How to Reset the Maintenance Light on Buick Encore?

[VonCali]

Buick Encore maintenance light reset method is as follows: 1. Press the MENU button on the control lever to select the vehicle information menu. 2. Rotate the adjustment wheel to select the oil life option. 3. Hold down the SET/CLR button to reset for a few seconds until the central display shows 100% oil life. Extended information: The Buick Encore is developed based on GM's small crossover platform, featuring a coupe-style design rare among SUVs and excellent dynamic performance as a compact SUV. On April 15, 2019, the new generation Buick Encore family made its global debut. The new vehicle is equipped with GM's eighth-generation Ecotec engine, paired with a 9-speed HYDRA-MATIC intelligent transmission and a new CVT continuously variable transmission, meeting China 6 emission standards.

[VanFelicity]

My Buick Encore had its maintenance done recently, and resetting the maintenance light by myself was actually not difficult. It mainly relies on a combination of buttons on the steering wheel: first, turn off the engine, then locate the confirmation button with a checkmark icon on the right side of the steering wheel. Use your left hand to hold it down continuously, while simultaneously turning the key to the ignition-on position with your right hand (where the dashboard lights up but the engine is not started). Keep an eye on the dashboard—usually after holding it for a few seconds, the oil maintenance light will start flashing. Hold it for about five more seconds until it completely turns off, then you can release. After resetting, remember to restart the engine to check—only when the light stays off is it considered successful. Note that button positions may vary slightly depending on the model year. For some models after 2018, you may need to reset it through the central control screen. It’s best to check the vehicle manual for the correct steps before operating.

[LaHope]

I've worked on many Buick vehicles, and resetting the Encore's maintenance light requires precise timing. First, ensure the vehicle is completely turned off. Press and hold the confirmation button on the right side of the steering wheel without releasing it. Then, turn the key to the ON position to power up the instrument panel. Continue holding the button for about 10 seconds, carefully observing the dashboard prompts. Only release the button when the maintenance count shows 100% or the warning light turns off. The entire operation does not require pressing the brake or starting the engine. A common mistake is releasing the button too early, causing the reset to fail. If unsuccessful after two attempts, check if the fuse has blown. Additionally, it's recommended to monitor the light status every 5,000 kilometers, as excessive resets can affect the accuracy of maintenance records.

[MacWillow]

Resetting the maintenance light on your Buick Encore is super easy by yourself. After turning off the car, press and hold the confirmation button on the right side of the steering wheel, then turn the key to the ignition position until all dashboard lights come on. Keep holding the button. After about six or seven seconds, the maintenance reminder light will go off. Release the button to complete the reset. The whole process takes less than thirty seconds, saving you much more time than going to the dealership. For base models without steering wheel buttons, try pressing and holding the small pin button on the right side of the instrument panel. After resetting, remember to drive a few kilometers for the system to update the data.

[Connor]

Pay attention to details when resetting the Encore maintenance light. The preferred method is using the physical buttons on the steering wheel: Press and hold the right confirmation button with the engine off, maintain pressure when turning the key to the ON position, and release only after the oil indicator on the dashboard disappears. If incorrect operation causes a fault code to appear on the screen, you can reset the system by disconnecting the negative battery terminal for five minutes. Older models may require step-by-step operation, first selecting the oil life option in the instrument menu and then confirming the reset. I prefer to perform the reset immediately after maintenance to avoid misjudging faults. When washing the car, check the button rebound force and contact oxidation, which can affect the reset success rate.

[Bell]

Last week, I just reset the maintenance light on my Encore. The method is to hold down the hook-shaped button on the right side of the steering wheel after turning off the engine, then turn the key to the ignition position (just until the dashboard backlight comes on) with the other hand, and keep pressing for about seven or eight seconds until the small yellow wrench icon disappears. During the operation, I noticed the plastic button was a bit stiff to rebound, so I recommend cleaning the dust around the button gaps first. If the light remains on after resetting and starting the car, it might be because the technician didn’t reset the computer records during the last maintenance, requiring professional equipment to clear it. For daily use, make sure not to exceed the oil change interval, and address maintenance items promptly when the light comes on for safety.