How to Reset the Maintenance Light on a ZX Auto Grand Tiger Pickup?

What is the fuel consumption of the BYD Tang DM?

The fuel consumption of the BYD Tang DM is 6.5 liters per 100 kilometers. Here is more information about the BYD Tang DM: Body dimensions: The BYD Han is a B-segment car, with body dimensions of 4980 (4960)/1910/1495mm and a wheelbase of 2920mm. Design inspiration: The inspiration comes from the Chinese dragon, symbolizing not only speed and power but also leadership. Charging time: Using a household 220V power supply, it takes about 9 hours to fully charge, consuming approximately 15 kWh. At a professional charging station, it takes 15 to 30 minutes.

9

2

Share

How to Deal with Flood-Damaged Cars in Henan?

Once a car is flooded, immediately call the insurance company to report the incident. After receiving the call, the insurance company will send someone to the scene for inspection to assess the damage and discuss repair options. Contact the insurance company or a 4S shop and wait for the arrival of the tow truck. While waiting for the tow truck, you can disconnect the car's power to minimize further damage. It's crucial to contact a repair shop you are familiar with as early as possible to reduce financial losses.

1

Share

How Many Liters of Transmission Fluid Are Generally Needed?

Transmission fluid requires 6 to 10 liters. There are two main types of transmission fluid: 1. Manual transmission fluid, commonly referred to as gear oil: This is an important lubricant primarily composed of petroleum-based lubricating oil or synthetic lubricating oil, blended with extreme pressure anti-wear agents and oiliness agents. It is used in various gear transmission devices to prevent gear surface wear, scuffing, and seizing, thereby extending service life, improving power transmission efficiency, and reducing power loss. 2. Automatic Transmission Fluid (ATF): This refers to the specialized fluid used exclusively in automatic transmissions. ATF serves as the hydraulic fluid for the torque converter, the lubricating oil for the gear structure, and the hydraulic oil for the shifting mechanism. Under normal driving conditions, automatic transmission fluid should typically be replaced every 120,000 kilometers, while under severe driving conditions, it should be replaced every 60,000 kilometers.

1

0

Share

What are the symptoms of a faulty electronic throttle?

There are three main symptoms of a faulty electronic throttle: 1. If the electronic throttle pedal is damaged, the dashboard warning light will illuminate: The car's throttle pedal may become stiff, produce unusual noises when pressed, and may not return to its original position after being depressed; 2. A damaged electronic throttle pedal can cause the throttle pedal sensor to fail: The ECU will be unable to detect the throttle position, leading to unstable idling, throttle sticking, unresponsive acceleration, and making the car unusable; 3. If the throttle pedal data does not match the reference voltage, being either too high or too low, it indicates a possible fault in the electronic throttle pedal: The electronic throttle pedal contains two ICs, serving as the primary/secondary pedal sensors. When the pedal is not pressed, the primary IC reference voltage should be around 800mv, and when fully pressed, around 4900mv.

14

1

Share

What are the reasons for insufficient engine power in the Buick Envision?

If the Envision displays insufficient engine power, a fault code reader at a 4S dealership is required to read the error codes. Below are the reasons for insufficient engine power in the Envision: Electromagnetic Valve Failure: A faulty electromagnetic valve in the engine oil pan. Solution: Replace the faulty electromagnetic valve. System Issues: Problems with any component in the intake system, fuel system, or ignition system can potentially cause this issue. The Envision currently has 12 models available, divided into China V and China VI emission standards. The Envision is positioned as a midsize SUV, with body dimensions of 4686mm in length, 1839mm in width, and 1660mm in height, and a wheelbase of 2750mm.

11

3

Share

What is the mirror in a car called?

The mirror inside the car is called the rearview mirror. The functions of the rearview mirror include the following 3 points: 1. Judging distance: During driving, the side mirrors sometimes cannot clearly display the distance of vehicles behind. The rearview mirror allows for clearer judgment, enhancing safety; 2. Turning assistance: When preparing to overtake or change lanes, the turn signal is usually activated first. The rearview mirror can then be used to observe the vehicles behind. After assessing the driving conditions of the vehicles behind, safe lane changes can be made; 3. Emergency braking: If the vehicle ahead brakes suddenly, the rearview mirror is used to observe the vehicles behind. The driving distance can be adjusted based on their driving conditions to avoid rear-end collisions.

1

5

Share

How to Reset the Maintenance Light on a ZX Auto Grand Tiger Pickup?

What is the fuel consumption of the BYD Tang DM?

How to Deal with Flood-Damaged Cars in Henan?

How Many Liters of Transmission Fluid Are Generally Needed?

What are the symptoms of a faulty electronic throttle?

What are the reasons for insufficient engine power in the Buick Envision?

What is the mirror in a car called?

What are the components of automotive brake fluid?

How to Park Accurately When Reversing into a Garage?

What is the ampere rating of the Prado battery?

What are the differences between imported and domestically produced Mercedes-Benz vehicles?