How to reset the maintenance light on BAIC Senova X55?

[McEli]

To reset the maintenance light, press and hold the reset button "A" while stepping on the brake pedal. Do not start the car. When the characters "INSP" flash or the display screen blinks, continue to hold down button "A". Release the brake, start the car, and turn the switch back to the "Off" position. The reset process is now complete.

[LaEden]

I often handle such issues myself and find that resetting the maintenance light is actually quite simple. For the BAIC Senova X55, the reset method is generally as follows: First, sit in the driver's seat without pressing the brake, then press the start button once to illuminate the dashboard without starting the engine. At this point, you'll notice the maintenance light is still on. Next, locate the reset button on the steering wheel or the small switch on the side of the dashboard, and hold it down for about 5 to 10 seconds until the light turns off or starts flashing, indicating a successful reset. Keep in mind that the button location may vary depending on the model year—for example, the 2017 model uses the left steering wheel button, while the 2019 model might have it near the center console. So, I recommend checking the owner's manual beforehand to avoid mistakes. From my DIY experience, I found that the button can be too stiff and prone to sticking, so it's best to press it with a soft cloth wrapped around your finger to reduce wear. After resetting, don’t forget to perform regular maintenance, such as changing the oil and filters, which can extend the car's lifespan and prevent the light from coming back on. Always ensure the car is in a safe state before attempting any adjustments, and avoid randomly pressing other settings—if something goes wrong, repairs at a dealership can be costly.

[LaJoel]

I drove the Senova X55 for almost three years and figured out the maintenance light reset procedure several times. The standard steps are: sit in the car without starting the engine, just press the start button to power on the vehicle, at which point the maintenance reminder light will appear on the dashboard. Then locate the reset button on the right side of the steering wheel, press and hold it for about 6 to 8 seconds until the light automatically turns off or dims, indicating the reset is complete. The exact button position may vary by model—for example, higher trim versions have it on the left side, while base models require checking the manual. I recommend keeping a small tool handy in case the button malfunctions, like soft rubber gloves for better grip. After resetting, always double-check the vehicle condition, such as inspecting the oil dipstick, to minimize issues before long trips. Developing good habits, like changing the oil every 5,000 kilometers, can prevent frequent light activations. The process is simple but prioritize safety—ensure the car is parked on level ground before starting to avoid accidental rolling.

[Archie]

From a technical perspective, resetting the maintenance light is a basic operation. The method for the BAIC Senova X55 generally involves three steps: enter the car, turn on the ignition without starting the engine, hold the reset button for 5 to 7 seconds after the dashboard lights up, and the light will go off indicating success. The button is usually located on the left stalk of the steering wheel or next to the dashboard, while in newer models, it might be found in the touchscreen settings. After resetting, remember to check the vehicle's condition, as low engine oil level can trigger the light to come on prematurely. I've helped friends with similar cars a few times, and when the button is unresponsive, gently pressing it with a cotton swab usually solves the issue. Timely maintenance can also save on fuel costs and reduce carbon emissions.