How to Reset the Maintenance Light on a Suzuki Vehicle?

1 Answers
AaliyahFitz
07/30/25 3:32am
First, turn on the ignition switch of the Suzuki vehicle, then press and hold the indicator selection button on the right side for more than 5 seconds. The instrument display will flash "OIL" once and then continue to display. Release the indicator selection button, then quickly press the button 5 times within 2 seconds. Finally, "OIL" will flash 3 times and then turn off, completing the reset operation.
Was this review help?
6
3
Share
More Forum Discussions

How far can you drive when the fuel gauge turns red?

When the fuel gauge turns red, you can still drive for 30 to 50 kilometers. The red fuel gauge light indicates that the car's fuel level is low and requires refueling. The methods to handle a red fuel gauge light are: 1. Control the speed reasonably; 2. Reduce the load on the vehicle; 3. Avoid using the air conditioning; 4. Close the windows to reduce wind resistance; 5. Choose good road conditions as much as possible, minimize bumps, and maintain a steady speed; 6. Drive smoothly to reduce unnecessary braking; 7. Avoid traffic congestion. The precautions for refueling a car are: 1. Refuel in the morning or evening to avoid direct sunlight at noon; 2. Add more fresh fuel before long-distance trips; 3. Do not exceed the upper limit of the fuel tank when refueling.
3
2
Share

How to Deal with a Car Overheating?

Car overheating can be handled by: 1. Pulling over to the side of the road and letting the engine idle for a while; 2. Cooling the radiator with water before turning off the engine and replacing the belt; 3. Waiting for the engine to cool down completely before replacing the hose and adding coolant. Car overheating refers to a situation where the engine's operating temperature exceeds the normal working temperature, affecting the machine's normal operation and potentially damaging it. The causes of car overheating include: 1. The impact of hot weather; 2. Overloaded air conditioning operation and faulty cooling components; 3. Radiator leakage; 4. Lack of coolant or deteriorated coolant; 5. Blockage in the coolant circulation system; 6. Thermostat failure; 7. Engine water pump failure.
2
1
Share

Can the Kawasaki H2R Outrun an F1 Car?

Depending on the track conditions and the specific F1 model, the answer to whether the Kawasaki H2R can outrun an F1 car varies. Here are some details about the Kawasaki H2R: 1. Body Parameters: The Kawasaki H2R measures 2070*1160*770mm (L*H*W), with a seat height of 830mm and a ground clearance of 130mm. 2. Vehicle Performance: The Kawasaki H2R is equipped with a 998cc, 4-stroke, liquid-cooled engine, delivering a maximum horsepower of 310 HP, a peak power output of 228 kW, and a maximum torque of 165 N·m. Thanks to its supercharger technology, the H2R can easily reach 400 km/h when the electronic speed limiter is disabled.
15
2
Share

How to Maintain the Battery?

Methods for maintaining the battery include: 1. Regularly clean the dust and oil stains from the car battery terminals and apply specialized grease to protect the wiring harness; 2. Periodically inspect the battery accessories and connecting circuits; 3. After turning off the car, minimize the use of electrical equipment inside the vehicle; 4. Check the car battery through the observation hole on the battery and replace it regularly; 5. If the vehicle is not used for an extended period, start the car periodically. The functions of the battery are: 1. To provide the starting current to the starter when starting the engine; 2. To assist the generator in supplying power to electrical equipment when the generator is overloaded; 3. To supply power to electrical equipment when the engine is idling; 4. To protect the electrical appliances used in the car.
11
5
Share

What are the four modes of BYD Qin DM-i?

BYD Qin equipped with the second-generation DM technology has four working modes, namely EV+ECO, EV+SPORT, HEV+ECO, and HEV+SPORT. Especially in HEV+ECO mode (under different working conditions, different power distributions are made to achieve optimal comprehensive economy.), free switching can be achieved. The following are the relevant details: 1. Starting speed: When the starting speed is below 40KM/H, it is driven by pure electric power; when the speed exceeds 40KM/H and the engine is in the economic fuel consumption zone (1500-3500 rpm), it is driven by fuel; 2. During acceleration: During acceleration or climbing, the engine speed gradually increases, and the motor responds faster than the engine, responding before the engine leaves the economic fuel consumption zone, assisting the engine to keep it within the economic fuel consumption zone.
15
2
Share

How is liability determined when a leading vehicle changes lanes and is hit by a following vehicle?

During driving, the liability division when a leading vehicle changes lanes and is hit by a following vehicle: 1. The leading vehicle changes lanes illegally: According to relevant laws in China, how liability is divided when a leading vehicle changes lanes and is hit by a following vehicle depends on the specific circumstances. If the leading vehicle changes lanes illegally, such as changing lanes in a solid line section or a no-lane-change section, the leading vehicle generally bears full responsibility. 2. The following vehicle fails to maintain a safe following distance: If the lane markings are clear, and the leading vehicle has successfully and smoothly merged into the lane, but the following vehicle fails to fulfill its responsibility for safe driving and hits the leading vehicle, it constitutes a rear-end collision, and the following vehicle bears full responsibility.
15
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.