How to reset the maintenance light on Borgward BX5?

[ODelilah]

The method to reset the maintenance light on Borgward BX5 is: Press and hold the scroll wheel on the right side of the steering wheel while the engine is off. The Borgward BX5 is a compact SUV with body dimensions of 4490mm in length, 1877mm in width, 1675mm in height, a wheelbase of 2685mm, and a fuel tank capacity of 60 liters. It is equipped with a 1.4T turbocharged engine, delivering a maximum power of 110kW at 5500rpm and a maximum torque of 250Nm between 1750 to 4000rpm.

[LaCaden]

I recently dealt with the maintenance light issue on the Borgward BX5, and it was quite a hassle. First, you need to start the vehicle to power up the dashboard, but remember not to press the brake when starting—just press the start button twice. Then, hold down the RESET button on the left side of the steering wheel for about 7 seconds (I counted), and the dashboard will pop up a prompt menu. You'll see a small wrench icon labeled 'Reset'—quickly press the button on the right side of the steering wheel to confirm. The whole process requires fast hands; if the power cuts off midway, you'll have to start over. By the way, last time a car owner didn't follow the steps correctly and ended up not clearing the maintenance light while accidentally triggering the tire pressure calibration, which was counterproductive. If you really can't manage it, it's safer to drive to the 4S店 and let them use their computer to reset it—after all, professional equipment ensures the most thorough fix.

[SanJuliet]

Actually, resetting the maintenance reminder light on the Borgward BX5 isn't that difficult—it all depends on whether you know the right procedure. The method I figured out through trial and error is: First, close all doors and fasten your seatbelt, then turn the ignition switch to the ON position without starting the engine. Quickly use your left hand to press and hold the small black stalk on the instrument panel (the trip reset button), while simultaneously using your right hand to swiftly press the start button to power on the vehicle. When the instrument panel screen suddenly dims and then lights up again, immediately release both buttons. You'll see the maintenance indicator flash three times before turning off. Remember to turn off the air conditioning and radio beforehand to minimize interference, as unstable voltage in the car can easily lead to failure. After completing the procedure, it's recommended to turn off the ignition and restart the car to check. Sometimes there might be a delay in the light disappearing, which is normal—it usually goes away after driving for a while.

[HeidiFitz]

The method to reset the maintenance light varies significantly across different car models. For owners of the Borgward BX5, the simplest method is as follows: First, ensure the car is cold and don't press the brake pedal. Press the start button twice to power on the vehicle. Then, press the brake pedal all the way down with your left foot while simultaneously holding down the 'OK' button on the left side of the steering wheel with your right hand for about 5 seconds. At this point, the dashboard will suddenly go black and reboot. Wait for the tachometer needle to complete a full rotation, and the reset is done. Note: It's crucial to turn off the audio and air conditioning before performing this operation. Once, I tried it with the AC on, and the entire central control screen froze, requiring a reset by disconnecting the negative terminal of the battery. Nowadays, most new car models allow manual resetting, making the use of a diagnostic computer unnecessarily complicated.