How to reset the maintenance light on an imported Mercedes-Benz B200?

[AshleyDella]

Import Mercedes-Benz B200 maintenance light reset can be completed through the multifunction steering wheel buttons. Here is an introduction to the maintenance light: 1. Introduction: The maintenance light is a reminder function set by the manufacturer to alert the owner based on certain mileage or time intervals. 2. Steps: (1) With the engine turned off, press and hold the short-distance counter reset button located below the tachometer. (2) Turn the ignition switch to the ON position, release the short-distance counter reset button, and the display will show the "SERVICE" indicator. (3) Pull out the minute button on the clock, turn the minute button to the right, and the mileage display will appear on the screen. (4) Turn off the engine to reset the reminder message. (5) Turn the ignition switch to the ON position, and the "SERVICE" indicator will disappear.

[Corey]

I've been driving an imported Mercedes-Benz B200 for three years, and resetting the maintenance light is quite simple once you know how. First, sit in the driver's seat and turn the key to the second position (ignition switch), but don't start the engine. Then, use the scroll button on the right side of the steering wheel to enter the menu, find the maintenance option, usually labeled as 'Service' or 'ASSYST'. Select the option to reset the maintenance indicator light, and press and hold the OK button for a few seconds until the light goes off. The first time I did it, I was all thumbs and almost adjusted other settings by mistake, but now I'm much more skilled. After resetting, the system starts counting down again, preventing the light from staying on and falsely indicating a problem. I recommend doing this right after maintenance to save yourself the worry. If the light still doesn't go off, it might be due to an operation error or a minor circuit issue. In that case, consult a professional shop and check the manual—safety first, don't tinker randomly.

[HaileyLee]

I figured out the reset method for the Mercedes-Benz B200 through trial and error. Insert the key and turn it to the ON position without starting the engine. Look at the dashboard display menu. Use the up and down buttons on the left side of the steering wheel to navigate to the vehicle settings option, then select the reset service reminder in the service menu. Press and hold the center confirmation button for about three seconds until you hear a beep, indicating success. The light turning off means the reset is complete. I usually maintain my car myself, and learning this method saves time and money. The maintenance light reminds you to check the oil or other components. After resetting, it recalibrates the interval for monitoring the next cycle. Button positions may vary slightly for different model years. If your B200 is an older model, try referring to the owner's manual for detailed steps.

[VanJulia]

To reset the Mercedes-Benz B200 maintenance light quickly: Turn the key to the ON position without starting the engine. Press the menu button on the steering wheel to navigate to the settings area, enter the maintenance section, and select the reset option to confirm. The light turning off indicates success. I've reset it several times after the light came on—remember to do it promptly to avoid mistaking it for a fault. For any issues, refer to the manual or the official website guide.