How to reset the maintenance light on Brilliance Zhonghua?

What is the 0-100 km/h acceleration time for the Volkswagen CC?

The Volkswagen CC comes with two engine options: 1.8T and 2.0T. According to official data, the 1.8T model accelerates from 0 to 100 km/h in 8.8 seconds, while the 2.0T model achieves this in 7.01 seconds. Factors affecting the 0-100 km/h acceleration time of a vehicle include: Torque: Torque, in simple terms, represents the force available. Greater torque means more force to propel the vehicle, resulting in faster acceleration. The Volkswagen CC 1.8T has a maximum power output of 160 horsepower and a peak torque of 250 N·m. The 2.0T version delivers a maximum power of 200 horsepower and a peak torque of 280 N·m. Transmission efficiency: The transmission acts as the medium for power delivery, inevitably involving power loss. Higher transmission efficiency leads to better acceleration performance. Generally, transmission efficiency ranks as follows: manual transmission > dry dual-clutch transmission > wet dual-clutch transmission > AT transmission > CVT transmission. The Volkswagen CC is equipped with a 7-speed dual-clutch transmission. Power-to-weight ratio: The relationship between horsepower and vehicle weight is known as the power-to-weight ratio (measured in Hp/T). A higher power-to-weight ratio results in faster acceleration. The Volkswagen CC 1.8T has a power-to-weight ratio of 103 Hp/T, while the 2.0T version boasts a ratio of 129 Hp/T.

13

4

Share

What are the steps to reset the tire pressure warning on an Audi A4?

Audi A4L tire pressure reset method: First, turn on the ignition, then press and hold the tire pressure monitoring reset button until you hear a "ding" sound before releasing it. The tire pressure monitoring system will then store the current normal tire pressure data, automatically clear the previous data, and finally, the warning light on the dashboard will turn off, indicating the tire pressure reset is complete. Solutions for insufficient tire pressure: If no damage is visible, simply inflate the tire to the normal pressure and reset the tire pressure system; If upon inspection the tire is found to be punctured, drive to a tire repair shop promptly to have it fixed, then reinflate; If the tire pressure warning reappears some time after inflation without any punctures, it might be due to air leakage caused by a deformed wheel rim. It is recommended to check the wheel rim and replace it if necessary. Hazards of low tire pressure: Increased friction coefficient with the road surface, leading to higher fuel consumption; Causes the steering wheel to feel heavy and may lead to unsafe driving conditions such as veering off course.

6

4

Share

What needs to be replaced for a car's 20,000-kilometer maintenance?

For a car's 20,000-kilometer maintenance, you need to replace the oil filter, air filter, cabin air filter, and engine oil. Car maintenance is actually quite simple—it involves replacing some wear-and-tear parts and fluids. The fluids in a car include transmission fluid, power steering fluid, coolant, and brake fluid. The wear-and-tear parts include belts, wipers, spark plugs, tires, brake pads, brake rotors, and the battery. Car maintenance refers to the regular preventive work of inspecting, cleaning, replenishing, lubricating, adjusting, or replacing certain parts of the car. The purpose is to keep the car clean, maintain normal technical conditions, eliminate potential hazards, prevent failures, slow down the deterioration process, and extend the service life.

9

5

Share

What Causes Brake Noise During Cold Start?

The reason for brake noise during cold start is: the sound produced by friction between the brake pads and brake discs, which is related to the material of the brake pads. If the hardness is too high or there are too many impurities, they can be removed and polished to ensure a flat contact surface, restoring normal operation and reducing wear on the brake discs. Timely maintenance and inspection ensure stable, comfortable, and safe driving. Braking tips: 1. When braking, release the brake before the vehicle comes to a complete stop. Continuously pressing the brake can cause a strong impact when the vehicle stops. Release the brake once before the vehicle stops completely, then gently press the brake until the vehicle stops. 2. When braking during a turn, pressing the brake while turning the steering wheel can cause the vehicle to lose balance. Before entering a turn, reduce the speed sufficiently by braking. Emergency braking on slippery curved roads can easily cause skidding. Reduce the transmission gear and use engine braking to slow down.

2

0

Share

How often should the coolant be replaced in an Axela?

The recommended replacement interval for the Axela's coolant is approximately 60,000 kilometers. To prevent excessive foaming which reduces the heat exchange efficiency between the coolant and engine components, ensure the product is within its validity period when adding it. Long-life coolants can remain effective for up to three years. If suspended particles, sediment, discoloration, or deterioration are observed in the coolant, it should be replaced promptly, and the system should be cleaned. How to replace the coolant: Before performing a complete coolant replacement, conduct a thorough inspection to check for any leaks or cracks in the pipes, with particular attention to the five-way hose. The coolant is distributed to different parts of the vehicle through this hose to perform its function. If there are any signs of coolant leakage in this area, replace the hose or resecure the connection as necessary. Drain the old coolant and then flush the fluid channels with clean water. Add clean water to the coolant reservoir and continue filling until water flows continuously through the engine cooling system. Start the engine and let it idle for 3 to 5 minutes to circulate the water. Initially, the water draining from the reservoir may appear slightly pinkish. Continue adding clean water until the outflow is clear. Remember to remove the heater hose and drain all water from the heater core. After draining for about an hour, add the new coolant through the radiator hose. Then, pour another container of coolant into the reservoir until it is nearly full. Run the engine for about 10 minutes. As some air is expelled from the cooling system, the fluid level will drop. Top up the coolant to the "MAX" mark on the reservoir.

8

3

Share

Which Tesla model has wing-like doors?

Tesla model with wing-like doors is the Model-X from Tesla, here is the relevant information: Introduction to Model-X: Model-X is a mid-to-large size pure electric SUV under Tesla. The dimensions of Tesla Model-X are 5037mm in length, 2070mm in width, and 1684mm in height, with a wheelbase of 2965mm. This model comes in two configurations: a Long Range version and a Performance version. Both the Long Range and Performance versions are dual-motor models. Model-X Powertrain: The front motor of the Long Range version has a maximum power of 202kW and a maximum torque of 404Nm, while the rear motor has a maximum power of 285kW and a maximum torque of 440Nm. The Performance version's front motor has a maximum power of 202kW and a maximum torque of 404Nm, and the rear motor has a maximum power of 375kW and a maximum torque of 650Nm.

5

3

Share

How to reset the maintenance light on Brilliance Zhonghua?

What is the 0-100 km/h acceleration time for the Volkswagen CC?

What are the steps to reset the tire pressure warning on an Audi A4?

What needs to be replaced for a car's 20,000-kilometer maintenance?

What Causes Brake Noise During Cold Start?

How often should the coolant be replaced in an Axela?

Which Tesla model has wing-like doors?

What to do if the Audi A6 key cannot long-press to raise or lower the windows?

What is the 0-100 km/h acceleration time of the BRZ?

What are the differences between Honda Avancier and Honda URV?

What transmission is equipped in the Envision 28T?