How to reset the maintenance light on Audi S3?

1 Answers
DiMax
07/30/25 1:01am
Audi S3 maintenance light reset method: 1. Press and hold the button next to the odometer, turn ignition switch ON; 2. SERVICE or SERVICEIN will appear on the LCD display; 3. Release the button, press the button on the left side of the instrument panel (near the tachometer) to reset the display, and SERVICEIN10000MI will appear on the LCD; 4. Turn ignition switch to OFF position. For interior features, the Audi S3 comes with a three-spoke sport steering wheel, gray-white dashboard needles, combined with all-black interior, giving the new car's cabin a thoroughly sporty style.
Was this review help?
16
2
Share
More Forum Discussions

Why Can't the Car Start?

The reasons why a car cannot start include: starter motor failure; insufficient battery voltage; fuel pump damage; car gear stuck in D position; engine speed sensor (crankshaft position sensor) failure; excessive carbon buildup in the vehicle; or lack of antifreeze. Specific reasons are as follows: 1. Starter motor failure: The typical lifespan of a starter motor is around 100,000 kilometers. Prolonged use can lead to carbon brush wear, causing the starter motor to fail. Timely replacement of the starter motor is necessary. 2. Insufficient battery voltage: This prevents the starter from engaging the engine. The battery needs to be recharged promptly. 3. Fuel pump damage: This results in no fuel supply. The fuel pump must be replaced. 4. Car gear stuck in D position: This is a self-protection mechanism of the car to prevent it from lurching forward after ignition. Simply shift back to the normal gear position. 5. Engine speed sensor (crankshaft position sensor) failure: This causes the vehicle to lack high-voltage spark, preventing normal startup. Replacement is required. 6. Excessive carbon buildup in the vehicle: Regular highway driving can help reduce carbon buildup. 7. Lack of antifreeze: Adding water or low-quality antifreeze to the car can cause the entire cooling system to freeze in extremely cold winter conditions, leading to engine block cracking, water pump failure, inability to start, and damage to other engine components.
18
0
Share

Can I Register a New Car Purchased in Another City in My Hometown?

It is possible to register a car purchased in another city in your hometown. The specific requirements are as follows: Before registration, you must pay the vehicle purchase tax in advance at the local tax bureau, and then bring all the required materials to the vehicle management office to complete the procedures. The relevant information is introduced as follows: 1. The new car must pay compulsory traffic insurance at the place of purchase: According to relevant regulations, as long as the purchased vehicle has a formal invoice, a certificate of conformity, and has paid the purchase tax and compulsory traffic insurance, a new car purchased in any formal auto trading market nationwide can be registered in the place of household registration. However, the new car must pay compulsory traffic insurance at the place of purchase. 2. When buying a car in another city, you need to ensure that the materials provided by the 4S store are complete: After buying a car in another city, you need to ensure that the materials provided by the 4S store are complete, such as the car invoice, vehicle certificate of conformity, maintenance manual, etc. These things are indispensable. If the 4S store does not provide one of them, it will affect the subsequent registration and maintenance of the new car.
17
1
Share

How Many Kilometers Should a Car Typically Be Driven Before Replacement?

Household sedans are essentially the same models as taxis. Taxis are generally scrapped after running about 1 million kilometers. For household cars, assuming an annual mileage of 20,000 kilometers (an average of 55 kilometers per day, which is a figure many people cannot reach), it would take 30 years to reach 600,000 kilometers if the car is well maintained. If the annual mileage is 50,000 kilometers (136 kilometers per day), it would take 12 years to reach 600,000 kilometers. Therefore, most household cars are scrapped due to aging rather than excessive mileage. The compensation standards for cars being scrapped in accidents are as follows: 1. First category: When the repair cost exceeds 80% or more of the vehicle's value, the insurance company will settle the claim as a total loss. 2. Second category: The vehicle meets the mandatory scrapping standards. According to Article 4 of the 'Mandatory Scrapping Standards for Motor Vehicles,' registered motor vehicles shall be mandatorily scrapped under the following circumstances: First clause: After repair and adjustment, the vehicle still fails to meet the national safety technical standards for in-use vehicles; Second clause: After repair and adjustment or the adoption of control technologies, the vehicle's emissions or noise still fail to meet the national standards for in-use vehicles.
9
3
Share

What engine is used in the Zhonghua H530?

Zhonghua H530 is equipped with a 4A92S engine from Aerospace Mitsubishi, with a displacement of 1.6L, maximum power of 87kW/5600-6000rpm, and maximum torque of 151Nm/4000rpm. The 4A92S engine is Mitsubishi's new-generation small-displacement engine that replaces the 4G series. In China, it is mainly produced by Aerospace Mitsubishi and has been installed in many domestic brand models, with the most common being the 1.5L 4A91 (the one used in the Southeast Lingyue). Several previous models from Brilliance (such as the Junjie) used Mitsubishi's 4G series engines, so it's not surprising that the H530 now uses Mitsubishi's 4A9 series engine. The standard configuration of the 2017 Zhonghua H530 is as follows: 1. Safety features: driver/passenger airbags, seatbelt reminder, rear child seat interface, tire pressure monitoring, ABS anti-lock braking, brake force distribution, and brake assist. 2. Braking and suspension: The front and rear brakes of the 2017 Zhonghua H530 are ventilated disc and disc types, respectively, with a handbrake for parking. The front and rear suspensions of the 2017 Zhonghua H530 are MacPherson independent suspension and torsion beam non-independent suspension, with electric power steering.
10
0
Share

Do vehicle lights at night go from near to far?

When the illumination distance of vehicle lights at night goes from near to far, it indicates that the vehicle may have entered a curve with a mountain on one side. High beams illuminate much higher and farther than low beams, which is designed to light up higher and more distant objects. Therefore, low beams should be used on roads with street lighting, while high beams are appropriate for roads without illumination. Rapidly switching between high and low beams can alert drivers of oncoming vehicles. The following four situations require the use of hazard lights: 1. Temporary parking: When temporarily parked, hazard lights must be activated, and in some cases, warning signs should also be placed. If the vehicle is temporarily stopped to wait for someone or pick up items, hazard lights should be turned on to alert others of the parked vehicle. 2. When a vehicle is being towed due to a breakdown: Both the faulty vehicle and the towing vehicle must turn on their hazard lights; otherwise, they may face penalties such as fines or demerit points. Failure to activate hazard lights in this situation can make it difficult for trailing vehicles to discern the status of the vehicle ahead, increasing the risk of accidents. 3. When visibility is less than 100 meters: In northern regions, heavy fog in autumn and winter can reduce visibility to below 100 meters, necessitating the use of hazard lights. 4. When permitted by traffic authorities: Under certain special circumstances, with approval from traffic authorities, vehicles in a convoy may need to activate their hazard lights.
9
4
Share

What is the trunk size of the Jimny?

The trunk size of the Jimny is: depth is 200mm, width is 1300mm, and height is 770mm. It is an SUV model. Taking the 2015 Jimny as an example, its body dimensions are: length 3695mm, width 1600mm, height 1705mm, with a wheelbase of 2250mm and a fuel tank capacity of 40 liters. The 2015 Jimny features a front suspension with a three-link rigid axle and coil springs, and a rear suspension with a three-link rigid axle and coil springs. It is equipped with a 1.3L naturally aspirated engine, producing a maximum horsepower of 85 PS, maximum power of 62.5 kW, and maximum torque of 110 Nm, paired with a 5-speed manual transmission.
1
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.