on last time, I knew it was time to handle it myself. First, I parked the car in a safe place, turned off the engine, and switched the key to the ACC position. The dashboard screen then displayed some information. Next, I held down the reset button or the Trip button near the steering wheel for a few seconds without releasing it. After hearing a beep or seeing the maintenance light go off, I released the button—usually, that did the trick. The whole process took less than a minute and was quite simple. The key is to make it a habit; I do this every 5,000 kilometers to avoid frequent trips to the dealership. By the way, when the maintenance light comes on, it usually means it's time to change the oil or check the brakes. Paying attention to your car's condition can save a lot of trouble. Just remember to check the manual before doing anything yourself to avoid pressing the wrong button.
Having played with cars for so long, I'm quite familiar with such minor issues. The maintenance light design of the BYD Tang is quite smart. Resetting it essentially means resetting the counter to avoid false alarms. Steps: With the engine off, hold down the small button on the left side of the dashboard, turn the key to the ON position (don't start the engine), and hold for about 15 seconds until the light naturally goes off. Be careful not to press the wrong button or release it prematurely. Personally, I find this more convenient than a software update—it doesn't waste time. Another tip: if the light doesn’t disappear after maintenance, the vehicle’s system might need to scan for errors. I’ve encountered this situation and solved it using this method. In short, regular maintenance is good for the car—don’t just focus on driving and forget these details.
