How to Reset the Maintenance Light on BMW X1?

What lights should be turned on during normal night driving?

During normal night driving, you must turn on the high beam and width indicator lights. When encountering oncoming traffic at night, you should switch to low beam and immediately turn the high beam back on after passing. Width indicator lights usually do not have a separate switch and are activated simultaneously with the low beam, meaning that turning on the low beam also turns on the width indicator lights. The low beam and high beam primarily serve for illumination. In special circumstances, such as overtaking on the highway at night, you can alternately switch between high and low beams to alert the vehicle in front, ensuring safe overtaking. The high beam, also known as the headlight, has a long illumination distance, high brightness, and concentrated light without dispersion. It is essential to turn on the high beam when driving at high speeds.

19

3

Share

Can passengers get on or off at traffic lights?

Passengers are not allowed to get on or off at traffic lights, as this constitutes a traffic violation. More information on traffic safety is as follows: 1. Traffic Violation Penalties - Article 93 of the "Road Traffic Safety Law": For violations of laws and regulations regarding the parking or temporary stopping of motor vehicles, the illegal act may be pointed out, and a verbal warning may be issued, ordering the immediate departure of the vehicle. 2. Article 63 of the "Regulations for the Implementation of the Road Traffic Safety Law of the People's Republic of China" states that when a motor vehicle is temporarily parked on the road, the following provisions shall be observed: (1) No parking is allowed in sections of the road with no-parking signs or markings, in sections with separation facilities between motor vehicle lanes and non-motor vehicle lanes or sidewalks, or in crosswalks and construction zones. (2) No parking is allowed at intersections, railway crossings, sharp curves, narrow roads less than 4 meters wide, bridges, steep slopes, tunnels, or within 50 meters of these locations. (3) No parking is allowed in front of bus stops, emergency stations, gas stations, fire hydrants, or fire stations, or within 30 meters of these locations, except for vehicles using these facilities. (4) Doors shall not be opened, and passengers shall not get on or off before the vehicle comes to a complete stop. Opening or closing doors shall not obstruct the passage of other vehicles or pedestrians. (5) When parking on the roadside, the vehicle shall be close to the right side of the road, and the driver shall not leave the vehicle. After passengers get on or off or items are loaded or unloaded, the vehicle shall depart immediately.

8

5

Share

What are the differences between position lights and daytime running lights?

The differences between position lights and daytime running lights: 1. Tail lights are different: Position lights have both rear tail lights and front position lights; Daytime running lights do not have rear tail lights. 2. Usage environments are different: Position lights are turned on in low visibility environments, such as in foggy weather, dusk, evening, dawn, haze, rainy days, and nighttime; Daytime running lights are turned on during the day. 3. The way to turn them on is different: Position lights have a separate switch; Daytime running lights automatically turn on when the position is 0, without a separate switch. Position lights, also known as clearance lights, refer to the lights installed at the highest points at the front and rear of the vehicle, somewhat similar to the anti-collision lights installed at the wingtips of an airplane. Daytime running lights refer to the lights installed on both sides of the front of the vehicle, used to alert vehicles and pedestrians ahead during the day. Daytime running lights are not lighting lamps but signal lights that indicate the position of the vehicle.

14

3

Share

Where is the Nissan Sunny's Cabin Air Filter Located?

Nissan Sunny's cabin air filter is installed above the left foot position of the front passenger seat. The white cover on the right side is the cabin air filter cover. Opening this cover will reveal the cabin air filter. Functions of the cabin air filter: 1. Ensures the filter fits tightly against the housing, preventing unfiltered air from entering the cabin; 2. Separates solid impurities such as dust, pollen, and grinding particles from the air; 3. Adsorbs moisture, soot, ozone, and odors from the air. In terms of exterior design, the new Nissan Sunny inherits the family-oriented design approach of the Nissan family, featuring a rounded and full front end; the body lines are smooth, giving the car a practical and moderately styled appearance without strong individuality. As for the interior, the Nissan Sunny's cabin is relatively simple, adopting a gray and white color scheme, creating an overall fresh and elegant feel.

20

4

Share

How to Adjust Rearview Mirrors Properly for Driving?

Method for adjusting rearview mirrors when driving: The standard for left and right rearview mirrors is to position the distant horizon in the middle of the mirror, with the car body occupying one-fourth of the mirror. The standard for the interior rearview mirror is to place the distant horizon in the middle of the mirror, allowing the driver to see their right ear. When the body of the following car has entered the danger zone to the left of the dotted line in the rearview mirror, it indicates that the following car is very close, almost within 5 meters, and turning should not be attempted at this time. When the left side of the following car is close to the boundary between the safe zone and the danger zone, extra caution is advised, but signaling and turning are still safe. If the following car is in the safe zone, positioned in the center of the rearview mirror, it means the distance between the following car and the driver's car is about 15 to 20 meters, and normal turning maneuvers can be performed. If the following car is in the safe zone, positioned to the right of the center in the rearview mirror, it indicates a greater distance between the following car and the driver's car, allowing normal turning operations.

1

0

Share

How to Lift Up the Wiper of Sylphy?

Sylphy wiper lifting steps: 1. Insert the key and power on without starting the engine; 2. Press the ACC switch; 3. Quickly push the wiper switch upward twice, and the wiper will automatically move to the middle of the windshield, allowing you to lift it up from the middle position. The engine model of Sylphy is HR16, which includes 1.6 and 1.8-liter CVVT engines. The HR16DE engine adopts multi-valve continuous variable CVTC technology, and the engine body is made using aviation lightweight aluminum alloy manufacturing technology, making the engine itself lightweight, durable, and excellent in heat dissipation. On the HR16DE engine, some racing engine design and manufacturing technologies are applied, and its power output is as high as 80KW.

3

Share

How to Reset the Maintenance Light on BMW X1?

What lights should be turned on during normal night driving?

Can passengers get on or off at traffic lights?

What are the differences between position lights and daytime running lights?

Where is the Nissan Sunny's Cabin Air Filter Located?

How to Adjust Rearview Mirrors Properly for Driving?

How to Lift Up the Wiper of Sylphy?

What are the techniques for disassembling tires with TPMS?

Can the license plate be transferred together with a used car?

Why is the truck suddenly emitting white smoke?

Can Daytime Running Lights Be Turned Off?