How to Reset the Maintenance Light on Borui?

What Causes the Clunking Sound When Releasing the Clutch in a Manual Transmission?

It may be caused by loose friction plates on the steel plates or impact noise between the release levers and the window holes. Extended information is as follows: 1. Metal impact sounds require immediate inspection: If the clutch makes a "click" or "clunk" metal impact sound when engaging or disengaging, especially more noticeable when starting with a heavy load, it should be inspected or replaced. 2. Collision sounds require immediate inspection: If a "clatter" impact sound is heard, this is due to loose friction plates on the steel plates or impact noise between the release levers and the window holes, and should be inspected promptly. 3. Sharp squealing sounds require immediate inspection: If a sharp squealing sound is heard just before the clutch engages, which disappears when the pedal is pressed and reappears when released, this is caused by broken steel plates of the driven disc or exposed rivet heads scraping against the pressure plate or flywheel, and should be inspected. 4. Jerking sounds require immediate inspection: If the clutch pedal is released very slowly and the vehicle jerks forward with a "thud" sound, this is due to sudden engagement of the driving and driven parts. The reasons come from two aspects: First, deformation of the driven disc or oil contamination on the friction lining causing abrupt clutch engagement leading to jerking; Second, stiffness in the linkage system causing the pressure plate to suddenly press against the driven disc, resulting in jerking.

20

4

Share

What is the ratio of 25:1 for gasoline and engine oil?

25:1 means mixing 25 parts of gasoline with 1 part of engine oil. Here are the details: 1. Engine oil: It is the lubricating oil for the engine, which can lubricate the engine, reduce friction, assist cooling, and minimize buffering. Engine oil consists of base oil and additives. The base oil is the main component of lubricating oil, determining its basic properties, while additives improve and compensate for the shortcomings of the base oil. Using lubricating oil can reduce wear on engine components and extend their service life. Engine oils in the market are divided into synthetic oil and mineral oil, with synthetic oil further categorized into full synthetic oil and semi-synthetic oil. Generally, the replacement cycle for full synthetic oil in cars is longer than that for semi-synthetic oil and mineral oil. Drivers can choose the type of oil based on their driving conditions. The ratio of engine oil to gasoline can also be adjusted according to needs. 2. Gasoline: It is a volatile and flammable liquid hydrocarbon mixture obtained from petroleum through distillation and cracking, used as fuel. It appears as a transparent liquid, is flammable, with a distillation range of 30°C to 220°C. Its main components are C5 to C12 aliphatic hydrocarbons and naphthenes, along with a certain amount of aromatic hydrocarbons. Gasoline has a high octane number, providing strong anti-knock combustion performance.

15

5

Share

What to Do When Unable to Exit the Highway?

In the event of being unable to exit the highway, you can seek assistance from the highway management department staff. Here are the relevant details: 1. Unable to exit due to blizzard: Affected by blizzards, multiple provinces and regions may close highways. Some drivers traveling on highways may not receive timely notifications, resulting in being stranded and unable to exit. In such cases, drivers can consult the highway management department on how to exit. 2. Unable to exit due to accident-related highway closure: Drivers can rest at service areas until the highway reopens. They may also call the national highway rescue hotline 12122 to consult with highway traffic management authorities or check the highway closure status via the China Highway Network.

15

0

Share

Worried About Failing the Driver's License Test? Here's What to Do

Practice diligently during training and maintain a calm mindset during the exam to overcome your fears. Below is detailed information about obtaining a driver's license: 1. Overview: The full name of a driver's license is a motor vehicle driving license, also known as a "driver's license." It is a certificate required by law for motor vehicle drivers. In China, driver's licenses are divided into 15 categories: A1, A2, A3, B1, B2, C1, C2, C3, C4, D, E, F, M, N, and P. 2. Importance: Driving a motor vehicle requires certain skills. Without these skills, driving recklessly can lead to traffic accidents. Generally, driving without a license is not allowed. Therefore, it is essential to practice extensively when preparing for the driver's license test. Before driving on the road, it is crucial to master the basic functions of the vehicle.

15

1

Share

What Are the Causes of Abnormal Noise in a Manual Transmission?

Manual transmission may produce abnormal noise due to excessive or insufficient gear meshing clearance, poor gear meshing, low or deteriorated transmission oil level. Below is a detailed introduction to the causes of abnormal noise in manual transmissions: 1. Excessive or insufficient gear meshing clearance: When the meshing clearance is too large, the driving gear impacts the driven gear during rotation, producing a knocking sound. This noise usually worsens as the transmission temperature increases. When the meshing clearance is too small, the abnormal noise is typically continuous, and the faster the vehicle speed, the more severe the noise becomes, often causing the transmission lubricant to overheat. 2. Poor gear meshing: The abnormal noise from the transmission may be caused by the collision of gear tooth surfaces. This noise is uneven, and the greater the throttle, the louder the noise becomes. In severe cases, vibrations in the transmission can be felt.

9

4

Share

How to Check the Production Date of a Car from the Glass?

There are three methods to check the production date of the car glass: 1. Numbers and dots format: The number represents the year, and the dots represent the month. Dots in front of the number indicate the first half of the year, and the month can be calculated by subtracting the number of dots from 7. Dots behind the number indicate the second half of the year, and the month can be calculated by subtracting the number of dots from 13. 2. Numbers with large and small dots format: The number represents the year, small dots represent the quarter, and large dots represent the corresponding month in the quarter. 3. First line with numbers and small dots, second line with large and small dots format: The number represents the year of glass production, small dots in the first line represent the month of that year, and the second line represents the corresponding days of the month, where large dots represent 10 days and small dots represent 1 day.

11

3

Share

How to Reset the Maintenance Light on Borui?

What Causes the Clunking Sound When Releasing the Clutch in a Manual Transmission?

What is the ratio of 25:1 for gasoline and engine oil?

What to Do When Unable to Exit the Highway?

Worried About Failing the Driver's License Test? Here's What to Do

What Are the Causes of Abnormal Noise in a Manual Transmission?

How to Check the Production Date of a Car from the Glass?

Does the fuel gauge not moving after refueling indicate no fuel was added?

Is Hualu Tire a legitimate manufacturer?

Should You Fill Up the Tank for the First Time?

How to Remove Points from a Driver's License?