How to reset the maintenance light on Besturn X80?
4 Answers
Besturn X80 maintenance light reset method is as follows: 1. Turn the ignition switch to the "OFF" position. 2. Press and hold the "OK" button on the dashboard. 3. Turn the ignition switch to the "ON" position while keeping the "OK" button pressed for more than 10 seconds. 4. Release the "OK" button, and the maintenance light will be reset. Below is the maintenance schedule for Besturn X80: The Besturn X80 comes with two different displacement engines, 2.0L and 2.3L; the maintenance interval for both is 5,000 kilometers, meaning maintenance is required every 5,000 kilometers. If the maintenance light comes on, it indicates that the car needs maintenance.
Resetting the maintenance light on the Besturn X80 – I've tried it several times myself, so here's my experience. First, make sure you've completed routine maintenance like oil and filter changes, otherwise the light will come back on soon. The steps are pretty straightforward: Sit in the driver's seat, turn the key to the OFF position, and don't press any pedals. Then, press and hold the TRIP button on the left side of the steering wheel (the one for adjusting the instrument display) and keep it pressed. Next, slowly turn the key to the ON position, but don't start the engine. Keep an eye on the dashboard—the maintenance light will start flashing. Hold the button for about 10 seconds until the light completely turns off before releasing it. Finally, turn off the key, and you're done. If it doesn’t work the first time, you might not have held the button long enough, or the battery might be low. Try restarting the system if needed. Remember, this light is a reminder not to skip maintenance—regular upkeep can extend your car's lifespan.
Turning off the maintenance light isn't actually difficult, but I must remind you about safety precautions. If you're unfamiliar with the operation, avoid randomly pressing buttons as it might accidentally damage the car's electronic systems, leading to unnecessary repair costs. The usual method is: with the key in the OFF position, press and hold the TRIP button on the dashboard, then turn to the ON position and wait a moment. For details on the Besturn X80, you can check the user manual or find video tutorials online. However, if the light remains on after two attempts, it's likely a system malfunction, and it's best to drive to a 4S shop or professional auto repair point for inspection. By the way, the maintenance light comes on to ensure vehicle health; ignoring it may lead to engine problems, and regular oil changes can save you significant money.
As a new car owner, I also struggled with this. To reset the maintenance light, follow these steps: First, turn off the engine and switch the key to OFF. Then, press and hold the TRIP button without releasing it, turn the key to the ON position and wait a few seconds until the maintenance light goes off before letting go. Remember not to start the car during the process. If it doesn't work, it might be due to button wear or a system bug, and contacting the dealer directly is the safer solution. This light indicates it's time for maintenance, and addressing it early can prevent minor issues.
