How to Reset the Maintenance Light on a Toyota Levin?

3 Answers
KingstonLynn
07/28/25 7:09pm
Toyota Levin maintenance light reset method is as follows: 1. Press the "A" button and hold the brake pedal, neither should be released midway. 2. Do not start the engine, but the vehicle's power must be turned on. 3. At this point, the dashboard or characters will start flashing. 4. Continue holding the reset button "A" until "..." appears on the display. 5. Release the brake pedal and the "A" button simultaneously. 6. The maintenance light reset operation is complete, turn off the vehicle's power. The maintenance light reminds the owner that a new maintenance interval has been reached, and it is recommended to service the vehicle promptly. Some models can only be reset using the vehicle's dedicated computer system, and manual resetting of the maintenance light is not possible.
Was this review help?
18
1
Share
HarperLee
08/11/25 11:01pm
I'm a newbie owner driving a Leiling, and just encountered the maintenance light coming on while still learning how to reset it. Simply put, after getting in the car, don't start the engine—just turn the key to the ON position (power on but engine off). Then locate the TRIP or ODO button on the dashboard, press and hold it for a few seconds until the maintenance light starts flashing, then release. The light will go off. After resetting, make sure to perform maintenance promptly, like changing the oil, to avoid inaccurate reminders next time. The Leiling is designed to be quite user-friendly—if you forget to reset it by accident, it's no big deal, though the light staying on can be a bit annoying, but it won't affect driving safety. For newer hybrid versions, the steps might differ slightly, so it's best to check the owner's manual first to confirm the button location. Doing it yourself saves a trip to the dealership. Remember to service the car every 5,000 km for optimal performance.
Was this review help?
20
1
Share
Expand All
MacIris
09/30/25 5:02am
I've been driving my Leiling for several years, and resetting the maintenance light is a routine task. The steps are simple: park the car in a safe location, turn the key to the ON position, press the mileage reset button near the steering wheel, hold it for about five to ten seconds, and release it when the indicator light flashes to reset it to zero. This thing is mainly to remind you of regular maintenance, such as when the oil change is due, so it's more reliable to reset it immediately after maintenance. I once made the mistake of not pressing it firmly enough, but just doing it again solved the problem. The Leiling's onboard system is very robust, and the buttons are conveniently located near the dashboard. Also worth mentioning is that Toyota cars have high compatibility, so other models can follow the same steps. Develop the habit of recording maintenance dates in your phone calendar, so you'll know when the next one is due, saving time and keeping your car durable.
Was this review help?
4
1
Share
Expand All
More Forum Discussions

What are the differences between Lincoln MKZ and Lincoln Continental?

The differences between Lincoln MKZ and Lincoln Continental are: 1. Different levels: Lincoln MKZ is a mid-size car; Lincoln Continental is a mid-to-large-size car. 2. Different body dimensions: Lincoln MKZ has a body length of 4925mm, width of 1864mm, and height of 1477mm; Lincoln Continental has a body length of 5115mm, width of 1912mm, and height of 1492mm. 3. Different appearances: Lincoln MKZ features a chrome front grille, with a straight waistline running from the headlights through the entire body to the rear fender; Lincoln Continental has a chrome mesh front grille, with body side lines integrated with the door handles.
8
5
Share

What is the reason for the silent seat belt reminder in the Trumpchi GS5?

The reasons for the silent seat belt reminder in the Trumpchi GS5 are: 1. The seat belt alarm plug under the seat is loose or accidentally unplugged; 2. The seat belt socket is damaged; 3. Sitting too far forward causes the pressure sensor in the front passenger seat to mistakenly assume that no one is seated there; 4. The pressure sensor under the seat is damaged; 5. The vehicle speed does not reach 20 kilometers per hour, so no alarm is triggered. The Trumpchi GS5 is a medium-sized 5-door, 5-seat SUV with body dimensions of: length 4695mm, width 1885mm, height 1726mm, and a wheelbase of 2710mm. It is equipped with a 1.5T turbocharged engine and a 6-speed automatic transmission.
1
5
Share

What Causes an Oil Sensor Malfunction?

The causes of oil sensor malfunction are: 1. Insufficient engine oil level; 2. Dirty or viscous engine oil; 3. Overly thin oil or excessively high engine temperature; 4. Oil pipe leakage; 5. Incorrect opening pressure setting of the bypass valve (either too high or too low); 6. Faulty oil pressure sensor, pressure gauge, or electrical circuit; 7. Weak spring, sticking, or ball damage in the pressure relief valve or pressure limiting valve. Solutions for oil sensor malfunction include: 1. Topping up engine oil; 2. Replacing with higher-quality oil; 3. Inspecting and repairing the cooling system and oil pipes; 4. Replacing the pressure limiting valve. The oil sensor is a device that monitors the oil pressure in a vehicle's engine, and the data it collects aids in maintaining proper engine operation.
13
2
Share

What is the Assurance tire?

Assurance is a Goodyear tire. The types of Goodyear tires include: high-performance tires, sport tires, comfort tires, economy tires, highway tires, and off-road tires. The functions of tires are: 1. to bear the weight of the vehicle; 2. to ensure good adhesion between the wheels and the road surface; 3. to improve the vehicle's traction, braking, and passability; 4. to directly contact the road surface and work with the vehicle suspension to mitigate the impact during driving, ensuring good ride comfort and smooth driving. The maintenance methods for tires are: 1. frequently remove debris from the tire tread; 2. check the tire wear and replace them in time; 3. regularly check the tire pressure; 4. repair punctures promptly.
10
5
Share

What are the symptoms of a faulty car fuel pump relay?

Car fuel pump relay failure symptoms are: 1. Starter does not turn; 2. Starter has weak starting power; 3. Starter spins without engaging. The causes of car fuel pump relay failure are: 1. Severe battery discharge or short circuit; 2. Poor contact between starter commutator and brushes; 3. Open circuit, short circuit, grounding of starter relay coil, or poor contact of its terminals; 4. Loose wiring or poor internal contact of ignition switch; 5. Open circuit in starting system wiring, poor contact or disconnection of wires. The fuel pump relay uses a very small current to control high-power circuits, expands control range, and when the signal reaches a certain value, it can simultaneously switch, disconnect, or connect multiple circuits according to different contact group configurations to achieve automatic switching purposes.
19
0
Share

How are SUVs classified?

SUVs are classified based on their size, and can be divided into subcompact SUVs, compact SUVs, midsize SUVs, and full-size SUVs. Their respective body dimensions are as follows: 1. Subcompact SUVs have a wheelbase below 2500mm and a body length less than 4200mm; 2. Compact SUVs have a wheelbase between 2500mm and 2700mm, and a body length between 4200mm and 4600mm; 3. Midsize SUVs have a wheelbase between 2700mm and 2900mm, and a body length between 4600mm and 4800mm; 4. Full-size SUVs have a wheelbase between 2800mm and 3000mm, and a body length between 4800mm and 5000mm.
19
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.