How to reset the maintenance light on a Soueast DX3?
1 Answers
Soueast DX3 maintenance light manual reset method is as follows: 1. Turn on the ignition switch, and while the OIL symbol is displayed on the combination meter information display, press and hold the "MODE button" for more than 5 seconds. 2. After the OIL symbol starts flashing, quickly press the "MODE button" five or more times. 3. The OIL symbol will flash three times and then turn off, the maintenance reminder alarm light will turn off, and the reset operation is completed. Here is more information about the maintenance light: 1. The "SERVICE" sign on the instrument panel display is the maintenance cycle indicator. When the ignition switch is in the ON position, the "SERVICE" sign on the display flashes, and the sign disappears after starting the engine, indicating that the vehicle should be serviced. After maintenance, the maintenance light should be reset. 2. Modern vehicle computers have maintenance mileage reminders. If the mileage reaches the specified number without maintenance, the maintenance light will come on. After maintenance, the service station will help you reset the maintenance light to start recording the driving mileage, and it will remind you at the next maintenance mileage. If you do not go to the service station, you can also reset the maintenance light by yourself according to the instructions in the manual. If it is not reset, the maintenance mileage cannot be recorded.