How to reset the maintenance light on BYD Song?

What does it mean when the yellow exclamation light in the car comes on for a while and then disappears?

The reason why the yellow exclamation light in the car comes on for a while and then disappears may be an intermittent fault, most likely related to the oxygen sensor. Introduction: Automotive sensors are input devices for the car's computer system. Function: They convert various operating condition information (such as vehicle speed, temperature of various media, engine operating conditions, etc.) into electrical signals and transmit them to the computer to ensure the engine operates in the optimal state. Definition: When troubleshooting faults related to automotive sensors, in addition to checking the sensor itself, it is also necessary to inspect the wiring harness, connectors, and relevant circuits between the sensor and the electronic control unit.

18

1

Share

Is an automatic transmission fuel consumption of 8 liters per 100 km considered high?

An automatic transmission fuel consumption of 8 liters per 100 km is considered normal. Here are some relevant explanations: 1. Driving habits: Car fuel consumption varies slightly depending on each individual's driving habits and skills. Smooth driving habits result in lower fuel consumption, while aggressive driving behaviors such as frequent overtaking and high RPM operations will appropriately increase fuel consumption. 2. Summer air conditioning system check: Air conditioning malfunctions are a significant cause of high fuel consumption. Poor cooling performance will require higher fan speeds and lower temperature settings to achieve a cooling effect. 3. Frequent hard braking: Frequent hard braking is the main reason for persistently high car fuel consumption. While ensuring safe driving, make full use of the vehicle's inertia. 4. Small-displacement vehicles should not use air conditioning too aggressively: For vehicles exposed to direct sunlight, it is not advisable to turn on the air conditioning immediately after entering. First, open the windows and set the fan to a higher setting without turning on the air conditioning to expel the hot air inside the vehicle. After the vehicle has cooled down moderately, then turn on the air conditioning.

9

5

Share

What Material is Film-Coated Cowhide?

Film-coated cowhide is also known as cowhide split leather. Leather is categorized by layers: There are top-grain and split leathers, with split leather mostly distinguished by raw materials, such as cow split and pig split. Characteristics of cowhide split leather: The reverse side is the second layer of cowhide leather, coated with a layer of PU resin on the surface, hence it is also called film-coated cowhide. Features of cowhide split leather: Split leather is obtained by slicing thick leather with a splitting machine. The top layer is used for full-grain or corrected-grain leather, while the split layer undergoes a series of processes like coating or film application to become split leather. This gives the leather surface various colors and patterns. Before film coating, the leather retains advantages like breathability and flexibility. For split leather without surface film coating, the surface is usually sueded.

4

1

Share

How Many Turns to Full Lock the Steering Wheel to the Left?

Full lock of the steering wheel is one and a half turns (excluding special vehicles). Turning fully to the right means turning one and a half turns to the right, and turning fully to the left means turning one and a half turns to the left. Below is relevant information about car steering wheels: Definition: The wheel-shaped device used to control the direction of a car, which converts the force applied by the driver to the edge of the steering wheel into torque and transmits it to the steering shaft. Grip: If the steering wheel is viewed as a clock face, the correct hand position is to place the left hand between the 9 and 10 o'clock positions and the right hand between the 3 and 4 o'clock positions. In the event of a collision, this posture is more conducive to supporting the body. Material: The frame is generally made of zinc alloy or aluminum alloy. Some manufacturers are experimenting with cheaper and lighter magnesium alloys. The frame is produced by die-casting. A few manufacturers still use steel sheet metal for the frame, which has a complex structure.

12

3

Share

Is It Worth Repairing a Car After It's Completely Submerged in Water?

Generally, a car cannot be fully restored after being submerged in water. Classification of Flooded Cars: Flooded cars can be roughly divided into three categories based on the extent of water submersion. The first is when the water level reaches the wheels; such vehicles still have practical value after repairs. The other two categories are when the water level reaches the dashboard and when it reaches the roof. These two situations are considered severe flooding, with higher repair costs and greater potential risks even after repairs. Submerged While Stationary: If a vehicle is submerged while stationary, the engine is usually not damaged, and compensation can be claimed if the owner has purchased auto damage insurance. However, if the owner impulsively attempts to start the car and drive it out of the flooded area, causing engine damage, the insurance will not cover the cost even if the owner has purchased flood insurance.

16

5

Share

What are the advantages and disadvantages of a low car chassis?

Advantages: Lowering the car chassis can increase the downward pressure on the vehicle body, thereby improving grip performance. When the chassis is lower, it can provide aerodynamic downward pressure to the body at high speeds. According to Bernoulli's principle, a narrow channel increases the speed of airflow, and as the airflow speed increases, the air pressure decreases, creating a pressure difference between the upper and lower surfaces of the vehicle body. The pressure on the upper surface of the body will be greater than that on the lower surface. As a result, the air will push the vehicle body downward, increasing the pressure of the tires on the ground, thereby enhancing tire friction and improving the grip performance of the sports car. Disadvantages: When passing through areas with significant elevation changes, driving straight may cause the bottom of the car to scrape. Driving through deep water may lead to serious consequences such as water entering the engine.

19

0

Share

How to reset the maintenance light on BYD Song?

What does it mean when the yellow exclamation light in the car comes on for a while and then disappears?

Is an automatic transmission fuel consumption of 8 liters per 100 km considered high?

What Material is Film-Coated Cowhide?

How Many Turns to Full Lock the Steering Wheel to the Left?

Is It Worth Repairing a Car After It's Completely Submerged in Water?

What are the advantages and disadvantages of a low car chassis?

Is It Normal for Water to Drip from the Middle of the Car Undercarriage?

What to Use When Car Air Conditioning Breaks Down?

What Causes the Clicking Sound When Shifting into Reverse Gear?

What are the conditions for vehicle purchase tax refund?