How to Reset the Maintenance Light on a Toyota Crown?

What to do if the car inspection is overdue by one month?

If the car inspection is overdue by one month, you need to promptly go to the vehicle management office for a re-inspection. However, please note: Whether the inspection is overdue by one month or one day, it means the vehicle is no longer qualified to be driven on the road. Once you find that the vehicle inspection is overdue, you should immediately go for a supplementary inspection. Penalties related to overdue car inspections: Within three months: If the car inspection is overdue within three months, you can directly apply for a supplementary inspection. You will receive a verbal warning without a fine. Over three months but less than two years: If the car inspection is overdue for more than three months but less than two years, you will need to pay a fine ranging from 50 to 200 yuan, and 3 points will be deducted from your license. Over two years: If the car has not been inspected for more than two years, the vehicle's record will be canceled, and generally, a fine must be paid to restore it. Driving without timely participation in the annual inspection is considered illegal driving, and the vehicle may be impounded. If a car fails to obtain the motor vehicle inspection qualification mark for three consecutive inspection cycles, it will be forcibly scrapped.

2

3

Share

Is It Necessary to Install an Underbody Guard Plate on a New Car?

It is not necessary to install an underbody guard plate on a new car, but it can be added. Generally, the guard plate will not easily affect the engine's downward movement. A thin metal or plastic sheet cannot stop the force of the engine's downward movement, and the engine does not drop vertically but rather diagonally backward. Advantages of an underbody guard plate: 1. Reduces the risk of damage to underbody components caused by scraping or collisions. 2. Prevents the intrusion of mud and sand, effectively protecting the engine. 3. Effectively prevents the intrusion of rain, snow, and acidic water, protecting the engine or related underbody components from premature aging, corrosion, and rust. Disadvantages of an underbody guard plate: 1. Reduced heat dissipation performance, which may affect the engine's cooling to some extent. 2. Prone to causing abnormal noises due to prolonged use or installation issues, which may lead to loosening, displacement, and resulting noise. 3. Easy accumulation of foreign objects. Due to certain gaps, the upper part of the guard plate often gets stuck (with the engine bottom) or causes noise due to rolling objects (such as small stones) intruding. 4. Difficult to maintain. For example, routine maintenance for certain car models requires an additional "step" of removing and reinstalling the guard plate.

15

3

Share

What Causes the Steering Wheel to Become Heavier?

The reasons for a heavier steering wheel include issues with the power steering fluid, overly tight bearing alignment, and problems with the power assist unit. There are three key points for proper steering wheel usage: 1. Place both hands firmly on the left and right edges of the steering wheel: Grip naturally with fingers curled inward and thumbs extended straight along the wheel's edge, avoiding bending them inside. This grip positions the right hand closer to other controls for easier operation. Additionally, when the right hand operates other controls, the left hand can still effectively steer. 2. When turning the wheel, coordinate both hands with appropriate force: Use one hand as the primary mover and the other as support, pushing or pulling as needed. For a left turn, the right hand pushes left as the primary mover while the left hand pulls in support. When correcting the wheel after entering a new path, the right hand can again lead the return. 3. For continuous steering, alternate hands: For a sharp right turn, the left hand pushes right to the 1-2 o'clock position while the right hand pulls or slides a distance before quickly releasing and crossing over the left elbow to grip the 9-10 o'clock position, taking over as the primary mover. Simultaneously, the left hand rotates clockwise to the 5 o'clock position and pushes left. This alternating motion speeds up the turn. To straighten the wheel, reverse these actions accordingly.

5

4

Share

Where is the fuel tank cap switch on the Landwind X7?

Landwind X7 fuel tank cap switch is located on the side of the main driver's door in the cabin. Press the unlock button, then get out of the car and press the fuel tank cap inward to open it. Below is additional information about the fuel tank cap:1. The fuel tank cap refers to the box on the car used to store gasoline. It is square in shape, made of stainless steel, and has excellent sealing properties for easy storage. It is located at the rear of the vehicle.2. The manufacturer affixes a small label on the fuel tank cap indicating the type of fuel required for the vehicle.3. A small label on the fuel tank cap specifies the recommended tire pressure values for different vehicle loads.4. The fuel tank opening is designed to be inclined to address the issue of rainwater accumulation. Every vehicle's fuel tank cap area is equipped with a drainage hole, which serves a significant purpose.

10

4

Share

How to Drive Safely in Snowy Weather

When driving in snowy weather, the most important thing is to stay focused, avoid distractions, maintain a steady speed, keep a safe distance, and use engine braking to reduce speed. Snow-covered roads often have low friction coefficients, making it easy for wheels to skid or slide sideways, which compromises vehicle stability and braking performance. Therefore, heightened attention is crucial. Below are some key precautions for driving in snowy conditions: 1. Reduce speed: Due to extremely low traction on icy roads, drivers should slow down and maintain a safe distance—three times the usual distance on dry roads—to prevent skidding or collisions. 2. Utilize engine braking: When decelerating or stopping on snowy roads, rely on engine braking to reduce speed. Avoid using the foot brake if possible; if necessary, apply it gently and intermittently, supplementing with the parking brake. 3. Turn the steering wheel slowly: When making turns on icy roads, ease off the accelerator in advance to reduce speed smoothly. Steer gently without sudden movements, and widen the turning radius when road conditions allow to minimize wheel skidding. 4. Slow down early when meeting other vehicles: Choose a wide, safe section of the road, slow down in advance, hold the steering wheel steady, and pass slowly on the right side while maintaining a generous lateral distance from other vehicles and the roadside. If necessary, stop and yield. If the meeting point is unsafe, do not force it—instead, one vehicle should reverse to make way rather than compete for space. 5. Avoid overtaking on snowy roads: As a rule, overtaking is not recommended on icy roads. If absolutely necessary, choose a wide, flat, and less snowy section, wait for the leading vehicle to slow down and yield, and never force an overtake at high speed to prevent accidents.

12

3

Share

Which country produces Ford cars?

Ford is an American automobile brand. Other information about Ford is as follows: 1. Ford's SUVs: Explorer, Kuga, EcoSport, Everest, Edge, Territory, and Escape. 2. Ford's sedans: Mondeo, Focus, Escort, Taurus, etc. 3. Ford's famous sports car: This car is called the Mustang, which is also one of the three major American muscle cars. The Mustang sold in China is the 2.3T version, and its 2.3-liter turbocharged four-cylinder engine is the same as the one used in the Focus RS. It is one of the three major American muscle cars.

4

5

Share

How to Reset the Maintenance Light on a Toyota Crown?

What to do if the car inspection is overdue by one month?

Is It Necessary to Install an Underbody Guard Plate on a New Car?

What Causes the Steering Wheel to Become Heavier?

Where is the fuel tank cap switch on the Landwind X7?

How to Drive Safely in Snowy Weather

Which country produces Ford cars?

What are the symptoms of a faulty DSG flywheel?

Why is it difficult to shift into first gear?

What are the precautions for the first car maintenance?

What Causes an Automatic Transmission to Not Move When in Gear?